Re: Help! More problems compiling kernel
Subject: Re: Help! More problems compiling kernel
Date: Mon, Apr 19, 1999 at 02:43:38PM +0200
In reply to:homega@vlc.servicom.es
Quoting homega@vlc.servicom.es(homega@vlc.servicom.es):
> ~>
> ~> > by doing a make clean after make dep you are clean out all that you
> ~> > just did.
> ~> >
> ~> Actually, make mrproper is what cleans out everthing. make clean removes
> ~> object files and kernel images and such. Do an ls -a after make clean
> ~> sometime. You should still see .depend, .config, etc.
>
> So, I'm doing the right steps in the correct order:
> (as root)
> cd /usr/src
> rm linux
>
> tar zxvf linux-2.0.35.tar.gz
> or, in another case:
> tar Ixvf linux-2.0.35.tar.bz2
>
> mv linux linux-2.0.35
> or
> mv linux kernel-source-2.0.35
ln -s kernel-source-2.0.35 linux
>
ls -l should show you that linux -----> points to kernel-source-2.0.35
> cd \linux *** without the link (ln -s ) there isn't a linux
dir after you did the mv linux kernel-source-2.0.35
> make mrproper
> make config ***** menuconfig is clearer here IMO
> make dep
> make clean
> make zImage
> or
> make bzImage
>
> and that's it since I get the error (after a while) and the image is not
> generated at /usr/src/linux/arch/i386/boot/
>
> If it's of any help, I include the .config file generated by `make config'.
>
> Also, I have installed:
>
> bin86 0.13.0-4
> binutils 2.9.1-0.2
> libc6 2.0.7.19981211
> make 3.76.1-8
> ncurses3.4-dev 1.9.9g-8.8
> patch 2.5-2
>
> which, I believe, it's all I need to compile kernel 2.0.35 on a Debian 2.0
> machine... or?
>
> Thanks
>
> Horacio
> --
> Claves - GnuPG/PGP - Keys : http://www.rediris.es/cert/keyserver
> o/or
> Envía un mensaje vacío a homega@vlc.servicom.es con la línea de asunto:
> Send a blank message to homega@vlc.servicom.es with the subject line:
> Tipo de Clave/Key Type Asunto:/Subject:
>
> DSA/ElGamal fetch dsa/elgamal
> DSS/Diffie-Hellman fetch dh/dss
> RSA fetch rsa
> #
> # Automatically generated make config: don't edit
> #
>
> #
> # Code maturity level options
> #
> # CONFIG_EXPERIMENTAL is not set
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODVERSIONS=y
> # CONFIG_KERNELD is not set
>
> #
> # General setup
> #
> # CONFIG_MATH_EMULATION is not set
> CONFIG_NET=y
> # CONFIG_MAX_16M is not set
> CONFIG_PCI=y
> CONFIG_SYSVIPC=y
> CONFIG_BINFMT_AOUT=y
> CONFIG_BINFMT_ELF=y
> CONFIG_KERNEL_ELF=y
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> CONFIG_M586=y
> # CONFIG_M686 is not set
>
> #
> # Floppy, IDE, and other block devices
> #
> CONFIG_BLK_DEV_FD=y
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDECD=y
> CONFIG_BLK_DEV_IDETAPE=y
> CONFIG_BLK_DEV_IDEFLOPPY=y
> # CONFIG_BLK_DEV_IDESCSI is not set
> # CONFIG_BLK_DEV_IDE_PCMCIA is not set
> # CONFIG_BLK_DEV_CMD640 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> # CONFIG_BLK_DEV_TRITON is not set
> CONFIG_IDE_CHIPSETS=y
>
> #
> # Note: most of these also require special kernel boot parameters
> #
> # CONFIG_BLK_DEV_ALI14XX is not set
> # CONFIG_BLK_DEV_DTC2278 is not set
> # CONFIG_BLK_DEV_HT6560B is not set
> # CONFIG_BLK_DEV_QD6580 is not set
> # CONFIG_BLK_DEV_UMC8672 is not set
>
> #
> # Additional Block Devices
> #
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_MD is not set
> CONFIG_BLK_DEV_RAM=m
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # Networking options
> #
> # CONFIG_FIREWALL is not set
> # CONFIG_NET_ALIAS is not set
> CONFIG_INET=y
> # CONFIG_IP_FORWARD is not set
> # CONFIG_IP_MULTICAST is not set
> CONFIG_SYN_COOKIES=y
> # CONFIG_IP_ACCT is not set
> # CONFIG_IP_ROUTER is not set
> # CONFIG_NET_IPIP is not set
>
> #
> # (it is safe to leave these untouched)
> #
> # CONFIG_INET_PCTCP is not set
> # CONFIG_INET_RARP is not set
> # CONFIG_NO_PATH_MTU_DISCOVERY is not set
> CONFIG_IP_NOSR=y
> CONFIG_SKB_LARGE=y
>
> #
> #
> #
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_AX25 is not set
> # CONFIG_NETLINK is not set
>
> #
> # SCSI support
> #
> # CONFIG_SCSI is not set
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> CONFIG_DUMMY=y
> # CONFIG_EQUALIZER is not set
> # CONFIG_PLIP is not set
> CONFIG_PPP=m
>
> #
> # CCP compressors for PPP are only built as modules.
> #
> CONFIG_SLIP=y
> # CONFIG_SLIP_COMPRESSED is not set
> CONFIG_SLIP_SMART=y
> # CONFIG_SLIP_MODE_SLIP6 is not set
> # CONFIG_NET_RADIO is not set
> # CONFIG_NET_ETHERNET is not set
> # CONFIG_TR is not set
> # CONFIG_FDDI is not set
> # CONFIG_ARCNET is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
>
> #
> # CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
> #
> # CONFIG_CD_NO_IDESCSI is not set
>
> #
> # Filesystems
> #
> CONFIG_QUOTA=y
> CONFIG_MINIX_FS=y
> # CONFIG_EXT_FS is not set
> CONFIG_EXT2_FS=y
> # CONFIG_XIA_FS is not set
> CONFIG_NLS=y
> CONFIG_ISO9660_FS=y
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> # CONFIG_UMSDOS_FS is not set
> CONFIG_VFAT_FS=y
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> CONFIG_NLS_CODEPAGE_850=y
> CONFIG_NLS_CODEPAGE_852=y
> CONFIG_NLS_CODEPAGE_855=y
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> CONFIG_NLS_CODEPAGE_865=y
> # CONFIG_NLS_CODEPAGE_866 is not set
> CONFIG_NLS_CODEPAGE_869=y
> # CONFIG_NLS_CODEPAGE_874 is not set
> CONFIG_NLS_ISO8859_1=y
> CONFIG_NLS_ISO8859_2=m
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> CONFIG_NLS_ISO8859_5=m
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_KOI8_R is not set
> CONFIG_PROC_FS=y
> CONFIG_NFS_FS=m
> CONFIG_SMB_FS=y
> # CONFIG_SMB_WIN95 is not set
> # CONFIG_HPFS_FS is not set
> CONFIG_SYSV_FS=m
> CONFIG_UFS_FS=m
> # CONFIG_BSD_DISKLABEL is not set
> CONFIG_SMD_DISKLABEL=y
>
> #
> # Character devices
> #
> CONFIG_SERIAL=y
> # CONFIG_DIGI is not set
> # CONFIG_CYCLADES is not set
> # CONFIG_STALDRV is not set
> # CONFIG_RISCOM8 is not set
> CONFIG_PRINTER=m
> # CONFIG_SPECIALIX is not set
> # CONFIG_MOUSE is not set
> # CONFIG_UMISC is not set
> # CONFIG_QIC02_TAPE is not set
> # CONFIG_FTAPE is not set
> CONFIG_APM=y
> # CONFIG_APM_IGNORE_USER_SUSPEND is not set
> CONFIG_APM_DO_ENABLE=y
> # CONFIG_APM_CPU_IDLE is not set
> # CONFIG_APM_DISPLAY_BLANK is not set
> CONFIG_APM_POWER_OFF=y
> # CONFIG_APM_IGNORE_MULTIPLE_SUSPEND is not set
> # CONFIG_WATCHDOG is not set
> CONFIG_RTC=y
>
> #
> # Sound
> #
> CONFIG_SOUND=y
> # CONFIG_LOWLEVEL_SOUND is not set
>
> #
> # Kernel hacking
> #
> # CONFIG_PROFILE is not set
--
USER, n.:
The word computer professionals use when they mean "idiot."
-- Dave Barry, "Claw Your Way to the Top"
_______________________________________________________
Wayne T. Topa <wtopa@ix.netcom.com>
Reply to: