PCI Linksys card in Hamm
>>>>
It uses the NE2000 driver which requires the IO and IRQ parameters to be
specified. From Windoze I've verified the IRQ is 9 and the IO is 6C00.
After entering the values (io=0x6C00 irq=9) the system hangs. I'm not
exactly sure what I'm doing wrong this time. Any suggestions?
-----------------------------------------------------
I am using a ne2000 pci card in my system at home. It uses one of
those real-tek chips. Anyway I think you need the ne2000-pci driver.
In my case the driver can either probe the card for the io and irq, or
it is getting it from the bios. I did not have to provide any
parameters, and the card works fine. I have it installed as a module.
You might have to play with the plug and play settings on your bios
(if any, I had to turn this on and off before it worked the first time
to avoid irq conflicts with other cards).
==
Amateur Radio, when all else fails!
http://www.qsl.net/wa2mze
Debian Gnu Linux, Live Free or .....
_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
Reply to: