[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: how to configure atapi cdrom?



David Brode wrote:
> 
> I recently purchased a new atapi cdrom (Samsung model SCR-3231) and I'm
> having trouble finding a driver for it.  According to the CDROM HOWTO at 3.1,
> 
> _______________________________________________
> 3.1 ATAPI CD-ROM Drives
> ATAPI (ATA Packet Interface) is a protocol for controlling mass storage
> devices. It builds on the ATA (AT Attachment) interface, the official ANSI
> standard name for the IDE interface developed for hard disk drives. ATAPI
> is commonly used for hard disks, CD-ROM drives, tape drives, and other
> devices. Currently the most popular type of interface, it offers most of
> the functionality of SCSI, without the need for an expensive controller or
> cables.
> 
> The Linux kernel has a device driver that should work with any ATAPI
> compliant CD-ROM drive. Vendors shipping compatible drives include Aztech,
> Mitsumi, NEC, Sony, Creative Labs, and Vertos. If you have recently
> purchased a CD-ROM drive, especially if it is quad speed or faster, it is
> almost guaranteed to be IDE/ATAPI.
> 
> Linux also has an IDE SCSI emulation kernel driver that makes an IDE/ATAPI
> device appear in software to be a SCSI device, allowing the use of a SCSI
> device driver instead of the native ATAPI driver. This is useful if you
> have an ATAPI device for which no native driver has been written (for
> example, an ATAPI PD-CD or CDR drive); you can then use this emulation
> together with an appropriate SCSI device driver.
> _______________________________________________
> 
> How do I apply this?  My Debian kernal (2.0.36) doesn't recognize the drive
> upon startup.  When I go into modconf and try to select cdrom drivers, it
> doesn't have a listing for Samsung drives, nor does it list a generic ATAPI
> driver.  Regarding the third paragraph of the HOWTO, I don't understand
> exactly what steps I'm supposed to take to get the atapi cdrom recognized
> as a SCSI device.
> 
> How do I get this drive working?  All help appreciated.
-----------------------------------------------
Recompile the kernel, selecting the approriate items in "make config"
This type of peripheral should not be attempted as a module, in my
opinion, as the kernel will handle the drive better.
-- 
John Foster
AdVance-Computing Systems
jfoster@augustmail.com
ICQ# 19460173


Reply to: