kernel 2.0.30 (boot problem)

[omill@ewu.edu]

Please, help me with clarifying a boot problem. 
	I have upgraded from Debian 1.2.17 to Debian 1.3.1, and the machine
will not boot. I have recompiled the kernel 2.0.30 and rebooted the machine
again. Now it hangs, but then finally boots.
	This is dmesg with a troubled hda disk access:

Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fb660
pcibios_init : BIOS32 Service Directory entry at 0xfbb40
pcibios_init : PCI BIOS revision 2.10 entry at 0xfbb70
Probing PCI hardware.
Calibrating delay loop.. ok - 66.36 BogoMIPS
Memory: 14908k/16384k available (600k kernel code, 384k reserved, 492k 
data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.30 (root@tanenbaum) (gcc version 2.7.2.1) #1 Fri Sep 12 
	11:19:28 MDT 1997
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
hda: Maxtor 71626 AP, 1554MB w/128kB Cache, LBA, CHS=789/64/63
hdb: TOSHIBA CD-ROM XM-5602B, ATAPI CDROM driveide0 at 
	0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
Started kswapd v 1.4.2.2
FDC 0 is a post-1991 82077
Partition check:
	 hda: hda1 hda2
VFS: Mounted root (ext2 filesystem) readonly.
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=2977219, sector=2771587end_request: I/O 
error, dev 03:02, sector 2771587
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=2977219, sector=2771587end_request: I/O 
error, dev 03:02, sector 2771587
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=2977219, sector=2771587end_request: I/O 
error, dev 03:02, sector 2771587
____________________________
	P.S. I tried to boot an old kernel 2.0.27 it was giving me error
messages during a boot : "Unable to handle kernel paging request at virtual
address c181e595.." 
	What is wrong?
Any ideas will be appreciated.	
___________________________________________________________________________
Olga Mill                                                    	
omill@ewu.edu
Eastern Washington University                                                               
	
__________________________________________________________________________



--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org . Trouble? 
e-mail to templin@bucknell.edu .