[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: eth1 can't be loaded

Take a look at the output of dmesg and see if there are any other messages being
generated which might indicate the problem. Perhaps it wants an IRQ it can't get? Have
you installed any new hardware into the machine?

Patrick Kirk wrote:

> Hi all,
> Does this look like a hardware failure on a NIC?  I'm getting a little
> desperate now as the kids will be most upset if they can't browse the
> Teletubbies sites over the weekend!
> enterprise:/lib/modules/2.0.36/net# ifconfig eth1 netmask
> 255.255.255.
> 0 broadcast
> SIOCSIFFLAGS: Resource temporarily unavailable
> enterprise:/lib/modules/2.0.36/net# cat /etc/modules
> # /etc/modules: kernel modules to load at boot time.
> #
> # This file should contain the names of kernel modules that are
> # to be loaded at boot time, one per line.  Comments begin with
> # a `#', and everything on the line after them are ignored.
> # An entry named `auto' will cause the system to start kerneld immediately.
> # Kerneld then loads modules on demand. `noauto' disables kerneld
> completely.
> #auto
> ne2k-pci
> tulip
> ip_alias
> psaux
> --
> Unsubscribe?  mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null

Jens B. Jorgensen

Reply to: