apt-get --configure --pending
Hola a todos:
He actualizado Slink a Potato con apt-get dist-upgrade. Todo bien hasta
aquí.
Sin embargo, los paquetes nuevos (3.3.3-7) de xdm y xbase (dependiente
del primero), no se han podido configurar automáticamente . Uso apt-get
--configure --pending después y da error. He intentado reinstalar los
paquetes
iniciando Linux en runlevel 2 (sin xdm) por si acaso y nada.
Adjunto el /var/log/xdm.log. Parece ser que hay problemas con la tarjeta
S3V (una veterana S3C325 PCI). Sin embargo las Xwindows funcionan
perfectamente. ¿Qué puedo hacer para solucionarlo?.
Gracias y Saludos.
Oscar González
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.15pre20 i686 [ELF]
Configured drivers:
S3V: accelerated server for S3 graphics adaptors (Patchlevel 0)
s3_ViRGE
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "es"
(**) Mouse: type: IMPS/2, device: /dev/mouse, buttons: 5
(**) Mouse: zaxismapping: (-)4 (+)5
(**) S3V: Graphics device ID: "Primary Card"
(**) S3V: Monitor ID: "Primary Monitor"
Warning: The directory "/usr/X11R6/lib/X11/fonts/local" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/truetype,/usr/X11R6/lib/X11/fonts/jmk,/usr/X11R6/lib/X11/fonts/convert,/usr/X11R6/lib/X11/fonts/Adobe,unix/:7100"
(--) S3V: PCI: ViRGE rev 6, Linear FB @ 0xe0000000
(--) S3V: chipset: ViRGE rev. 6
(--) S3V: chipset driver: s3_ViRGE
(**) S3V: videoram: 2048k
(--) S3V: Ramdac type: s3_trio64
(--) S3V: Ramdac speed: 135 MHz (95 MHz for 16 bpp)
(--) S3V: Using Trio32/64 programmable clock (MCLK 50.114 MHz)
(--) S3V: Maximum allowed dot-clock: 95.000 MHz
(**) S3V: Mode "1024x768": mode clock = 65.000
(--) S3V: There is no mode definition named "800x640"
(--) S3V: Removing mode "800x640" from list of valid modes.
(**) S3V: Using 16 bpp. Color weight: 565
(--) S3V: Virtual resolution set to 1024x768
(--) S3V: Local bus LAW is 0xE00xxxxx
(--) S3V: Using a banksize of 2048k, line width of 1024
Warning: Cannot convert string "true " to type Boolean
X connection to :0.0 broken (explicit kill or server shutdown).
Warning: Cannot convert string "true " to type Boolean
Caught signal 11.
Server aborting...
Reply to: