help!!!!

[Valenzuela Family <eav@pacbell.net>]

 I have a 386 laptop that i just installed linux on and I don't know how
to print from it and how to automatically mount a floppy.  Here is my
booth message if anyone can help me.
Thank you,
Ernesto

Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pci_init: no BIOS32 detected
Calibrating delay loop.. ok - 4.11 BogoMIPS
Memory: 6472k/8384k available (968k kernel code, 384k reserved, 560k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
Checking 'hlt' instruction... Ok.
Linux version 2.0.27 (root@os) (gcc version 2.7.2.1) #1 Fri Jan 10 23:46:22 MET 1997
Real Time Clock Driver v1.07
tpqic02: Runtime config, $Revision: 0.4.1.5 $, $Date: 1994/10/29 02:46:13 $
tpqic02: DMA buffers: 20 blocks, at address 0x242e00 (0x242cb0)
Ramdisk driver initialized : 16 ramdisks of 4096K size
hda: Conner Peripherals 84MB - CP2084, 81MB w/32kB Cache, CHS=548/8/38
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
Started kswapd v 1.4.2.2 
FDC 0 is an 8272A
md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8
NCR53c406a: no available ports found
qlogicisp : PCI bios not present
eata_dma: No BIOS32 extensions present. This driver release still depends on it.
	  Skipping scan for PCI HBAs. 
eata_pio: No BIOS32 extensions present. This driver release still depends on it.
          Skipping scan for PCI HBAs.
Failed initialization of WD-7000 SCSI card!
PPA: unable to initialise controller at 0x378, error 2
scsi : 0 hosts.
scsi : detected total.
Ethernet Bridge 002 for NET3.035 (Linux 2.0)
Partition check:
 hda: hda1 hda2 < hda5 >
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 17304k swap-space
linear personality registered
JAVA Binary support v1.01 for Linux 1.3.98 (C)1996 Brian A. Lantz
lp1 at 0x0378, (polling)
PS/2 auxiliary pointing device detected -- driver installed.
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16450
tty01 at 0x02f8 (irq = 3) is a 16450
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.2.0 (dynamic channel allocation)
PPP Dynamic channel allocation code copyright 1995 Caldera, Inc.
PPP line discipline registered.
SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256).
Mem-info:
Free pages:        1052kB
 ( 29*4kB 29*8kB 16*16kB 4*32kB 3*64kB 1*128kB = 1052kB)
Swap cache: add 0/0, delete 169469/0, find 0/0
Free swap:        17304kB
2096 pages of RAM
263 free pages
478 reserved pages
1013 pages shared
Buffer memory:      292kB
Buffer heads:       360
Buffer blocks:      292
Buffer[0] mem: 152 buffers, 8 used (last=17), 0 locked, 0 protected, 0 dirty 0 shrd
Buffer[2] mem: 82 buffers, 10 used (last=70), 3 locked, 0 protected, 0 dirty 0 shrd
Size    [LAV]     Free  Clean  Unshar     Lck    Lck1   Dirty  Shared 
  512 [    0]:       0       0       0       0       0       0       0 
 1024 [    2]:      58     152       0      82       0       0       0 
 2048 [    0]:       0       0       0       0       0       0       0 
 4096 [    0]:       0       0       0       0       0       0       0 
 8192 [    0]:       0       0       0       0       0       0       0 
Networking buffers in use          : 0
Network buffers locked by drivers  : 0
Total network buffer allocations   : 61
Total failed network buffer allocs : 0
Total free while locked events     : 0
IP fragment buffer size            : 0
VFS: Disk change detected on device 02:00
end_request: I/O error, dev 02:00, sector 0
VFS: Disk change detected on device 02:00
end_request: I/O error, dev 02:00, sector 0
VFS: Disk change detected on device 02:00