Re: hda: irq timeout
On Tue, Oct 19, 1999 at 09:05:17AM +0200, E.L. Meijer Eric" wrote:
> On Mon, Oct 18, 1999 at 04:58:56PM +0200, Peter Weiss wrote:
> >
> > Hello,
> >
> > running kernel 2.2.12 on a new machine I found the following kernel
> > messages in the syslog file with decreasing time intervalls:
> >
> > Oct 18 16:28:38 Winona kernel: ide0: reset: success
> > Oct 18 16:30:45 Winona kernel: hda: irq timeout: status=0xd0 { Busy }
> > Oct 18 16:30:47 Winona kernel: ide0: reset: success
> > Oct 18 16:33:15 Winona kernel: hda: irq timeout: status=0xd0 { Busy }
Hi Eric,
I had the same with an overclocked board: the PCI speed was too high
and it gave this kind of errors; actually, I've a board on which
clock is 105Mhz => PCI=35MHz, and I still have this kind of error,
from time to time.
The only PB it leads was about udma33 HD's speed: if I don't use
hdparm (in the hwtools package), which has an "hwtools" executable
in /etc/rc.boot; when this error occurs, the speed falls to 4MB/s
instead of 14.8MB/s.
As the data are not corrupted at all, I don't really care.
JY
--
Jean-Yves F. Barbier <jybarbier@wanadoo.fr>
Different all twisty a of in maze are you, passages little.
Reply to: