Configuring the E
Hey all,
I've got X apparantly working on the Viper 770. Now I need a wm and would
like to use E. To double check, my latest probe of the startx is below.
After that I get a message saying it can't find a wm or term emulator.
I've got the econfigedit package installed but don't know where and there's
no .xsession on root or my personal acct.
TIA -- Greg.
-----------------------------------------------------
XFree86 Version 3.3.4 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 13 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, ET4000, ET4000W32,
ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p,
ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10,
wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202,
sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530,
sis620, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd,
blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228,
ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440,
video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097,
NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000,
ct64200, ct64300, mediagx, V1000, V2x00, p9100, spc8110, i740,
i740_pci, Voodoo Banshee, Voodoo3, generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) XKB: rules: "xfree86"
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3, Chorded middle button
(**) SVGA: Graphics device ID: "Diamond Viper 770 16M"
(**) SVGA: Monitor ID: "Optiquest V95"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi"
(--) SVGA: PCI: NVidia Riva TNT2 rev 17, Memory @ 0xe2000000, 0xe4000000
(--) SVGA: chipset: RIVA TNT2
(--) SVGA: videoram: 16256k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 350.000 MHz
(**) SVGA: Mode "1600x1200": mode clock = 202.500
(--) SVGA: Virtual resolution set to 1600x1200
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: RIVA TNT2: Using hardware cursor
Reply to: