Re: servidor de acceso remoto casero!!
Leonel Hernández Grandela wrote:
Jorge A. Secreto wrote:
El día 21 de septiembre de 2009 17:00, Leonel Hernández Grandela
<maxpayne@filialfcm.ssp.sld.cu> escribió:
Juan Manuel Acuña Barrera wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
El 21/09/2009, a las 10:37 a.m., Leonel Hernández Grandela escribió:
haldrik wrote:
........
no manda errror simplemente cuando llamo desde un telefono o un cell
a ese
numero donde esta el modem y el linux debian lenny5 instalado con el
ppp+mgetty no recive la llamada el ppp aca les muestro el log del
mgetty ahi
a mi apreciacion parece que el detecta el modemj ya y no da error ...
09/21 11:54:44 yS0 mgetty: interim release 1.1.36-Jun15
09/21 11:54:44 yS0 check for lockfiles
09/21 11:54:44 yS0 checklock: stat failed, no file
09/21 11:54:44 yS0 locking the line
09/21 11:54:44 yS0 makelock(ttyS0) called
09/21 11:54:44 yS0 do_makelock: lock='/var/lock/LCK..ttyS0'
09/21 11:54:44 yS0 lock made
09/21 11:54:45 yS0 tio_get_rs232_lines: status: RTS CTS DSR DTR
09/21 11:54:45 yS0 lowering DTR to reset Modem
09/21 11:54:45 yS0 tss: set speed to 38400 (017)
09/21 11:54:45 yS0 tio_set_flow_control( HARD )
09/21 11:54:45 yS0 waiting for line to clear (VTIME=1), read:
09/21 11:54:46 yS0 send: \d\d\d+++\d\d\dAT&FS2=255[0d]
09/21 11:54:49 yS0 waiting for ``OK''
09/21 11:54:49 yS0 got:
09/21 11:55:09 yS0 timeout in chat script, waiting for `OK'
09/21 11:55:09 yS0 init chat timed out, trying force-init-chat
09/21 11:55:09 yS0 send: \d[10][03]\d\d\d+++\d\d\d[0d]\dATQ0V1H0[0d]
09/21 11:55:13 yS0 waiting for ``OK''
09/21 11:55:13 yS0 got:
09/21 11:55:33 yS0 timeout in chat script, waiting for `OK'
09/21 11:55:33 yS0 init chat failed, exiting...: Interrupted system
call
09/21 11:55:33 ##### failed in mg_init_data, dev=ttyS0, pid=21265
09/21 11:55:33 yS0 removing lock file
Lo que veo acá, que alguien me corrija si me equivoco, es que el modem
no contesta.
Estas seguro de que el modem está funcionando. Mandá una copia de lo
que tiren dmesg y lsmod.
Se me ocurre que tenés un winmodem y por eso no responde. ¿Es un modem
externo? ¿marca y modelo?
me yego por ekivocacion al privado reenvio a la lista...
--
Este mensaje le ha llegado mediante el servicio de correo electronico
que ofrece Infomed para respaldar el cumplimiento de las misiones del
Sistema Nacional de Salud. La persona que envia este correo asume el
compromiso de usar el servicio a tales fines y cumplir con las
regulaciones establecidas
Infomed: http://www.sld.cu/
dmseg esta GRANDISIMO ...
root@debian:~# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-19)
(dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian
4.1.2-25)) #1 SMP Wed Aug 19 06:06:52 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000007ef0000 (usable)
[ 0.000000] BIOS-e820: 0000000007ef0000 - 0000000007ef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000007ef3000 - 0000000007f00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 126MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 32496) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 32496
[ 0.000000] HighMem 32496 -> 32496
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 32496
[ 0.000000] On node 0 totalpages: 32496
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 222 pages used for memmap
[ 0.000000] Normal zone: 28178 pages, LIFO batch:7
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP 000F6F50, 0014 (r0 000000)
[ 0.000000] ACPI: RSDT 07EF3000, 0028 (r1 000000 AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: FACP 07EF3040, 0074 (r1 000000 AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: DSDT 07EF30C0, 2DC7 (r1 000000 AWRDACPI 1000
MSFT 100000C)
[ 0.000000] ACPI: FACS 07EF0000, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] Allocating PCI resources starting at 10000000 (gap:
07f00000:f7c00000)
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 32242
[ 0.000000] Kernel command line: root=/dev/hdb2 ro
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (0110c000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[ 0.000000] Detected 551.283 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 16384 (order: 4, 65536
bytes)
[ 0.004000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.004000] Memory: 118964k/129984k available (1770k kernel code,
10476k reserved, 751k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xc8800000 - 0xff7fe000 ( 879 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xc7ef0000 ( 126 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba9a9 - 0xc0376620 ( 751 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba9a9 (1770 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084611] Calibrating delay using timer specific routine.. 1104.33
BogoMIPS (lpj=2208675)
[ 0.084928] Security Framework initialized
[ 0.085030] SELinux: Disabled at boot.
[ 0.085112] Capability LSM initialized
[ 0.085249] Mount-cache hash table entries: 512
[ 0.086045] Initializing cgroup subsys ns
[ 0.086129] Initializing cgroup subsys cpuacct
[ 0.086204] Initializing cgroup subsys devices
[ 0.086357] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.086466] CPU: L2 cache: 256K
[ 0.086538] CPU serial number disabled.
[ 0.086613] Intel machine check architecture supported.
[ 0.086692] Intel machine check reporting enabled on CPU#0.
[ 0.086830] Checking 'hlt' instruction... OK.
[ 0.101294] SMP alternatives: switching to UP code
[ 0.117310] Freeing SMP alternatives: 16k freed
[ 0.117417] ACPI: Core revision 20080321
[ 0.129499] ACPI: setting ELCR to 0200 (from 1a20)
[ 0.136008] weird, boot CPU (#0) not listedby the BIOS.
[ 0.136008] SMP motherboard not detected.
[ 0.136008] Local APIC not detected. Using dummy APIC emulation.
[ 0.136008] SMP disabled
[ 0.136008] Brought up 1 CPUs
[ 0.136008] Total of 1 processors activated (1104.33 BogoMIPS).
[ 0.136008] CPU0 attaching sched-domain:
[ 0.136008] domain 0: span 0
[ 0.136008] groups: 0
[ 0.136463] net_namespace: 660 bytes
[ 0.136577] Booting paravirtualized kernel on bare hardware
[ 0.137929] NET: Registered protocol family 16
[ 0.139195] ACPI: bus type pci registered
[ 0.167468] PCI: PCI BIOS revision 2.10 entry at 0xfb100, last bus=1
[ 0.167565] PCI: Using configuration type 1 for base access
[ 0.167657] Setting up standard PCI resources
[ 0.174075] ACPI: EC: Look up EC in DSDT
[ 0.187898] ACPI: Interpreter enabled
[ 0.188024] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.188329] ACPI: Using PIC for interrupt routing
[ 0.206151] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.206788] pci 0000:00:1f.0: quirk: region 4000-407f claimed by ICH4
ACPI/GPIO/TCO
[ 0.206895] pci 0000:00:1f.0: quirk: region 4080-40bf claimed by ICH4
GPIO
[ 0.207583] PCI: Transparent bridge - 0000:00:1e.0
[ 0.207715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.208272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.213407] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 *12
14 15)
[ 0.214288] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.215129] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12
14 15) *9
[ 0.216062] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 0.217146] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.217360] pnp: PnP ACPI init
[ 0.217462] ACPI: bus type pnp registered
[ 0.233187] pnp: PnP ACPI: found 15 devices
[ 0.233297] ACPI: ACPI bus type pnp unregistered
[ 0.233382] PnPBIOS: Disabled by ACPI PNP
[ 0.234737] PCI: Using ACPI for IRQ routing
[ 0.235716] system 00:00: iomem range 0xca000-0xcffff has been reserved
[ 0.235807] system 00:00: iomem range 0xf0000-0xf7fff could not be
reserved
[ 0.235888] system 00:00: iomem range 0xf8000-0xfbfff could not be
reserved
[ 0.235969] system 00:00: iomem range 0xfc000-0xfffff could not be
reserved
[ 0.236102] system 00:00: iomem range 0x7ef0000-0x7efffff could not
be reserved
[ 0.236199] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.236278] system 00:00: iomem range 0x100000-0x7eeffff could not be
reserved
[ 0.236377] system 00:00: iomem range 0xffb00000-0xffb7ffff could not
be reserved
[ 0.236477] system 00:00: iomem range 0xfff00000-0xffffffff could not
be reserved
[ 0.236576] system 00:00: iomem range 0xe0000-0xeffff has been reserved
[ 0.236686] system 00:03: ioport range 0x290-0x297 has been reserved
[ 0.236767] system 00:03: ioport range 0x3f0-0x3f1 has been reserved
[ 0.236845] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.236924] system 00:03: ioport range 0x800-0x805 has been reserved
[ 0.268978] PCI: Bridge: 0000:00:1e.0
[ 0.269074] IO window: c000-cfff
[ 0.269152] MEM window: 0xd4000000-0xd5ffffff
[ 0.269226] PREFETCH window: 0x0000000010000000-0x00000000100fffff
[ 0.269332] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.269474] NET: Registered protocol family 2
[ 0.270016] IP route cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.271109] TCP established hash table entries: 4096 (order: 3, 32768
bytes)
[ 0.271458] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.271796] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.271876] TCP reno registered
[ 0.272344] NET: Registered protocol family 1
[ 0.272974] checking if image is initramfs...<7>Switched to high
resolution mode on CPU 0
[ 1.289562] it is
[ 2.603883] Freeing initrd memory: 6039k freed
[ 2.607336] audit: initializing netlink socket (disabled)
[ 2.607536] type=2000 audit(1253302012.604:1): initialized
[ 2.608352] Total HugeTLB memory allocated, 0
[ 2.608843] VFS: Disk quotas dquot_6.5.1
[ 2.609067] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.609371] msgmni has been set to 244
[ 2.610180] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 2.610291] io scheduler noop registered
[ 2.610359] io scheduler anticipatory registered
[ 2.610429] io scheduler deadline registered
[ 2.610546] io scheduler cfq registered (default)
[ 2.610685] pci 0000:00:01.0: Boot video device
[ 2.612396] isapnp: Scanning for PnP cards...
[ 2.967187] isapnp: No Plug & Play device found
[ 2.979572] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 2.980309] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.981082] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.982558] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.983103] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.990469] brd: module loaded
[ 2.991051] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.991134] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 2.992046] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.992882] mice: PS/2 mouse device common for all mice
[ 2.993533] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.993651] rtc0: alarms up to one month
[ 2.993886] cpuidle: using governor ladder
[ 2.993961] cpuidle: using governor menu
[ 2.994044] No iBFT detected.
[ 2.996319] TCP cubic registered
[ 2.996396] NET: Registered protocol family 17
[ 2.996492] Using IPI No-Shortcut mode
[ 2.997261] registered taskstats version 1
[ 2.997820] rtc_cmos 00:05: setting system clock to 2009-09-18
19:26:54 UTC (1253302014)
[ 3.000050] Freeing unused kernel memory: 244k freed
[ 3.021168] input: AT Translated Set 2 keyboard as /class/input/input0
[ 3.454195] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 3.454332] ACPI: Fan [FAN] (on)
[ 3.480013] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 3.480515] ACPI: ACPI0007:00 is registered as cooling_device1
[ 3.480604] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 3.491106] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 3.491726] ACPI: Thermal Zone [THRM] (55 C)
[ 5.348924] Uniform Multi-Platform E-IDE driver
[ 5.349053] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 5.573673] ICH: IDE controller (0x8086:0x2411 rev 0x02) at PCI slot
0000:00:1f.1
[ 5.573861] ICH: not 100% native mode: will probe irqs later
[ 5.573973] ide0: BM-DMA at 0xf000-0xf007
[ 5.574068] ide1: BM-DMA at 0xf008-0xf00f
[ 5.574149] Probing IDE interface ide0...
[ 5.587262] usbcore: registered new interface driver usbfs
[ 5.587460] usbcore: registered new interface driver hub
[ 5.587738] usbcore: registered new device driver usb
[ 5.692654] USB Universal Host Controller Interface driver v3.0
[ 6.084342] hdb: ST340014A, ATA DISK drive
[ 6.140431] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 6.140826] hdb: UDMA/66 mode selected
[ 6.141180] Probing IDE interface ide1...
[ 6.399529] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 6.407619] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 6.407630] originally by Donald Becker <becker@scyld.com>
[ 6.407635] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 6.640306] FDC 0 is a post-1991 82077
[ 6.708571] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 6.708843] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.713969] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 6.714081] PCI: setting IRQ 5 as level-triggered
[ 6.714092] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI
5 (level, low) -> IRQ 5
[ 6.714326] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 6.714343] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 6.714928] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned
bus number 1
[ 6.715093] uhci_hcd 0000:00:1f.2: irq 5, io base 0x0000d000
[ 6.715663] usb usb1: configuration #1 chosen from 1 choice
[ 6.715860] hub 1-0:1.0: USB hub found
[ 6.715976] hub 1-0:1.0: 2 ports detected
[ 6.820933] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.821053] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.821149] usb usb1: Product: UHCI Host Controller
[ 6.821221] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 6.821296] usb usb1: SerialNumber: 0000:00:1f.2
[ 6.821600] 8139cp 0000:01:04.0: This (id 10ec:8139 rev 10) is not an
8139C+ compatible chip
[ 6.821702] 8139cp 0000:01:04.0: Try the "8139too" driver instead.
[ 6.833225] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 6.833344] PCI: setting IRQ 11 as level-triggered
[ 6.833355] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKB] -> GSI
11 (level, low) -> IRQ 11
[ 6.836646] natsemi eth0: NatSemi DP8381[56] at 0xd5001000
(0000:01:05.0), 00:0f:b5:f5:a8:f9, IRQ 11, port TP.
[ 6.838819] 8139too Fast Ethernet driver 0.9.28
[ 6.839802] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12
[ 6.839881] PCI: setting IRQ 12 as level-triggered
[ 6.839893] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI
12 (level, low) -> IRQ 12
[ 6.841775] eth1: RealTek RTL8139 at 0xc000, 00:e0:4c:47:ca:a8, IRQ 12
[ 6.841858] eth1: Identified 8139 chip type 'RTL-8139C'
[ 6.867548] No dock devices found.
[ 6.941047] SCSI subsystem initialized
[ 7.003130] libata version 3.00 loaded.
[ 7.167303] hdb: max request size: 512KiB
[ 7.170201] hdb: 78165360 sectors (40020 MB) w/2048KiB Cache,
CHS=16383/255/63
[ 7.173128] hdb: cache flushes supported
[ 7.173508] hdb: hdb1 hdb2 hdb3
[ 7.189893] udev: renamed network interface eth1 to eth0
[ 7.203010] udev: renamed network interface eth0_rename to eth1
[ 7.340132] Marking TSC unstable due to: TSC halts in idle.
[ 7.743416] PM: Starting manual resume from disk
[ 7.836686] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 7.836805] EXT3-fs: write access will be enabled during recovery.
[ 9.842112] kjournald starting. Commit interval 5 seconds
[ 9.842321] EXT3-fs: recovery complete.
[ 9.844807] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.044189] udevd version 125 started
[ 15.353687] input: PC Speaker as /class/input/input1
[ 16.911612] Linux agpgart interface v0.103
[ 16.934019] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.101724] agpgart: Detected an Intel i810 Chipset.
[ 17.115893] agpgart: AGP aperture is 64M @ 0xd0000000
[ 17.134193] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.154661] intel_rng: FWH not detected
[ 18.820062] parport_pc 00:0b: reported by Plug and Play ACPI
[ 18.820272] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 19.416016] gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io
0x201, speed 890kHz
[ 19.620928] Error: Driver 'pcspkr' is already registered, aborting...
[ 19.830647] input: Power Button (FF) as /class/input/input2
[ 19.864347] ACPI: Power Button (FF) [PWRF]
[ 19.864762] input: Power Button (CM) as /class/input/input3
[ 19.889834] ACPI: Power Button (CM) [PWRB]
[ 19.890223] input: Sleep Button (CM) as /class/input/input4
[ 19.918276] ACPI: Sleep Button (CM) [SLPB]
[ 23.502943] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKD] -> GSI
5 (level, low) -> IRQ 5
[ 25.451192] Adding 979924k swap on /dev/hdb1. Priority:-1 extents:1
across:979924k
[ 25.806686] EXT3 FS on hdb2, internal journal
[ 26.550701] loop: module loaded
[ 26.828669] device-mapper: uevent: version 1.0.3
[ 26.833728] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18)
initialised: dm-devel@redhat.com
[ 27.571505] kjournald starting. Commit interval 5 seconds
[ 27.572264] EXT3 FS on hdb3, internal journal
[ 27.572385] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.420831] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 29.562929] eth1: DSPCFG accepted after 0 usec.
[ 29.563051] eth1: link up.
[ 29.563181] eth1: Setting full-duplex based on negotiated link
capability.
[ 30.420682] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 30.587252] NET: Registered protocol family 10
[ 30.589497] lo: Disabled Privacy Extensions
[ 37.128911] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 41.180198] eth1: no IPv6 routers present
[ 41.508189] eth0: no IPv6 routers present
[78197.623213] eth0: link down
[78503.681874] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[78508.770625] eth0: link down
[78512.909588] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
lsmod .. algo grande tambien
root@debian:~# lsmod
Module Size Used by
nf_nat_ftp 2528 0
nf_conntrack_ftp 6852 1 nf_nat_ftp
nf_nat_irc 2080 0
nf_conntrack_irc 5124 1 nf_nat_irc
ipt_ULOG 6820 5
xt_limit 2180 5
ipt_MASQUERADE 2592 1
iptable_nat 4680 1
nf_nat 15576 4
nf_nat_ftp,nf_nat_irc,ipt_MASQUERADE,iptable_nat
xt_state 2016 49
xt_tcpudp 2816 32
nf_conntrack_ipv4 12268 52 iptable_nat,nf_nat
nf_conntrack 55540 9
nf_nat_ftp,nf_conntrack_ftp,nf_nat_irc,nf_conntrack_irc,ipt_MASQUERADE,iptable_nat,nf_nat,xt_state,nf_conntrack_ipv4
iptable_filter 2624 1
ipv6 235396 48
ip_tables 10160 2 iptable_nat,iptable_filter
x_tables 13284 7
ipt_ULOG,xt_limit,ipt_MASQUERADE,iptable_nat,xt_state,xt_tcpudp,ip_tables
dm_snapshot 14340 0
dm_mirror 15136 0
dm_log 8452 1 dm_mirror
dm_mod 46216 3 dm_snapshot,dm_mirror,dm_log
loop 12748 0
snd_cmipci 28992 0
snd_cs4232 11380 0
snd_opl3_lib 9344 2 snd_cmipci,snd_cs4232
snd_hwdep 6212 1 snd_opl3_lib
snd_cs4231_lib 20512 1 snd_cs4232
button 6096 0
snd_mpu401 6152 0
snd_mpu401_uart 6368 3 snd_cmipci,snd_cs4232,snd_mpu401
snd_rawmidi 18496 1 snd_mpu401_uart
snd_seq_device 6380 2 snd_opl3_lib,snd_rawmidi
ns558 3712 0
snd_pcm 62660 2 snd_cmipci,snd_cs4231_lib
snd_timer 17800 3 snd_opl3_lib,snd_cs4231_lib,snd_pcm
gameport 10700 3 snd_cmipci,ns558
parport_pc 22500 0
parport 30988 1 parport_pc
snd 45636 11
snd_cmipci,snd_cs4232,snd_opl3_lib,snd_hwdep,snd_cs4231_lib,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_cs4231_lib,snd_pcm
rng_core 3940 0
shpchp 25528 0
intel_agp 22524 1
pci_hotplug 23460 1 shpchp
agpgart 28808 1 intel_agp
pcspkr 2432 0
evdev 8000 0
ext3 105576 2
jbd 39476 1 ext3
mbcache 7108 1 ext3
ide_disk 10496 4
ata_generic 4676 0
libata 140448 1 ata_generic
scsi_mod 129548 1 libata
dock 8304 1 libata
8139too 20384 0
ide_pci_generic 3908 0 [permanent]
floppy 47716 0
natsemi 23616 0
8139cp 16800 0
mii 4896 2 8139too,8139cp
uhci_hcd 18672 0
piix 6568 0 [permanent]
usbcore 118192 2 uhci_hcd
ide_core 96168 3 ide_disk,ide_pci_generic,piix
thermal 15228 0
processor 32576 2 thermal
fan 4196 0
thermal_sys 10856 3 thermal,processor,fan
root@debian:~#
el modem es un modem externo, marka ZYXEL U-336 E
saludos y garcias por la ayuda ....
--
Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas
Infomed: http://www.sld.cu/
Reply to: