Olá a todos(as) da Lista!
Estou rodando 4 máquinas Virtuais no VMWare com Debian e tenho no meu computador um drive de Fita DAT DDS4 para rodar com o Bacula nestas máquinas Virtuais. Entretanto, o Drive não é reconhecido pelo Debian. Ao executar o comando:
# tar tvf /dev/st0
Ocorre o erro:
tar: /dev/st0: Cannot open: no such device or Adress
tar: Error is not recoverable: exiting now
Tentei carregar os módulos "st" e "scsi_mod" pelo modprobe mas não deu certo.
Segue abaixo a mensagem do lsmod e do dmesg
LSMOD:
Module Size Used by
ide_scsi 15492 0
st 35740 0
ipv6 229892 8
nls_cp437 6016 0
isofs 33976 0
parport_pc 33348 0
parport 37320 1 parport_pc
pcspkr 3816 0
snd_ens1371 23012 0
snd_rawmidi 23204 1 snd_ens1371
snd_seq_device 7944 1 snd_rawmidi
snd_pcm 85384 1 snd_ens1371
snd_page_alloc 11144 1 snd_pcm
snd_timer 23300 1 snd_pcm
snd_ac97_codec 59268 1 snd_ens1371
snd 50660 6 snd_ens1371,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer,snd_ac97_codec
pciehp 83948 0
shpchp 87148 0
pci_hotplug 30640 2 pciehp,shpchp
intel_agp 20512 1
es1371 33472 0
soundcore 9824 2 snd,es1371
gameport 4736 2 snd_ens1371,es1371
ac97_codec 16908 1 es1371
agpgart 31784 1 intel_agp
evdev 9088 0
mousedev 9996 0
capability 4872 0
tsdev 7168 0
commoncap 7168 1 capability
psmouse 17800 0
rtc 12088 0
reiserfs 209872 1
pcnet32 25864 0
mii 4864 1 pcnet32
ds 17796 0
yenta_socket 19200 0
pcmcia_core 63028 2 ds,yenta_socket
sd_mod 20480 3
ide_cd 38176 0
cdrom 35740 1 ide_cd
ide_disk 16768 0
ide_generic 1664 0
pdc202xx_new 10012 0
aec62xx 10012 0
alim15x3 11404 0
amd74xx 13340 0
atiixp 8472 0
cmd64x 11548 0
cs5520 6408 0
cs5530 6664 0
cy82c693 4996 0
generic 4608 0
hpt34x 5760 0
ns87415 4936 0
opti621 4740 0
pdc202xx_old 15388 0
rz1000 3200 0
sc1200 8456 0
serverworks 12308 0
siimage 12032 0
sis5513 15240 0
slc90e66 8200 0
triflex 5380 0
trm290 4740 0
via82cxxx 12956 0
floppy 54992 0
usb_storage 59328 0
piix 12448 1
ide_core 125028 29 ide_scsi,ide_cd,ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cy82c693,generic,hpt34x,ns87415,opti621,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,piix
fbcon 27524 70
vga16fb 12456 1
vgastate 8576 1 vga16fb
usbserial 27112 0
usbhid 28864 0
usbkbd 6912 0
uhci_hcd 29328 0
usbcore 104164 7 usb_storage,usbserial,usbhid,usbkbd,uhci_hcd
thermal 12944 0
processor 17584 1 thermal
fan 4236 0
BusLogic 72604 2
scsi_mod 115148 5 ide_scsi,st,sd_mod,usb_storage,BusLogic
unix 26036 4
font 8576 1 fbcon
vesafb 6688 0
cfbcopyarea 3840 2 vga16fb,vesafb
cfbimgblt 3200 2 vga16fb,vesafb
cfbfillrect 3712 2 vga16fb,vesafb
DMESG:
Linux version 2.6.8-2-386 (horms@tabatha.lab.ultramonkey.org) (gcc version
3.3.5 (Debian 1:3.3.5-13)) #1 Tue Aug 16 12:46:35 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000003ef0000 (usable)
BIOS-e820: 0000000003ef0000 - 0000000003efc000 (ACPI data)
BIOS-e820: 0000000003efc000 - 0000000003f00000 (ACPI NVS)
BIOS-e820: 0000000003f00000 - 0000000004000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
64MB LOWMEM available.
found SMP MP-table at 000f6ce0
On node 0 totalpages: 16384
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 12288 pages, LIFO batch:3
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6c70
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x03ef8062
ACPI: FADT (v001 INTEL 440BX 0x06040000 PTL 0x000f4240) @ 0x03efbf14
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x03efbf88
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x03efbfd8
ACPI: DSDT (v001 PTLTD Custom 0x06040000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 1
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/sda2 ro
Initializing CPU#0
PID hash table entries: 512 (order 9: 4096 bytes)
PM-Timer running at invalid rate: 93% of normal - aborting.
Detected 2674.802 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 57480k/65536k available (1337k kernel code, 7516k reserved, 732k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4997.12 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0febfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0febfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0febfbff 00000000 00000000 00000080
CPU: Intel(R) Celeron(R) CPU 2.66GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is
2661.0811 MHz.
..... host bus clock speed is 66.0033 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4404k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6ca0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9486, dseg 0x400
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0x1000-0x103f has been reserved
pnp: 00:0b: ioport range 0x1040-0x104f has been reserved
PnPBIOS: 20 nodes reported by PnP BIOS; 20 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 19 (level, low) -> IRQ 169
number of MP IRQ sources: 15.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 01000000
....... : arbitration: 01
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 1 0 1 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 001 01 1 1 0 1 0 1 1 B1
12 001 01 1 1 0 1 0 1 1 B9
13 001 01 1 1 0 1 0 1 1 A9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
Using vector-based indexing
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ177 -> 0:17
IRQ185 -> 0:18
IRQ169 -> 0:19
.................................... done.
PCI: Cannot allocate resource region 4 of device 0000:00:07.1
Simple Boot Flag at 0x36 set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4404 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI subsystem initialized
ACPI: PCI interrupt 0000:00:
10.0[A] -> GSI 17 (level, low) -> IRQ 177
scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com
>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0: Firmware Version: 5.07B, I/O Address: 0x1440, IRQ Channel: 177/Level
scsi0: PCI Bus: 0, Device: 16, Address: 0xE8800000, Host Adapter SCSI ID: 7
scsi0: Parity Checking: Enabled, Extended Translation: Enabled
scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi0 : BusLogic BT-958
Using anticipatory io scheduler
Vendor: VMware, Model: VMware Virtual S Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 02
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 169
uhci_hcd 0000:00:
07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: irq 169, io base 00001060
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c
: v2.0:USB HID core driver
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-
serial.c: USB Serial Driver core v2.0
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb0: VGA16 VGA frame buffer device
Console: switching to colour frame buffer device 80x30
Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
inserting floppy driver for 2.6.8-2-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide1: BM-DMA at 0x1478-0x147f, BIOS settings: hdc:DMA, hdd:pio
hdc: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 1X CD-ROM drive, 32kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
SCSI device sda: 1677721 512-byte hdwr sectors (859 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 p2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
pcnet32.c:v1.30i 06.28.2004 tsbogend@alpha.franken.de
ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 18 (level, low) -> IRQ 185
pcnet32: PCnet/PCI II 79C970A at 0x1080, 00 0c 29 82 2e 25 assigned IRQ 185.
eth0: registered as PCnet/PCI II 79C970A
pcnet32: 1 cards_found.
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
scsi0: Tagged Queuing now active for Target 0
Adding 128480k swap on /dev/sda1. Priority:-1 extents:1
Real Time Clock Driver
v1.12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
ts: Compaq touchscreen protocol output
Capability LSM initialized
mice: PS/2 mouse device common for all mice
scsi0: Adopting Geometry 255/63 from Partition Table
Linux agpgart interface v0.100 (c) Dave Jones
es1371: version v0.32 time 13:08:21 Aug 16 2005
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 19 (level, low) -> IRQ 169
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x02
es1371: found es1371 rev 2 at io 0x1400 irq 169 joystick 0x0
ac97_codec: AC97 codec, id: CRY19 (Cirrus Logic CS4297A rev A)
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 28M
agpgart: AGP aperture is 64M @ 0xec000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: PC Speaker
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
scsi0: Allocated 7 additional CCBs (total now 35)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02cc960(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
st: Version 20040403, fixed bufsize 32768, s/g segs 256
Agradeço desde já pela força!
Abraços
Sérgio Silva