[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: PCI Linksys card in Hamm



Vaidhy

Thanks for the reply.  Actual I should have specified my card more
specifically.  I have the Ether PCI II Lan card which Linksys says uses the
NE2000 driver.  I also failed to note that I HAVE successfully installed the
same card in Hamm with my previous configuration.

Sorry
Cristov


-----Original Message-----
From: Vaidhyanathan Mayilrangam [mailto:vaidhy@wwdg.com]
Sent: Wednesday, February 10, 1999 4:10 AM
To: cristov@earthling.net
Cc: debian-user@lists.debian.org
Subject: Re: PCI Linksys card in Hamm


Hi Cristov,

I am pretty sure that Linksys cards are based on Dec Tulip cards and not on
NE 2000. I am using Linksys Etherfast 10/100. You can either use the slink
system and select the tulip card or get the program from kernel 2.2 and
compile it in hamm. Both of them works.

For further info, please look at www.linksys.com. All their cards are based
on DEC tulip with/without PNIC. However, slink drivers take care of that.

Hope that helps,
Vaidhy

> From: "Cristov Russell" <wolfsong13@home.com>
> Hello all.
>
> I gave up on Hamm a few months ago but with Slink almost ready I thought
I'd
> give it another go.  I've since rebuilt my system and now have FIC 503+
> motherboard with an AMD 300mhz processor.
>
> I've run the setup DOZENS of times and pretty much had the install process
> down to a science.  Now I'm having a problem installing my PCI Linksys
NIC.
> It uses the NE2000 driver which requires the IO and IRQ parameters to be
> specified.  From Windoze I've verified the IRQ is 9 and the IO is 6C00.
> After entering the values (io=0x6C00 irq=9) the system hangs.  I'm not
> exactly sure what I'm doing wrong this time.  Any suggestions?
>
> BTW - I really don't intend to use Hamm I simply wanted to test my new
> configuration and get back into the swing of things in anticipation of
> Slink.  So it's not critically that I get things working but it would help
> me out quite a bit.  Hopefully I'll be able to compile a working kernel
with
> Slink (I won't even count the number of failed Hamm attempts).
>
> Best wishes and thanks in advance.
>
> Cristov Russell
> cristov@earthling.net
>
>
> --
> Unsubscribe?  mail -s unsubscribe debian-user-request@lists.debian.org <
/dev/null
>
*--------------------------------------------*
Alike for those who for Today prepare
And those that after a Tomorrow stare;
A Muezzin from Tower of Darkness cries,
"Fools, your reward is nether here nor there".
                          - Omar Khayyam
*--------------------------------------------*


Reply to: