[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

USB2VGA dongle



Saludos.

Es la primera vez que escribo a la lista, normalmente trato de contestar a las dudas.
Pero ahora necesito de su ayuda.
Tengo el adaptador siguiente:

Bus 001 Device 006: ID 0711:5100 Magic Control Technology Corp. Magic Control Technology Corp. (USB2VGA dongle)

Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0711 Magic Control Technology Corp.
  idProduct          0x5100 Magic Control Technology Corp. (USB2VGA dongle)
  bcdDevice            0.01
  iManufacturer          16 MCT CORP
  iProduct               32 USBVGA
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration         48 Configuration
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface             64 Interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)


Ya valide y si esta soportado por el kernel.
Incluso con modprobe sisusbvga  ya esta cargado el modulo:

usb 1-1.1: new high-speed USB device number 6 using ehci-pci
usb 1-1.1: New USB device found, idVendor=0711, idProduct=5100
usb 1-1.1: New USB device strings: Mfr=16, Product=32, SerialNumber=0
usb 1-1.1: Product: USBVGA
usb 1-1.1: Manufacturer: MCT CORP
usbcore: registered new interface driver sisusb

Uso Debian GNU/Linux 7.4 (wheezy) 64-bit
Kernel: Linux Debian 3.11.0 #1 SMP PREEMPT Tue Sep 3 07:28:25 CDT 2013 x86_64
Pero no puedo hacerlo funcionar, sigo investigando por todos los medios, pero desde ayer no logro hacer que funcione este conector.
Espero puedan ayudarme, no tanto a darme la respuesta, pero tal vez a alguien se le ocurra una buena idea de como hacer funcionar este hardware.
Si necesitan algún log o dato adicional me dicen por favor .
Muchas gracias de antemano a todos.
Que tengan un excelente dia.
Atte.
RAUL MORA

Reply to: