AWE64 Setup Solution...
To those trying to get their AWE64 working:
1) Since the 64 is pnp, the card must be initiallized before the
kernel tries to initialize the driver. This means you must use
something like isapnp to initialize the card and you must build the
sound driver as a _module_ so that you can initialize the card BEFORE
loading the driver
2) The dump from isapnp does not fully detect everything you need in
you isapnp.conf file. Try modifying my config file. Most important
is the IO 1 and IO 2 lines at the end. They are not detected by
pnpdump. This will allow the kernel to detect the AWE
------------------------------
# $Id: pnpdump.c,v 1.1.1.1 1997/09/14 15:27:30 fred Exp $
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of this file format, see isapnp.conf(5)
#
# For latest information on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags:
#
# Trying port address 0203
# Board 1 has serial identifier 62 11 36 59 a4 c3 00 8c 0e
#(DEBUG)
(VERIFYLD N)
(READPORT 0x0203)
(ISOLATE)
#(IDENTIFY *)
# Card 1: (serial identifier 62 11 36 59 a4 c3 00 8c 0e)
# CTL00c3 Serial No 288774564 [checksum 62]
# Version 1.0, Vendor version 1.0
# ANSI string -->Creative SB AWE64 PnP<--
# Vendor defined tag: 73 02 45 00
#
(CONFIGURE CTL00c3/288774564 (LD 0
# ANSI string -->Audio<--
(INT 0 (IRQ 9 (MODE +E)))
(DMA 0 (CHANNEL 1))
(DMA 1 (CHANNEL 5))
(IO 0 (BASE 0x0220))
(IO 1 (BASE 0x0330))
(IO 2 (BASE 0x0388))
(ACT Y)
))
(CONFIGURE CTL00c3/288774564 (LD 1
# Compatible device id PNPb02f
# ANSI string -->Game<--
(IO 0 (BASE 0x0200))
(ACT Y)
))
(CONFIGURE CTL00c3/288774564 (LD 2
# ANSI string -->WaveTable<--
(IO 0 (BASE 0x0620))
(IO 1 (BASE 0x0A20))
(IO 2 (BASE 0x0E20))
(ACT Y)
))
(WAITFORKEY)
------------------------------
--
Graduate Student edwalter@iname.com
Department of Chemistry walter@chem.wisc.edu
Univ of Wisconsin-Madison edwalter@students.wisc.edu
<PGP Public Key: finger walter@fozzie.chem.wisc.edu>
New Opcode #8: IPX - Increase Power and eXplode
-- tagline 1.00 by xopy
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble? e-mail to templin@bucknell.edu .
Reply to: