a few problems
Hello to everybody.
I started working with linux at version 0.97 (the old SLS relase and MCC
release).
Now things are getting a litle more easy and rich but I have a few problem
I would like to solve.
I am running slink 2.1r3 with a 2.2.14 kernel and I have a
486DX4 with a Trident TGUI9440AGI 1Mb memory and an old VGA monitor
(monochrome TARGA TM1410).
1) While in W95 I can run 640x480 in XFree3.3.2.3
I must run 640x400 otherwise a part of the screen goes out the monitor
I tried vidtune but no way. With 640x400 it uses a dotclock of 25.18.
I include the starting message with mode 640x400
2) I tried to replace exim with qmail but I could not configure the
MTA because when unpacked it complains about the host name which is
not fully qualified. How could install it for a machine with no
permanent link but which connect to a ISP ? I installed also ucsp
and serial mail.
3) When I switched from 2.0.36 my ide CDROM was changed from 36X to 24X
and I do not understand why.
Thank you very much
ALberto Meroni
XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs,
tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i,
tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426,
clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067, oti077,
oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401,
cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge,
s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200,
ct64300, generic
(using VT number 7)
XF86Config: /root/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc102"
(**) XKB: layout: "us"
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3
(**) SVGA: Graphics device ID: "Primary Card"
(**) SVGA: Monitor ID: "Primary Monitor"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
(--) SVGA: PCI: Trident TGUI 9440 rev 227, Memory @ 0xfbc00000, MMIO @ 0xfbbf0000
(--) Trident chipset version: 0xe3 (TGUI9440AGi)
(--) SVGA: Revision 0.
(--) SVGA: Using Trident programmable clocks
(--) SVGA: chipset: tgui9440agi
(--) SVGA: videoram: 1024k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 45.000 MHz
(**) SVGA: Mode "640x480": mode clock = 25.180
(--) SVGA: Virtual resolution set to 640x480
(--) SVGA: Using Linear Frame Buffer at 0x0fbc00000, Size 1MB
(--) SVGA: Using Graphics Engine.
(--) SVGA: Using 1024 byte display width.
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: CPU to screen color expansion (bitmap, TE/NonTE imagetext, TE/NonTE polytext)
(--) SVGA: XAA: Using 8 128x30 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: General lines and segments
waiting for X server to shut down FreeFontPath: FPE "/usr/X11R6/lib/X11/fonts/misc:unscaled" refcount is 2, should be 1; fixing.
Reply to: