[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Setting up network on Hamm install



In article <[🔎] 87k99gnd9n.fsf@pfaffben.user.msu.edu>, Ben Pfaff
<pfaffben@pilot.msu.edu> writes
>   The Bo install notes say I need to know the following. I assume Hamm
>   will need it too. I have a LAN with Linux (none yet installed) and
>   Win'95 boxes on and will also want to connect to the 'net.
>
>Since you are on two networks (LAN + Internet), your choices will
>depend on whether you have two Ethernet cards in the machine.  If you

I do.

>do have two--one hooked into the LAN, one to the Internet--then you
>configure the LAN card with your LAN IP address, and the Internet card
>with your Internet IP address.  In this case, just make sure that
>you're consistent when you answer the prompts--use either the data
>from the LAN or the Internet, but not a combination.

So what do I put for my domain name for my LAN?

Thanks
Ian
-- 
Ian Lynagh - ian@lynagh.demon.co.uk
http://home.sn.no/~balchen/igloo/

How does the guy who drives the snowplow get to work in the mornings?


--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org


Reply to: