Please help. I can't get my modem to work under linux, but it works
fine in NT. The settings in NT are:
IRQ 3 and IO 0x2e8 (COM4) .
When booting linux, it sees my serial ports at :
/dev/tty00 at 0x03f8 (irq = 4) is a 16550A
/dev/tty03 at 0x02e8 (irq = 3) is a 16550A
and after /rc.boot/0setserial is run they are configured to :
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS3 at 0x02e8 (irq = 3) is a 16550A
Seems ok to me, but I cannot dial out from port /dev/ttyS3. The group
on /dev/ttyS3 is dialout.
When I checked /proc/interrupts , there is no assignment for IRQ 3 . I
have no idea what to do next .
thanks in advance...
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
Trouble? e-mail to email@example.com .