Re: installing two NIC's
On Wed, 05 Apr 2000 14:20:54 PDT, Beavis writes:
>using=20
>intel pro 10/100 --eepro100 works great!!
is that an ISA or PCI card?
if it´s the former, you could set IRQ 10 to "used" in the bios,
every bios of a pci-capable machine that I know of can do either
that or assign a fixed irq to the pci-slot.
if they´re both PCI-cards, try swapping them around, best trick
for me is to get the graphics card between the nic´s.
>linksys 10/100 -- trying to use ne2k-pci=20
if you´re not sure if that´s the correct driver look at
´cat /proc/pci´
and, please, no html in mails.
hth,
&rw
--
/ Robert Waldner <Waldner@KPNQwest.at> | Phone: +43 1 89933 0 Fax x533 \
\ KPNQwest/AT tech staff | Diefenbachg. 35 A-1150 Wien /
Reply to: