[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: debian-user-digest Digest V99 #2082



Did you check the bootprompt HOWTO? There are sometimes special
parameters for SCSI cards.

The kernel won't compile with multiprocessor support on the install--
it'll just use the first processor. So you'll need to recompile after
your install with multiprocessor support.

Regards,

glen


> Subject: Problems with Asus P2B-DS/350 and double PIII 450
> Date: Wed, 1 Dec 1999 11:56:24 +0100 (MET)
> From: Enrico Zini <zinie@CS.UniBO.IT>
> To: debian-user@lists.debian.org
> 
> Hello!
> 
> I have a dual Pentium III 450 system with an Asus P2B-DS/350 main board,
> in which I removed everything but the floppy drive and the IDE CD-Rom,
> master on the second channel.
> 
> The standard Debian boot disk hangs probing the Adaptec SCSI card bundled
> in the main board; I tried making custom boot kernels with 2.2.13 and
> everything hangs asking if I have a color monitor.
> 
> I'm trying to build the smallest possible 2.2.13 boot kernel for that
> server, but I have no idea what could be the cause.
> 
> Is there some boot problem HOWTO or some other source of information about
> problems booting linux or hardware problems with Linux in general? Windows
> NT boots, installs and seems to work fine.
> 
> Is there some known problem with Linux and this Asus mainboard, or with
> double Pentium III?
> 
> TIA, Enrico
> 
-- 
Glen S Mehn		glen@gomotech.com
GoMo Technologies Systems Administrator	
Can your email do this? http://www.gomomail.com


Reply to: