[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Interesting Problem (PCMCIA ethernet and modem)


you shouldn't use /etc/init.d/network with the PCMCIA package but
/etc/pcmcia/network.opts. I think you are getting routing problem that is the
packages are sent to the wrong interface: what does route -n say?


On Tue, Dec 01, 1998 at 08:30:58PM +0200, Daniel Mashao wrote:
> After some struggles I was able to install a PCMCIA ethernet card. It is
> working wonderfully. Unfortunately intslling it affected my modem card.
> Now when I dial using the modem it makes a connection but I can no longer
> telnet of ping outside. I changed my /etc/init.d/networks file to the old
> one without eth0 but it did not help. Any ideas?
> /------------------------------------------------------------------------------/
> Daniel J. Mashao	      	
> Electrical Engineering                          daniel@comgate.ee.uct.ac.za
> University of Cape Town	       	            http://www.ee.uct.ac.za/~daniel 
> Rondebosch, 7700, S. Africa         (w) 27+21+650 2816  (h) 27+21+705 8469
> /------------------------------------------------------------------------------/

Molti si ostinano sulla strada intrapresa, pochi sulla meta.
						-- Nietzsche

Reply to: