Re: Help - efax and USR Sportster
I had trouble with efax also until I used the version from the unstable
distribution. The version from potato didn't work well with my modem
(an older Supra). So, if you're not using the one from unstable, you
might want to give that a try.
Gerry
On Tue, 11 Jan 2000, Colin Telmer wrote:
> I am having trouble getting my USR fax modem to work with efax. The output
> from trying to send a simple one page fax is below and the log file is
> attached. Does anyone recognize anything obviously wrong? Any help would
> be gratefully appreciated. Cheers, Colin.
>
> telmer:~$ fax send 7827136 letter.001
> efax: Tue Jan 11 16:52:13 2000 efax v 0.9 Copyright 1999 Ed Casas
> efax: 52:13 opened /dev/ttyS1
> efax: 52:15 using USRobotics Sportster Voice 33600 Fax RS Rev. 2.0 in class 1
> efax: 52:15 dialing T7827136
> efax: 52:24 connected
> efax: 52:25 Warning: bit-reversed HDLC frame, reversing bit order
> efax: 52:25 received NSF - answering features
> efax: 52:26 received NSF - answering features
> efax: 52:27 received CSI - answering ID
> efax: 52:27 remote ID -> 613 782 8513
> efax: 52:27 received DIS - answering capabilities
> efax: 52:27 remote has no document(s) to send, and can receive
> efax: 52:27 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
> efax: 52:27 remote 196lpi 9600bps 8.5"/215mm any 2D ECM-64 - 10ms
> efax: 52:27 session 196lpi 9600bps 8.5"/215mm any 1D - - 10ms
> efax: 52:27 sent TSI - caller ID
> efax: 52:27 sent DCS - session format
> efax: 53:01 Error: timed out after waiting
> efax: 53:01 sent TCF - channel check of 1800 bytes
> efax: 53:01 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
> efax: 53:01 remote 196lpi 9600bps 8.5"/215mm any 2D ECM-64 - 10ms
> efax: 53:01 session 196lpi 9600bps 8.5"/215mm any 1D - - 10ms
> efax: 53:04 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
> efax: 53:04 remote 196lpi 9600bps 8.5"/215mm any 2D ECM-64 - 10ms
> efax: 53:04 session 196lpi 9600bps 8.5"/215mm any 1D - - 10ms
> efax: 53:07 Error: no command/response from remote
> efax: 53:10 Error: timed out after command: +FTH=3
> efax: 53:15 Warning: timed out after command: H
> efax: 53:15 failed -> letter.001
> efax: 53:21 sync: dropping DTR
> efax: 53:24 done, returning 3 (invalid modem response)
> There were errors (see T7827136.log).
>
> --
> Colin Telmer, Ottawa, Ontario, Canada
> <mailto:telmerco@telmer.com>
> <http://www.telmer.com>
>
Reply to: