Re: CDRW 8100i help
Hi,
On Wed, 25 Aug, 1999 à 02:16:46AM -0500, Geocrawler.com wrote:
> This message was sent from Geocrawler.com by "Joakim Svensson" <jocke1s@earthling.net>
> Be sure to reply to that address.
>
> Hi all,
[...]
> I am wondering if anyone could give me some
> ideas if something is wrong with my CDRW setup.
>
> Below are some output from booting:
>
> Linux version 2.2.10 (...snip...)
> (..snip..)
> hda: IBM-DTTA-371010 , ATA DISK drive
> hdc: CD-ROM CDU4011 , ATAPI CDROM drive
> hdd: Hewlett-Packard CD-Writer Plus 8100, ATAPI CDROM drive
> (...snip...)
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> scsi : 1 host.
> Vendor: CD-ROM Model: CD-ROM CDU4011 Rev: UY04
> Type: CD_ROM ANSI SCSI revision: 02
> Vendor: CD-ROM Model: CD-ROM CDU4011 Rev: UY04
> Type: CD_ROM ANSI SCSI revision: 02
> Vendor: CD-ROM Model: CD-ROM CDU4011 Rev: UY04
> Type: CD_ROM ANSI SCSI revision: 02
> Vendor: CD-ROM Model: CD-ROM CDU4011 Rev: UY04
> Type: CD_ROM ANSI SCSI revision: 02
> Vendor: CD-ROM Model: CD-ROM CDU4011 Rev: UY04
> Type: CD_ROM ANSI SCSI revision: 02
> Vendor: CD-ROM Model: CD-ROM CDU4011 Rev: UY04
> Type: CD_ROM ANSI SCSI revision: 02
> CD-ROM Model: CD-ROM CDU4011 Rev: UY04
> Type: CD_ROM ANSI SCSI revision: 02
> Vendor: HP Model: CD-Writer+ 8100 Rev:1.0g
> Type: CD-ROM ANSI SCSI revision: 02
> scsi0: channel 0 target 1 lun 1 request sense failed, performing reset.
> SCSI bus is being reset for host 0 channel 0.
> scsi: detected total.
> (...snip...)
>
I think that you've enable the option to probe all SCSI LUN. It's only
useful for multi-cd readers. Your CD reader will appears only one time
and you won't have the error : "scsi0: channel 0 target 1 lun 1 request sense
failed,". I hope that this solve your problem.
--
( >- Laurent PICOULEAU -< )
/~\ lcrpic@a2points.com /~\
| \) Linux : mettez un pingouin dans votre ordinateur ! (/ |
\_|_ Seuls ceux qui ne l'utilisent pas en disent du mal. _|_/
Reply to: