Re: confusing X problem

To: Colin Marquardt <colin.marquardt@gmx.de>
Cc: debuser <debian-user@lists.debian.org>
Subject: Re: confusing X problem
From: Patrick Olson <compman@internetcds.com>
Date: Wed, 18 Aug 1999 17:22:23 -0700 (PDT)
Message-id: <[🔎] Pine.LNX.3.96.990818160839.19214C-200000@picard.internetcds.com>
Reply-to: Patrick Olson <compman@internetcds.com>
In-reply-to: <[🔎] 87iu6darj4.fsf@ashwork.colinathome.de>

On 18 Aug 1999, Colin Marquardt wrote:

> I would first get rid of xdm, then run 

I'll remove the package for now.

>    X -probeonly 2> my_x-probe.log

Console screwed up vertically when command prompt returned, as usual. 
Monitor power light goes dim when I just run "X".  As always, XF86Config
posted at http://home.internetcds.com/~compman/XF86Config

> Then post the file my_x-probe.log (which shouldn´t be too long) here.

It is attached, rather than in the message.  It doesn't show the strange
"POWER ON" and "POWER OFF" messages that I get when running X without
probeonly.

> What is printed on the biggest chip of this card (or have you already
> posted this?)

To be honest, I just wrote down the name (Diamond Viper Pro Video) and
stuffed the thing in the computer.  I'll look...

Several large chips:
1.  IBM chip with these numbers on it:
	8190429   9314
	37RGB525L-17CC
	1944601570

2.  Weitek Power 9100
	9100-PFP
	N4E (Greek letter delta) 9447B
	WEITEK - H.K.

3.  I think this is the clock chip (it's smaller than I expected):
	IC Designs 2061ASC-1
	9449LGQ

I just noticed that while the BIOS chips says "Viper Pro Video" the card
says "Viper Pro PCI".

There's another chip on the other side.  It's very similar to the other
Weitek chip. 

Weitek Video Power
	9130-PFP
	P1DL (Greek letter delta) 9445P
	WEITEK - USA

While I'm at it, the FCC ID is FTUPCI91K525 

> Maybe also worth trying: I don´t know whether the big hardware support
> database at www.suse.de is also available in english---if not, I could
> look it up for you.

I started at www.suse.com but the actual database is at
http://cdb.suse.de/cdb/english/

The results:

"This component is probably supported by XFree86 (since version 3.3.3),
module svga"
"This component is supported by Accelerated-X"

Thank you,
Patrick Olson

XFree86 Version 3.3.4 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 13 1999
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF] 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, ET4000, ET4000W32,
      ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p,
      ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
      ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10,
      wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202,
      sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530,
      sis620, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
      tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
      tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
      tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
      cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd,
      blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228,
      ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440,
      video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
      s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097,
      NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
      ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000,
      ct64200, ct64300, mediagx, V1000, V2x00, p9100, spc8110, i740,
      i740_pci, Voodoo Banshee, Voodoo3, generic
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: MouseSystems, device: /dev/ttyS0, baudrate: 1200
(**) Mouse: buttons: 3
(**) SVGA: Graphics device ID: "My Video Card"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) SVGA: PCI: Weitek P9100 rev 0, Memory @ 0xe0000000
(--) SVGA: P9X00: Power9100 A4 and VideoPower9130 at PCI BUS
(--) SVGA: P9X00: Linear Region at base: 0xE0000000
(--) SVGA: P9X00: 2 MBytes VRAM in 2 Banks of 256Kx? VRAM-Chips
(--) SVGA: P9X00: Half-size VRAM-Shift-Registers
(--) SVGA: P9X00: 64 Bit IBM RGB525 DAC found
(--) SVGA: P9X00: ICD 2061A clockchip found
(--) SVGA: chipset:  p9100
(--) SVGA: videoram: 2048k
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 170.000 MHz
(**) SVGA: Mode "800x600": mode clock =  60.750
(**) SVGA: Mode "640x480": mode clock =  45.800
(--) SVGA: Virtual resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024

Reply to:

References:
- Re: confusing X problem
  - From: Colin Marquardt <colin.marquardt@gmx.de>

Prev by Date: Re: modem
Next by Date: Re: how to format mySeagate ST33210A
Previous by thread: Re: confusing X problem
Next by thread: More Netscape Stuff
Index(es):
- Date
- Thread