Re: Problem with a new Mach64 3D Xpression 2MB
Dirk Eddelbuettel wrote:
>
> I am trying to set up a new machine for someone else. The machine came with
> an ATI 3D Xpression 2MB card.
>
> Using Debian 1.3.1, I can't get any X11 server other than vga16 to work. The
> Mach64 server seems to splits the screen vertically a couple of times. X
> -probeonly says
>
> unknown ATI (82304x) rev 154, Aperture @ 0xe000000, Block I/0 @ 0x6100
> Memory type: 3
> Clock type: Internal
> Ramdac is Internal
>
> I would be grateful if anyone could help me out. Please email me directly as
> I am not following this list very regularly.
>
> Thanks, Dirk
>
> --
> edd@rosebud.ml.org According to the latest official figures,
> http://rosebud.ml.org/~edd 43% of all statistics are totally worthless.
>
I'm using a 2MB ATI with the Mach64 server. Here's my
XF86Config if it helps:
----------------------[ cut here ]----------------------
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/sharefont/"
EndSection
# Section "Module"
#
# This loads the module for the Joystick driver
#
# Load "xf86Jstk.so"
#
# EndSection
Section "ServerFlags"
EndSection
Section "Keyboard"
Protocol "Standard"
AutoRepeat 500 5
LeftAlt Meta
RightAlt ModeShift
XkbDisable
XkbKeymap "xfree86(us)"
EndSection
Section "Pointer"
Protocol "PS/2"
Device "/dev/mouse"
Emulate3Buttons
Emulate3Timeout 50
EndSection
Section "Monitor"
Identifier "My Monitor"
VendorName "AST"
ModelName "RMO7F11"
HorizSync 30-68
VertRefresh 50-90
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491
493 525
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601
605 628 +hsync +vsync
Modeline "1024x768" 65 1024 1064 1208 1344 768
791 797 806 -hsync -vsync
Modeline "1024x767" 65.00 1024 1056 1200 1344 767
791 797 806 -hsync -vsync
# 1280x1024 @ 60 Hz, 63.51 kHz hsync
Modeline "1280x1024" 110.00 1280 1328 1512 1732 1024
1025 1028 1058
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204
205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245
246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244
246 262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301
602 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301
303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319
322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301
302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301
303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301
303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319
322 333 Doublescan
EndSection
Section "Device"
Identifier "ATI Mach64"
VendorName "Unknown"
BoardName "Unknown"
#VideoRam 1024
# Insert Clocks lines here if appropriate
Option "power_saver"
EndSection
Section "Screen"
Driver "accel"
Device "ATI Mach64"
Monitor "My Monitor"
Subsection "Display"
Depth 8
# Modes "1280x1024" "1024x768" "800x600"
"640x480"
# Modes "1024x768" "800x600" "640x480"
Modes "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x767" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "640x400"
ViewPort 0 0
EndSubsection
EndSection
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble? e-mail to templin@bucknell.edu .
Reply to: