Tarjeta de red pcmcia(largo)
Holas de nuevo.
Me he comprado un juego de esos de "tarjetas de
red", una para patatamovil (portatil) y otra para
patata (el gordo).
En patata me va todo bien, pero no puedo ver el
portatil (de hecho, aun no lo he conseguido ni en
win).
El portatil instala pcmcia bien, reconoce cuando la
meto y cuando la saco (la tarjetaaaaaaaaaaa :P) y me
carga el modulo tulip. Segun las especificaciones de
la tarjeta el driver es pcnet_cs, pero si lo cargo no
lo usa:
Can quickly remove adapter to reuse PCMCIA slot
OS Support : Windows 95/98, WindowsNT 3.51 upwards,
Windows 2000
Windows ME, NDIS 3.0 and NDIS 3.1 Driver, Linux,
FreeBSD
Linux Driver pcnet_cs
(some OS support is via web FREE driver download)
..........
Cada ordenador se hace auto ping bien, pero no
reconoce al otro (no lo ve).
Alguna idea? Os incluyo informacion de intentos
mios y demas:
Socket 0:
not configured
Socket 1:
Vcc 5.0V Vpp1 5.0V Vpp2 5.0V
cardctl config
patatamovil:/var/lib/misc# lsmod
Module Size Used by
tulip_cb 32120 1
cb_enabler 2632 2 [tulip_cb]
pcnet_cs 8496 0 (unused)
ds 6536 2 [cb_enabler
pcnet_cs]
i82365 28524 2
pcmcia_core 44480 0 [cb_enabler pcnet_cs
ds i82365]
nls_cp437 3880 2 (autoclean)
parport_pc 7228 0 (autoclean) (unused)
parport 6660 0 [parport_pc]
patatamovil:/var/lib/misc#
patatamovil:/var/lib/misc# cardctl ident
Socket 0:
no product info available
Socket 1:
product info: "corega K.K.", "corega FastEther
PCC-TX"
manfid: 0xc00f, 0x0000
function: 6 (network)
network.opts
# NOTE: This file was generated automatically by the
pcnetconfig script.
# Network adapter configuration
#
# The address format is
"scheme,socket,instance,hwaddr".
#
# Note: the "network address" here is NOT the same as
the IP address.
# See the Networking HOWTO. In short, the network
address is the IP
# address masked by the netmask.
#
case "$ADDRESS" in
*,*,*,*)
INFO="Sample private network setup"
# Transceiver selection, for some cards -- see
'man ifport'
IF_PORT=""
# Use BOOTP (via /sbin/bootpc)? [y/n]
BOOTP="n"
# Use DHCP (via /sbin/dhcpcd or /sbin/dhclient)?
[y/n]
DHCP="n"
# If BOTH dhcpcd and dhclient are installed, the
network script will
# use dhcpcd. It can be forced to use dhclient
instead.
# Use /sbin/dhclient instead of /sbin/dhcpcd?
[y/n]
DHCLIENT="n"
# Use /sbin/pump for BOOTP/DHCP? [y/n]
PUMP="n"
# Host's IP address, netmask, network address,
broadcast address
IPADDR="192.168.0.2"
NETMASK="255.255.255.0"
NETWORK="192.168.0.0"
BROADCAST="192.168.0.255"
# Gateway address for static routing
GATEWAY="192.168.0.1"
# Things to add to /etc/resolv.conf for this
interface
DOMAIN="home"
SEARCH=""
# The nameserver IP addresses specified here
complement the
# nameservers already defined in /etc/resolv.conf.
These nameservers
# will be added to /etc/resolv.conf automatically
when the PCMCIA
# network connection is established and removed
from this file when
# the connection is broken.
DNS_1=""
DNS_2=""
DNS_3=""
# NFS mounts, should be listed in /etc/fstab
MOUNTS=""
# For IPX interfaces, the frame type and network
number
IPX_FRAME=""
IPX_NETNUM=""
# Run ipmasq? [y/n] (see the Debian ipmasq
package)
IPMASQ="n"
# Extra stuff to do after setting up the interface
start_fn () { return; }
# Extra stuff to do before shutting down the
interface
stop_fn () { return; }
;;
esac
patatamovil:/etc/pcmcia# find /proc -name eth*
/proc/sys/net/ipv4/conf/eth0
patatamovil:/proc/sys/net/ipv4/conf/eth0# ls
accept_redirects forwarding mc_forwarding
secure_redirects
accept_source_route hidden proxy_arp
send_redirects
bootp_relay log_martians rp_filter
shared_media
patatamovil:/proc/sys/net/ipv4/conf/eth0# ls
accept_redirects forwarding mc_forwarding
secure_redirects
accept_source_route hidden proxy_arp
send_redirects
bootp_relay log_martians rp_filter
shared_media
patatamovil:/proc/sys/net/ipv4/conf/eth0# cat *
1
1
0
0
0
0
0
0
1
1
1
1
/proc/sys/net/ipv4/neigh/eth0
patatamovil:/proc/sys/net/ipv4/neigh/eth0# ls
anycast_delay delay_first_probe_time
mcast_solicit retrans_time
app_solicit gc_stale_time
proxy_delay ucast_solicit
base_reachable_time locktime
proxy_qlen unres_qlen
patatamovil:/proc/sys/net/ipv4/neigh/eth0# cat *
100
0
30
5
60
100
3
80
64
100
3
3
/proc/sys/net/ethernet -> esta vacio
____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
Reply to: