Re: AWE64 Setup Solution... THANKYOU!!!
On 28 Nov 1997, Erv Walter wrote:
THANKYOU!!!!!
I've been banging my head against the wall trying to get my AWE64
recognized by the sound driver. Number 2 in your note below got my AWE64
working.!!!! I did try adding two lines similar to what you had, but
mistakenly called them IO 0 instead of IO 1 and IO 2. Your example showed
me my error.
Best regards,
Nick
> To those trying to get their AWE64 working:
>
> 1) Since the 64 is pnp, the card must be initiallized before the
> kernel tries to initialize the driver. This means you must use
> something like isapnp to initialize the card and you must build the
> sound driver as a _module_ so that you can initialize the card BEFORE
> loading the driver
>
> 2) The dump from isapnp does not fully detect everything you need in
> you isapnp.conf file. Try modifying my config file. Most important
> is the IO 1 and IO 2 lines at the end. They are not detected by
> pnpdump. This will allow the kernel to detect the AWE
>
> ------------------------------
> # $Id: pnpdump.c,v 1.1.1.1 1997/09/14 15:27:30 fred Exp $
> # This is free software, see the sources for details.
> # This software has NO WARRANTY, use at your OWN RISK
> #
> # For details of this file format, see isapnp.conf(5)
> #
> # For latest information on isapnp and pnpdump see:
> # http://www.roestock.demon.co.uk/isapnptools/
> #
> # Compiler flags:
> #
> # Trying port address 0203
> # Board 1 has serial identifier 62 11 36 59 a4 c3 00 8c 0e
>
> #(DEBUG)
> (VERIFYLD N)
> (READPORT 0x0203)
> (ISOLATE)
> #(IDENTIFY *)
>
> # Card 1: (serial identifier 62 11 36 59 a4 c3 00 8c 0e)
> # CTL00c3 Serial No 288774564 [checksum 62]
> # Version 1.0, Vendor version 1.0
> # ANSI string -->Creative SB AWE64 PnP<--
> # Vendor defined tag: 73 02 45 00
> #
>
> (CONFIGURE CTL00c3/288774564 (LD 0
> # ANSI string -->Audio<--
> (INT 0 (IRQ 9 (MODE +E)))
> (DMA 0 (CHANNEL 1))
> (DMA 1 (CHANNEL 5))
> (IO 0 (BASE 0x0220))
> (IO 1 (BASE 0x0330))
> (IO 2 (BASE 0x0388))
> (ACT Y)
> ))
>
> (CONFIGURE CTL00c3/288774564 (LD 1
> # Compatible device id PNPb02f
> # ANSI string -->Game<--
> (IO 0 (BASE 0x0200))
> (ACT Y)
> ))
>
> (CONFIGURE CTL00c3/288774564 (LD 2
> # ANSI string -->WaveTable<--
> (IO 0 (BASE 0x0620))
> (IO 1 (BASE 0x0A20))
> (IO 2 (BASE 0x0E20))
> (ACT Y)
> ))
>
> (WAITFORKEY)
>
> ------------------------------
--------------------------------------------------------------------------
Nick Busigin <Sent from my Debian/GNU Linux Machine> nick@xwing.org
To obtain my pgp public key, email me with the subject: "get pgp-key"
--------------------------------------------------------------------------
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble? e-mail to templin@bucknell.edu .
Reply to: