Re: X server on a Compaq Presario 1235
for the neomagic cards on compaq presarios....(i have the 1680) you can
now use the svga server....get it from the unstable tree or get it from
xfree86.org......there will be no new neomagic-xserver i think because the
hardware specs were released to the xfree86 people so they incorporated it
into the svga server.....
here is my xf86config file for reference.....
regards,
jd?
ps sorry if it gets mangled ..... ;)
==================
Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath
"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath
"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath
"/usr/X11R6/lib/X11/fonts/Type1/" FontPath
"/usr/X11R6/lib/X11/fonts/Speedo/" FontPath
"/usr/X11R6/lib/X11/fonts/75dpi/" FontPath
"/usr/X11R6/lib/X11/fonts/100dpi/"# ModulePath
"/usr/X11R6/lib/modules"EndSection#Section "Module"# Load
"xf86Jstk.so"#EndSectionSection "ServerFlags"# NoTrapSignals#
DontZap# DontZoom# DisableVidModeExtension#
AllowNonLocalXvidtune# DisableModInDev#
AllowNonLocalModInDevEndSectionSection "Keyboard" Protocol "Standard"
AutoRepeat 500 5 XkbDisable XkbKeymap
"xfree86(us)"EndSectionSection "Pointer"# Protocol "Microsoft"#
Device "/dev/ttyS0" Protocol "PS/2" Device "/dev/psaux"
Emulate3Buttons Emulate3Timeout 50EndSectionSection "Monitor"
Identifier "Generic Multisync" VendorName "Unknown" ModelName
"Unknown" HorizSync 30-64 VertRefresh 50-100# 640x480 @ 60 Hz,
31.5 kHz hsyncModeline "640x480" 25.175 640 664 760 800 480 491
493 525# 800x600 @ 60 Hz, 37.8 kHz hsyncModeline "800x600" 40 800
840 968 1056 600 601 605 628 +hsync +vsync# 1024x768 @ 60 Hz, 48.4
kHz hsyncModeline "1024x768" 65 1024 1032 1176 1344 768 771 777
806 -hsync -vsyncEndSectionSection "Device" Identifier
"NeoMagic"# Chipset "NM2160"# IOBase 0xfea00000# MemBase
0xfd000000 VideoRam 2048# DacSpeed 90# Option "linear"#
Option "nolinear"# Option "sw_cursor"# Option "hw_cursor"#
Option "no_accel"# Option "intern_disp"# Option
"extern_disp"# Option "mmio"# Option "no_mmio"#
Option "lcd_center"# Option "no_stretch"EndSectionSection "Screen"
Driver "svga" Device "NeoMagic" Monitor "Generic
Multisync" Subsection "Display" Depth 24 Modes
"800x600" "640x480" virtual 1024 768 EndSubsection Subsection
"Display" Depth 16 Modes "1024x768" "800x600"
"640x480" virtual 1024 768 EndSubsection Subsection "Display"
Depth 8 Modes "1024x768" "800x600" "640x480" virtual
1024 768 EndSubsectionEndSection
Reply to: