Selamlar,
Bir süredir Gnome 2.10 yüklemeyi düşünüyordum ve
sources.list e
deb http://archive.progeny.com/debian/ experimental main non-free
contrib
deb http://archive.progeny.com/debian/ unstable main non-free contrib
satırlarını ekleyip
apt-get install gnome -t experimental
ile Gnome 2.10 u sorunsuz olarak yüklemeyi başardım fakat sonrasında ses
duyamaz oldum. lsmod ve lspci çıktılarında snd modüllerinin gözükmesine
rağmen ses çıkışı alamıyorum.
lspci, lsmod, dmesg çıktılarım ekte var.
# cat syslog | grep snd
# cat syslog | grep ac97
# cat syslog | grep AC97
# cat syslog | grep oss
denediğimde herhangi bir çıktı almıyorum.
Olası sorun hakkında bir düşüncesi olan varmı acaba. Ya da sorunun
detayına ulaşmak için nerelere bakmalıyım.
Bir de daha önceden disk in ntfs parçalarını CD-ROM u mount ettiğimde
dektop a yerleşirdi. Şu anda sadece smb ile mount ettiklerim geliyor.
Bunun için bir ayar mı yapmam gerekiyor?
Herkese teşekkürler.
--
--
Leoman - leoman{at}leoman{dot}gen{dot}tr
Sys Adm. & Software Developer
Debian, it's an addiction
n(TM) XP 2200+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1799.0832 MHz.
..... host bus clock speed is 266.0641 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4220k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf1990, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f9dc0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9df0, dseg 0xf0000
pnp: 00:12: ioport range 0xe400-0xe47f has been reserved
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 1 0 1 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 C1
11 0DD 0D 1 0 0 0 0 0 2 38
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 001 01 1 1 0 1 0 1 1 A9
16 001 01 1 1 0 1 0 1 1 B1
17 001 01 1 1 0 1 0 1 1 B9
Using vector-based indexing
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ193 -> 0:16
IRQ169 -> 0:21
IRQ177 -> 0:22
IRQ185 -> 0:23
.................................... done.
Simple Boot Flag at 0x3a set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 9
PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 9
PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 9
PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4220 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:DMA
hda: ST380011A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
hdd: HL-DT-ST GCE-8526B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda6: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 669122
ext3_orphan_cleanup: deleting unreferenced inode 669120
ext3_orphan_cleanup: deleting unreferenced inode 635468
ext3_orphan_cleanup: deleting unreferenced inode 635640
ext3_orphan_cleanup: deleting unreferenced inode 424910
ext3_orphan_cleanup: deleting unreferenced inode 424902
ext3_orphan_cleanup: deleting unreferenced inode 424807
ext3_orphan_cleanup: deleting unreferenced inode 490921
ext3_orphan_cleanup: deleting unreferenced inode 146310
ext3_orphan_cleanup: deleting unreferenced inode 1056739
ext3_orphan_cleanup: deleting unreferenced inode 491160
ext3_orphan_cleanup: deleting unreferenced inode 497149
EXT3-fs: hda6: 12 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 955828k swap on /dev/hda7. Priority:-1 extents:1
EXT3 FS on hda6, internal journal
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
Capability LSM initialized
NTFS driver 2.1.15 [Flags: R/O MODULE].
NTFS-fs warning (device hda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS volume version 3.1.
NTFS-fs warning (device hda5): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS volume version 3.1.
irda_init()
NET: Registered protocol family 23
via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185
eth0: VIA Rhine II at 0xb400, 00:0e:a6:57:cd:d2, IRQ 185.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 169, io base 0000d800
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: irq 169, io base 0000d400
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: irq 169, io base 0000d000
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.3: irq 169, pci mem f0828000
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 2-2: new full speed USB device using address 2
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
hci_usb: Unknown symbol hci_free_dev
hci_usb: Unknown symbol hci_alloc_dev
hci_usb: Unknown symbol hci_unregister_dev
hci_usb: Unknown symbol hci_register_dev
hci_usb: Unknown symbol hci_free_dev
hci_usb: Unknown symbol hci_alloc_dev
hci_usb: Unknown symbol hci_unregister_dev
hci_usb: Unknown symbol hci_register_dev
Bluetooth: HCI USB driver ver 2.7
usbcore: registered new driver hci_usb
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: AGP aperture is 256M @ 0xe0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:11.5 to 64
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
inserting floppy driver for 2.6.8-2-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Real Time Clock Driver v1.12
input: PC Speaker
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
Unable to load NLS charset 857
smbfs: failed to load nls '857'
Unable to load NLS charset 857
smbfs: failed to load nls '857'
Unable to load NLS charset 857
smbfs: failed to load nls '857'
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02cc960(lo)
IPv6 over IPv4 tunneling driver
lp0: using parport0 (interrupt-driven).
Bluetooth: L2CAP ver 2.3
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7167 Fri Feb 25 09:08:22 PST 2005
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: XFree86 passes broken AGP3 flags (c). Fixed.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: XFree86 passes broken AGP3 flags (c). Fixed.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
eth0: no IPv6 routers present
smb_proc_readdir_long: error=-2, breaking
smb_proc_readdir_long: error=-2, breaking
smb_proc_readdir_long: error=-2, breaking
smb_proc_readdir_long: error=-2, breaking
smb_proc_readdir_long: error=-2, breaking
smb_proc_readdir_long: error=-2, breaking
smb_proc_readdir_long: error=-2, breaking
smb_proc_readdir_long: error=-2, breaking
smb_proc_readdir_long: error=-2, breaking
cdrom: hdd: mrw address space DMA selected
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
usb 4-2: new high speed USB device using address 3
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: ST325082 Model: 3AS Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 02
USB Mass Storage device found at 3
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: unknown partition table
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
VFS: Can't find ext3 filesystem on dev sda1.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 4-2: USB disconnect, address 3
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2)
Module Size Used by sd_mod 20480 0 usb_storage 59328 0 scsi_mod 115148 2 sd_mod,usb_storage nls_cp437 6016 0 isofs 33976 0 nvidia 3918140 12 rfcomm 34460 0 l2cap 23172 5 rfcomm lp 10408 0 ipv6 229892 10 smbfs 61048 4 pcspkr 3816 0 rtc 12088 0 analog 10784 0 floppy 54992 0 parport_pc 33348 1 parport 37320 2 lp,parport_pc snd_via82xx 26660 1 snd_ac97_codec 59268 1 snd_via82xx gameport 4736 2 analog,snd_via82xx snd_mpu401_uart 7296 1 snd_via82xx snd_rawmidi 23204 1 snd_mpu401_uart snd_seq_device 7944 1 snd_rawmidi pci_hotplug 30640 0 via_agp 8832 1 agpgart 31784 2 nvidia,via_agp hci_usb 12928 2 bluetooth 44036 7 rfcomm,l2cap,hci_usb ehci_hcd 27908 0 uhci_hcd 29328 0 usbcore 104164 6 usb_storage,hci_usb,ehci_hcd,uhci_hcd via_rhine 19848 0 mii 4864 1 via_rhine via_ircc 20368 0 irda 167360 1 via_ircc crc_ccitt 2432 1 irda nls_iso8859_9 4608 2 ntfs 88788 2 capability 4872 0 commoncap 7168 1 capability snd_pcm_oss 48168 1 tsdev 7168 0 snd_pcm 85384 2 snd_via82xx,snd_pcm_oss mousedev 9996 2 snd_page_alloc 11144 2 snd_via82xx,snd_pcm evdev 9088 0 snd_timer 23300 1 snd_pcm snd_mixer_oss 16640 1 snd_pcm_oss snd 50660 9 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss soundcore 9824 2 snd psmouse 17800 0 ide_cd 38176 0 cdrom 35740 1 ide_cd ext3 109672 1 jbd 54552 1 ext3 ide_generic 1664 0 via82cxxx 12956 1 ide_disk 16768 5 ide_core 125028 5 usb_storage,ide_cd,ide_generic,via82cxxx,ide_disk unix 26036 667 font 8576 0 vesafb 6688 0 cfbcopyarea 3840 1 vesafb cfbimgblt 3200 1 vesafb cfbfillrect 3712 1 vesafb
Attachment:
signature.asc
Description: This is a digitally signed message part