[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Problemas al acceder a una carpeta de red





El 28 de febrero de 2013 13:02, Camaleón <noelamac@gmail.com> escribió:
El Thu, 28 Feb 2013 12:53:57 -0300, Hernan Montero escribió:

> El 28 de febrero de 2013 12:36, Camaleón <noelamac@gmail.com> escribió:

(...)

>> > Got a positive name query response from 10.8.0.21 ( 10.8.0.21 )
>> > Connecting to 10.8.0.21 at port 445
>> >  session request ok
>> > cli_session_setup: NT1 session setup failed:
>> > NT_STATUS_INVALID_PARAMETER session setup failed:
>> > NT_STATUS_INVALID_PARAMETER
>>
>> (...)
>>
>> Caray, ¿también falla en el mismo punto? :-?
>>
>> No lo entiendo, este no debería generar ningún error, se supone que es
>> el que funciona.
>>
>> Prueba estos puntos y manda el resultado:
>>
>> 1/ Ejecuta algo más básico:
>>
>> smbclient -d3 -L //10.8.0.21 -U usuario%contraseña

(...)

> Connecting to 10.8.0.21 at port 445
> cli_session_setup: NT1 session setup failed: NT_STATUS_INVALID_PARAMETER
> session setup failed: NT_STATUS_INVALID_PARAMETER

Nada, ni se inmuta.

>> 2/ He encontrado en Google una referencia al mensaje que recibes
>> ("session setup failed: NT_STATUS_INVALID_PARAMETER" y recomiendan
>> añadir en el archivo "/etc/samba/smb.conf" estas dos líneas:
>>
>> client NTLMv2 auth = no
>> client lanman auth = yes
>>
>>
> Añade estas opciones y vuelve a intentar la conexión con smbclient.
>>
> Añadí las opciones, pero no se en donde ubicarlas. Yo las ubique al
> final del smbclient, ¿Dificulta en algo?

Son opciones que deben ir dentro de la sección [global].

Pude acceder, me salio lo siguiente:
 
smbclient -d3 -L //10.8.0.21 -U usuario%contraseña                                
lp_load_ex: refreshing parameters                                                                                  
Initialising global parameters                                                                                     
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)                                          
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"                                        
Processing section "[global]"                                                                                      
added interface eth0 ip=fe80::1ec1:deff:fea8:45bf%eth0 bcast=fe80::ffff:ffff:ffff:ffff%eth0 netmask=ffff:ffff:ffff:ffff::
added interface wlan0 ip=fe80::72f3:95ff:feac:7bbc%wlan0 bcast=fe80::ffff:ffff:ffff:ffff%wlan0 netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=10.8.0.120 bcast=10.8.0.255 netmask=255.255.255.0
Client started (version 3.6.6).
Connecting to 10.8.0.21 at port 445
Domain=[DC4] OS=[Unix] Server=[Samba 3.5.6]


 
Gracias Camaleón, Ya pude acceder

 
Saludos,

--
Camaleón


--
To UNSUBSCRIBE, email to debian-user-spanish-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: [🔎] kgnv3f$gvc$6@ger.gmane.org" target="_blank">http://lists.debian.org/[🔎] kgnv3f$gvc$6@ger.gmane.org




--
                                    Saludos
                                                    **Hernan**

Reply to: