Re: Problemas con sound blaster 128
He hechado un vistazo por /proc y en /proc/pci reconoce el dispositivo enqsonic pero dice que
es desconocido, no se si esto será normal, el caso es que en /proc/interrupts no aparece por
ninguna parte la interrupción de la tarjeta. No se que puede pasar. Adjunto los ficheros
/proc/pci /proc/interrupts y el dmesg a ver si alguien entiende lo que puede pasar. También
indicar que he compilado el kernel con soporte para la enqsonic correcta, pero al arrancar no
aparece nada :-o como se ve en el dmesg.
Linux version 2.2.10 (root@cronos) (gcc version 2.7.2.3) #1 Sat Sep 11 18:07:39 CEST 1999
Detected 342617060 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 341.61 BogoMIPS
Memory: 63580k/65536k available (668k kernel code, 412k reserved, 840k data, 36k init)
CPU: Intel Pentium II (Deschutes) stepping 00
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35 (19990512) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfb4d0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: ST34321A, ATA DISK drive
hdc: Creative CD-ROM CD4832E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST34321A, 4103MB w/128kB Cache, CHS=523/255/63, UDMA
hdc: ATAPI 44X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Partition check:
hda:hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
hda: set_multmode: error=0x04 { DriveStatusError }
hda1 hda2 < hda5 hda6 hda7 hda8 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 36k freed
Adding Swap: 64224k swap-space (priority -1)
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
less uses obsolete /proc/pci interface
CPU0
0: 56665 XT-PIC timer
1: 1194 XT-PIC keyboard
2: 0 XT-PIC cascade
12: 9785 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 3425 XT-PIC ide0
15: 5 XT-PIC ide1
NMI: 0
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 440LX - 82443LX PAC Host (rev 3).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xe0000000 [0xe0000008].
Bus 0, device 1, function 0:
PCI bridge: Intel 440LX - 82443LX PAC AGP (rev 3).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=64. Min Gnt=10.
Bus 0, device 7, function 0:
ISA bridge: Intel 82371AB PIIX4 ISA (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
Bus 0, device 7, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=64.
I/O at 0xf000 [0xf001].
Bus 0, device 7, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable. Latency=64.
I/O at 0xe000 [0xe001].
Bus 0, device 7, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 1).
Medium devsel. Fast back-to-back capable.
Bus 0, device 19, function 0:
Multimedia audio controller: Ensoniq Unknown device (rev 6).
Vendor id=1274. Device id=1371.
Slow devsel. IRQ 10. Master Capable. Latency=64. Min Gnt=12.Max Lat=128.
I/O at 0xe400 [0xe401].
Bus 1, device 0, function 0:
VGA compatible controller: NVidia/SGS Thomson Riva 128 (rev 16).
Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable. Latency=64. Min Gnt=3.Max Lat=1.
Non-prefetchable 32 bit memory at 0xe4000000 [0xe4000000].
Prefetchable 32 bit memory at 0xe6000000 [0xe6000008].
Reply to: