Re: Distributed Kernel options
Hi,
>>"Kenneth" == Kenneth L Summers <summers@ARC.unm.EDU> writes:
>> Hi,
>>
>> I think you need the config file from a distribution kernel. On
>> recent kernel, this is in /boot/config-<version>. You can use dpkg
>> -x kernel-image*.deb /tmp to extract the default kernel to /tmp;
>> look then in /tmp/boot for the config file; use kernel-package to
>> rebuild the kernel. (look at the docs for kernel-package)
>>
>> Is that coherent?
Kenneth> Coherent? Yes. Did it work for me? Well... no. I did as
Kenneth> you suggested, and downloaded the .deb file for the image I'm
Kenneth> using (2.0.29). Unfortunately there is no configuration info
Kenneth> anywhere in the extracted file. In the boot directory is a
Kenneth> vmlinuz, a vmlinux, and a System.map. That's it. As far as
Kenneth> I can tell there are no configuration files anywhere else.
I should have stressed `recent kernels'. 2.0.29 is kinda old;
this option was only put into the kernel-package recently. The
following is what is used in kernel-image-2.0.32_2.0.32-5.deb on the
i386 platforms.
I hope this helps.
manoj
--
"Failing to get them to do it your way might mean they're stupid, but
it also means you failed to get them to do it your way." Cal Keegan
Manoj Srivastava <srivasta@acm.org> <http://www.datasync.com/%7Esrivasta/>
Key C7261095 fingerprint = CB D9 F4 12 68 07 E4 05 CC 2D 27 12 1D F5 E8 6E
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KERNELD=y
#
# General setup
#
CONFIG_MATH_EMULATION=y
CONFIG_NET=y
# CONFIG_MAX_16M is not set
CONFIG_PCI=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_MCA=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_JAVA=m
CONFIG_KERNEL_ELF=y
CONFIG_M386=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M686 is not set
CONFIG_BIGPHYS_AREA=y
#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_IDE_PCMCIA=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_TRITON=y
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_PS2=y
#
# Additional Block Devices
#
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_STRIPED=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_DEV_XD=m
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
CONFIG_FIREWALL=y
CONFIG_NET_ALIAS=y
CONFIG_INET=y
CONFIG_IP_FORWARD=y
# CONFIG_IP_MULTICAST is not set
CONFIG_SYN_COOKIES=y
CONFIG_RST_COOKIES=y
CONFIG_IP_FIREWALL=y
# CONFIG_IP_FIREWALL_VERBOSE is not set
# CONFIG_IP_MASQUERADE is not set
# CONFIG_IP_TRANSPARENT_PROXY is not set
# CONFIG_IP_ALWAYS_DEFRAG is not set
# CONFIG_IP_ACCT is not set
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=m
CONFIG_IP_ALIAS=m
# CONFIG_ARPD is not set
#
# (it is safe to leave these untouched)
#
# CONFIG_INET_PCTCP is not set
CONFIG_INET_RARP=m
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
CONFIG_IP_NOSR=y
# CONFIG_SKB_LARGE is not set
#
#
#
CONFIG_IPX=m
CONFIG_ATALK=m
# CONFIG_AX25 is not set
# CONFIG_BRIDGE is not set
CONFIG_NETLINK=y
# CONFIG_RTNETLINK is not set
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
#
# SCSI low-level drivers
#
CONFIG_SCSI_7000FASST=y
CONFIG_SCSI_AHA152X=y
CONFIG_SCSI_AHA1542=y
CONFIG_SCSI_AHA1740=y
CONFIG_SCSI_AIC7XXX=y
# CONFIG_AIC7XXX_TAGGED_QUEUEING is not set
# CONFIG_OVERRIDE_CMDS is not set
# CONFIG_AIC7XXX_PAGE_ENABLE is not set
CONFIG_AIC7XXX_PROC_STATS=y
CONFIG_AIC7XXX_RESET_DELAY=15
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_IN2000=y
CONFIG_SCSI_AM53C974=y
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DTC3280=y
CONFIG_SCSI_EATA_DMA=y
CONFIG_SCSI_EATA_PIO=y
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GENERIC_NCR5380=m
# CONFIG_SCSI_GENERIC_NCR53C400 is not set
CONFIG_SCSI_G_NCR5380_PORT=y
# CONFIG_SCSI_G_NCR5380_MEM is not set
CONFIG_SCSI_NCR53C406A=m
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_NCR53C8XX=y
CONFIG_SCSI_NCR53C8XX_NVRAM_DETECT=y
# CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=4
CONFIG_SCSI_NCR53C8XX_SYNC=5
# CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
CONFIG_SCSI_IBMMCA=y
CONFIG_SCSI_PPA=y
CONFIG_SCSI_PAS16=y
CONFIG_SCSI_QLOGIC_FAS=y
CONFIG_SCSI_QLOGIC_ISP=y
CONFIG_SCSI_SEAGATE=y
CONFIG_SCSI_T128=y
CONFIG_SCSI_U14_34F=y
# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=y
CONFIG_SCSI_GDTH=y
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_PLIP=m
CONFIG_PPP=m
#
# CCP compressors for PPP are only built as modules.
#
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_RADIO=y
CONFIG_BAYCOM=m
CONFIG_STRIP=m
CONFIG_WAVELAN=m
CONFIG_WIC=m
CONFIG_SCC=m
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_VORTEX=m
CONFIG_LANCE=y
CONFIG_LANCE32=y
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_ULTRA32=m
CONFIG_SMC9194=m
CONFIG_NET_ISA=y
CONFIG_AT1700=m
CONFIG_E2100=m
CONFIG_DEPCA=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_FMV18X=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_HP100=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_NI52=m
CONFIG_NI65=m
# CONFIG_SEEQ8005 is not set
# CONFIG_SK_G16 is not set
CONFIG_NET_MCA=y
CONFIG_ELMC=m
CONFIG_ULTRA_MCA=m
# CONFIG_NE2000_MCA is not set
CONFIG_NET_EISA=y
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_EEXPRESS_PRO100B=m
CONFIG_DE4X5=m
CONFIG_DEC_ELCP=m
CONFIG_DGRS=m
# CONFIG_ZNET is not set
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_ARCNET=m
CONFIG_ARCNET_ETH=y
CONFIG_ARCNET_1051=y
#
# ISDN subsystem
#
CONFIG_ISDN=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_HISAX=m
CONFIG_HISAX_EURO=y
# CONFIG_HISAX_1TR6 is not set
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_ELSA_PCC=y
# CONFIG_HISAX_ELSA_PCMCIA is not set
CONFIG_HISAX_IX1MICROR2=y
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_AVMB1=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
CONFIG_CD_NO_IDESCSI=y
CONFIG_AZTCD=m
CONFIG_GSCD=m
CONFIG_SBPCD=m
CONFIG_MCD=m
CONFIG_MCDX=m
CONFIG_OPTCD=m
CONFIG_CM206=m
CONFIG_SJCD=m
CONFIG_CDI_INIT=y
CONFIG_ISP16_CDI=m
CONFIG_CDU31A=m
CONFIG_CDU535=m
#
# Filesystems
#
CONFIG_QUOTA=y
CONFIG_MINIX_FS=y
CONFIG_EXT_FS=m
CONFIG_EXT2_FS=y
CONFIG_XIA_FS=m
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
CONFIG_UMSDOS_FS=m
CONFIG_PROC_FS=y
CONFIG_NFS_FS=m
CONFIG_SMB_FS=m
CONFIG_SMB_WIN95=y
CONFIG_NCP_FS=m
CONFIG_ISO9660_FS=y
CONFIG_HPFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_AUTOFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_AMIGA_PARTITION=y
CONFIG_UFS_FS=m
CONFIG_BSD_DISKLABEL=y
CONFIG_SMD_DISKLABEL=y
#
# Character devices
#
CONFIG_SERIAL=m
# CONFIG_DIGI is not set
CONFIG_CYCLADES=m
# CONFIG_STALDRV is not set
CONFIG_RISCOM8=m
CONFIG_PRINTER=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_MOUSE=y
CONFIG_ATIXL_BUSMOUSE=m
CONFIG_BUSMOUSE=m
CONFIG_MS_BUSMOUSE=m
CONFIG_PSMOUSE=m
CONFIG_82C710_MOUSE=y
CONFIG_UMISC=y
CONFIG_QIC02_TAPE=y
CONFIG_QIC02_DYNCONF=y
#
# Setting runtime QIC-02 configuration is done with qic02conf
#
#
# from the tpqic02-support package. It is available at
#
#
# ftp://titus.cfw.com/pub/Linux/util/
#
CONFIG_FTAPE=m
#
# Set IObase/IRQ/DMA for ftape in ./drivers/char/ftape/Makefile
#
# CONFIG_APM is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WDT=m
CONFIG_WDT_501=y
# CONFIG_WDT_501_FAN is not set
CONFIG_SOFT_WATCHDOG=m
CONFIG_PCWATCHDOG=m
CONFIG_RTC=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# Kernel hacking
#
# CONFIG_PROFILE is not set
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: