Placa Creative Sound Blaster Audigy SE sem som
Oi Pessoal,
Comprei recentemente uma placa creative Sound Blaster Audigy SE para
ripar fitas k7.
No entanto não consigo nem obter som da placa.
Ela foi detectada e usando o alsaconf foi configurada normalmente.
Desativei minha antiga placa onboard na bios.
Independente do programa que uso (xmms, mplayer, vlc), em nenhum deles
consigo audio, mesmo eles não detectando erro algum.
Eu gostaria de saber se alguém já passou por problema parecido e pode me
ajudar.
Segue algumas informações sobre meu sistema (lspci, lsmod, dmesg, ls
/dev/dsp*):
# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 745 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI
bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
Bridge)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 07)
00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 07)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00:0a.0 Multimedia audio controller: Creative Labs SB Audigy LS
00:0b.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
(rev 24)
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX
440 AGP 8x] (rev a4)
#lsmod | grep snd
snd_cmipci 31328 0
gameport 14152 1 snd_cmipci
snd_opl3_lib 9728 1 snd_cmipci
snd_hwdep 8836 1 snd_opl3_lib
snd_mpu401_uart 7744 1 snd_cmipci
snd_seq_dummy 3716 0
snd_seq_oss 28224 0
snd_ca0106 29412 1
snd_seq_midi 8096 0
snd_seq_midi_event 6912 2 snd_seq_oss,snd_seq_midi
snd_rawmidi 22944 3 snd_mpu401_uart,snd_ca0106,snd_seq_midi
snd_ac97_codec 82912 1 snd_ca0106
snd_pcm_oss 38624 0
snd_mixer_oss 15232 1 snd_pcm_oss
snd_seq 44304 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_pcm 68744 4
snd_cmipci,snd_ca0106,snd_ac97_codec,snd_pcm_oss
snd_ac97_bus 2240 1 snd_ac97_codec
snd_timer 20932 3 snd_opl3_lib,snd_seq,snd_pcm
snd_seq_device 7692 6
snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd_page_alloc 9480 2 snd_ca0106,snd_pcm
snd 46756 16
snd_cmipci,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_oss,snd_ca0106,snd_rawmidi,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_pcm,snd_timer,snd_seq_device
soundcore 9248 1 snd
#ls /dev/dsp*
/dev/dsp /dev/dsp1
#dmesg
00:02: ioport range 0xe400-0xe47f could not be reserved
pnp: 00:02: ioport range 0xe480-0xe4ff has been reserved
pnp: 00:02: ioport range 0xe600-0xe61f has been reserved
pnp: 00:02: ioport range 0x480-0x48f has been reserved
pnp: 00:0f: ioport range 0x290-0x297 has been reserved
pnp: 00:0f: ioport range 0x500-0x507 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: e7000000-e7ffffff
PREFETCH window: eff00000-febfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
PM: Adding info for platform:pcspkr
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1200021845.412:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PM: Adding info for platform:vesafb.0
vesafb: framebuffer at 0xf0000000, mapped to 0xf0880000, using 6144k,
total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:e4c0
vesafb: pmi: set display start = c00ce4f6, set palette = c00ce560
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce
3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash: scanning last 2MB of initrd for signature
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size
118816 bytes,<6>...found (1024x768, 209708 bytes, v3).
Console: switching to colour frame buffer device 121x44
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
PM: Adding info for platform:serial8250
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PPP generic driver version 2.4.2
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
PM: Adding info for platform:i8042
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
PM: Adding info for serio:serio0
PM: Adding info for serio:serio1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4500KiB [1 disk] into ram disk... <6>Time: tsc
clocksource has been installed.
done.
VFS: Mounted root (cramfs filesystem) readonly.
input: AT Translated Set 2 keyboard as /class/input/input0
Freeing unused kernel memory: 168k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS745 ATA 100 (2nd gen) controller
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 2F030J0, ATA DISK drive
PM: Adding info for No Bus:ide0
hdb: SAMSUNG SP0842N, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PM: Adding info for ide:0.0
PM: Adding info for ide:0.1
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
PM: Adding info for No Bus:ide1
hdd: SAMSUNG CD-ROM SC-152L, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
PM: Adding info for ide:1.0
PM: Adding info for ide:1.1
hda: max request size: 128KiB
hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hda1: <openbsd: hda8 hda9 hda10 hda11 hda12bad subpartition - ignored
bad subpartition - ignored
>
hdb: max request size: 512KiB
hdb: Host Protected Area detected.
current capacity is 66055248 sectors (33820 MB)
native capacity is 156301488 sectors (80026 MB)
hdb: Host Protected Area disabled.
hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63,
UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2
hdb1: <openbsd:bad subpartition - ignored
>
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not
inserted.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
eth0: RealTek RTL8139 at 0xa000, 00:50:fc:c1:4b:f5, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at f108a000.
input: PC Speaker as /class/input/input1
udev: renamed network interface eth1 to eth0
udev: renamed network interface eth0_rename to eth1
Linux agpgart interface v0.101 (c) Dave Jones
Real Time Clock Driver v1.12ac
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
PM: Adding info for No Bus:i2c-0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PM: Adding info for platform:floppy.0
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
agpgart: Detected SiS 745 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
ohci_hcd 0000:00:02.2: OHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.2: created debug files
ohci_hcd 0000:00:02.2: irq 11, io mem 0xe6800000
ohci_hcd 0000:00:02.2: resetting from state 'reset', control = 0x0
ohci_hcd 0000:00:02.2: enabling initreset quirk
ohci_hcd 0000:00:02.2: OHCI controller state
ohci_hcd 0000:00:02.2: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.2: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:02.2: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.2: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.2: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:00:02.2: hcca frame #0003
ohci_hcd 0000:00:02.2: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
ohci_hcd 0000:00:02.2: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.2: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.2: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.2: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.2: roothub.portstatus [2] 0x00000100 PPS
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18 ohci_hcd
usb usb1: SerialNumber: 0000:00:02.2
PM: Adding info for usb:usb1
usb usb1: uevent
PM: Adding info for No Bus:usbdev1.1_ep00
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
PM: Adding info for usb:1-0:1.0
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: global over-current protection
hub 1-0:1.0: power on to power good time: 2ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: no over-current condition exists
hub 1-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
PM: Adding info for No Bus:usbdev1.1_ep81
drivers/usb/core/inode.c: creating file '001'
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 11 (level,
low) -> IRQ 11
ohci_hcd 0000:00:02.3: OHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.3: created debug files
ohci_hcd 0000:00:02.3: irq 11, io mem 0xe6000000
ohci_hcd 0000:00:02.3: resetting from state 'reset', control = 0x0
ohci_hcd 0000:00:02.3: enabling initreset quirk
ohci_hcd 0000:00:02.3: OHCI controller state
ohci_hcd 0000:00:02.3: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.3: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:02.3: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.3: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.3: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:00:02.3: hcca frame #0003
ohci_hcd 0000:00:02.3: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
ohci_hcd 0000:00:02.3: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.3: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.3: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.3: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.3: roothub.portstatus [2] 0x00000100 PPS
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.18 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.3
PM: Adding info for usb:usb2
usb usb2: uevent
PM: Adding info for No Bus:usbdev2.1_ep00
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
PM: Adding info for usb:2-0:1.0
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
PM: Adding info for No Bus:usbdev2.1_ep81
drivers/usb/core/inode.c: creating file '001'
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
Model 100a Rev 00000000 Serial 100a1102
ohci_hcd 0000:00:02.2: suspend root hub
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
ohci_hcd 0000:00:02.3: suspend root hub
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 10 (level,
low) -> IRQ 10
ts: Compaq touchscreen protocol output
Adding 682720k swap on /dev/hda6. Priority:-1 extents:1 across:682720k
EXT3 FS on hda2, internal journal
lp0: using parport0 (interrupt-driven).
PM: Adding info for No Bus:i2c-9191
it87: Found IT8705F chip at 0x290, revision 2
PM: Adding info for i2c:9191-0290
it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
drivers/usb/core/inode.c: usbfs: unrecognised mount option "gid=46" or
missing value
drivers/usb/core/inode.c: usbfs: mount parameter error:
eth0: setting full-duplex.
eth1: link down
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6 over IPv4 tunneling driver
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found
(1024x768, 188455 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found
(1024x768, 188455 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found
(1024x768, 188455 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found
(1024x768, 188455 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found
(1024x768, 188455 bytes, v3).
bootsplash: status on console 5 changed to on
ACPI: Invalid PBLK length [5]
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ppdev: user-space parallel port driver
eth0: no IPv6 routers present
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (6143 buckets, 49144 max) - 224 bytes per conntrack
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16
21:56:04 PDT 2006
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
PM: Adding info for No Bus:i2c-1
i2c_adapter i2c-1: SMBus Quick command not supported, can't probe for chips
PM: Adding info for No Bus:i2c-2
i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips
PM: Adding info for No Bus:i2c-3
i2c_adapter i2c-3: SMBus Quick command not supported, can't probe for chips
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
Reply to: