IRQ routing conflict for 00:10.0, have irq 10, want irq 3

Linux version 2.4.27-2-386 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.6 (Debian 1:3.3.6-8)) #1 Tue Aug 16 15:28:25 JST 2005

BIOS-provided physical RAM map:

BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)

BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)

BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)

BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)

511MB LOWMEM available.

On node 0 totalpages: 131068

zone(0): 4096 pages.

zone(1): 126972 pages.

zone(2): 0 pages.

ACPI: RSDP (v000 ASUS ) @ 0x000f5e20

ACPI: RSDT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc000

ACPI: FADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc0b2

ACPI: BOOT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc030

ACPI: MADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc058

ACPI: DSDT (v001 ASUS A7V8X-X 0x00001000 MSFT 0x0100000b) @ 0x00000000

ACPI: Local APIC address 0xfee00000

ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

Processor #0 Pentium(tm) Pro APIC version 16

ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])

Kernel command line: root=/dev/hda2 ro

Found and enabled local APIC!

Initializing CPU#0

Detected 1266.743 MHz processor.

Console: colour VGA+ 80x25

Calibrating delay loop... 2529.68 BogoMIPS

Memory: 515012k/524272k available (1069k kernel code, 8872k reserved, 459k data, 96k init, 0k highmem)

Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)

Inode cache hash table entries: 32768 (order: 6, 262144 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)

Page-cache hash table entries: 131072 (order: 7, 524288 bytes)

CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

CPU: L2 Cache: 256K (64 bytes/line)

CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000

CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000

CPU: AMD Athlon(TM) XP stepping 01

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Checking 'hlt' instruction... OK.

Checking for popad bug... OK.

POSIX conformance testing by UNIFIX

enabled ExtINT on CPU#0

ESR value before enabling vector: 00000000

ESR value after enabling vector: 00000000

Using local APIC timer interrupts.

calibrating APIC timer ...

..... CPU clock speed is 1266.7679 MHz.

..... host bus clock speed is 266.6878 MHz.

cpu: 0, clocks: 2666878, slice: 1333439

CPU0<T0:2666864,T1:1333424,D:1,S:1333439,C:2666878>

ACPI: Subsystem revision 20040326

ACPI: Interpreter disabled.

PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1

PCI: Using configuration type 1

PCI: Probing PCI hardware

PCI: ACPI tables contain no PCI IRQ routing entries

PCI: Probing PCI hardware (bus 00)

PCI: Using IRQ router VIA [1106/3177] at 00:11.0

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

VFS: Disk quotas vdquot_6.5.1

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x0

pty: 256 Unix98 ptys configured

Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled

ttyS00 at 0x03f8 (irq = 4) is a 16550A

RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize

Initializing Cryptographic API

NET4: Linux TCP/IP 1.0 for NET4.0

IP: routing cache hash table of 4096 buckets, 32Kbytes

TCP: Hash tables configured (established 32768 bind 65536)

Linux IP multicast router 0.06 plus PIM-SM

RAMDISK: cramfs filesystem found at block 0

RAMDISK: Loading 1300 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.

Freeing initrd memory: 1300k freed

VFS: Mounted root (cramfs filesystem).

Freeing unused kernel memory: 96k freed

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

ide: late registration of driver.

VP_IDE: IDE controller at PCI slot 00:11.1

VP_IDE: chipset revision 6

VP_IDE: not 100% native mode: will probe irqs later

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1

ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio

ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA

hda: ST380011A, ATA DISK drive

blk: queue e0825b60, I/O limit 4095Mb (mask 0xffffffff)

hdc: WDC AC22500L, ATA DISK drive

hdd: Hewlett-Packard CD-Writer Plus 8200, ATAPI CD/DVD-ROM drive

blk: queue e0825fb4, I/O limit 4095Mb (mask 0xffffffff)

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

ide1 at 0x170-0x177,0x376 on irq 15

hda: attached ide-disk driver.

hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(33)

hdc: attached ide-disk driver.

hdc: 4999680 sectors (2560 MB) w/256KiB Cache, CHS=4960/16/63, DMA

Partition check:

/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 >

/dev/ide/host0/bus1/target0/lun0: [PTBL] [620/128/63] p1

Journalled Block Device driver loaded

kjournald starting. Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal

Real Time Clock Driver v1.10f

hdd: attached ide-cdrom driver.

hdd: ATAPI 24X CD-ROM CD-R/RW drive, 2048kB Cache, DMA

Uniform CD-ROM driver Revision: 3.12

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

irda_init()

via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker

http://www.scyld.com/network/via-rhine.html

PCI: Assigned IRQ 5 for device 00:12.0

eth0: VIA VT6102 Rhine-II at 0xb400, 00:11:d8:81:ea:a5, IRQ 5.

eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.

SCSI subsystem driver Revision: 1.00

scsi0 : SCSI host adapter emulation for IDE ATAPI devices

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

usb-uhci.c: $Revision: 1.275 $ time 15:46:41 Aug 16 2005

usb-uhci.c: High bandwidth mode enabled

PCI: Found IRQ 3 for device 00:10.0

IRQ routing conflict for 00:10.0, have irq 10, want irq 3

IRQ routing conflict for 00:10.1, have irq 10, want irq 3

IRQ routing conflict for 00:10.2, have irq 10, want irq 3

IRQ routing conflict for 00:10.3, have irq 10, want irq 3

usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 10

usb-uhci.c: Detected 2 ports

usb.c: new USB bus registered, assigned bus number 1

hub.c: USB hub found

hub.c: 2 ports detected

PCI: Found IRQ 3 for device 00:10.1

IRQ routing conflict for 00:10.0, have irq 10, want irq 3

IRQ routing conflict for 00:10.1, have irq 10, want irq 3

IRQ routing conflict for 00:10.2, have irq 10, want irq 3

IRQ routing conflict for 00:10.3, have irq 10, want irq 3

usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10

usb-uhci.c: Detected 2 ports

usb.c: new USB bus registered, assigned bus number 2

hub.c: USB hub found

hub.c: 2 ports detected

PCI: Found IRQ 3 for device 00:10.2

IRQ routing conflict for 00:10.0, have irq 10, want irq 3

IRQ routing conflict for 00:10.1, have irq 10, want irq 3

IRQ routing conflict for 00:10.2, have irq 10, want irq 3

IRQ routing conflict for 00:10.3, have irq 10, want irq 3

usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 10

usb-uhci.c: Detected 2 ports

usb.c: new USB bus registered, assigned bus number 3

hub.c: USB hub found

hub.c: 2 ports detected

usb-uhci.c: v1.275:USB Universal Host Controller Interface driver

PCI: Found IRQ 3 for device 00:10.3

IRQ routing conflict for 00:10.0, have irq 10, want irq 3

IRQ routing conflict for 00:10.1, have irq 10, want irq 3

IRQ routing conflict for 00:10.2, have irq 10, want irq 3

IRQ routing conflict for 00:10.3, have irq 10, want irq 3

ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0

ehci_hcd 00:10.3: irq 10, pci mem e0879000

usb.c: new USB bus registered, assigned bus number 4

ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4

hub.c: USB hub found

hub.c: 6 ports detected

PCI: Found IRQ 4 for device 00:11.5

IRQ routing conflict for 00:11.5, have irq 3, want irq 4

PCI: Setting latency timer of device 00:11.5 to 64

ALSA ../alsa-kernel/pci/via82xx.c:583: codec_read: codec 0 is not valid [0x107e5370]

irda_init()

uhci.c: USB Universal Host Controller Interface driver v1.1

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001

eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.

parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]

parport0: irq 7 detected

lp0: using parport0 (polling).

apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)

spurious 8259A interrupt: IRQ7.

isapnp: Scanning for PnP cards...

isapnp: No Plug & Play device found

PCI: Found IRQ 4 for device 00:11.5

IRQ routing conflict for 00:11.5, have irq 3, want irq 4

PCI: Setting latency timer of device 00:11.5 to 64

ALSA ../alsa-kernel/pci/via82xx.c:583: codec_read: codec 0 is not valid [0x107e5370]

isapnp: Scanning for PnP cards...

isapnp: No Plug & Play device found

PCI: Found IRQ 4 for device 00:11.5

IRQ routing conflict for 00:11.5, have irq 3, want irq 4

PCI: Setting latency timer of device 00:11.5 to 64

ALSA ../alsa-kernel/pci/via82xx.c:583: codec_read: codec 0 is not valid [0x107e5370]

isapnp: Scanning for PnP cards...

isapnp: No Plug & Play device found

PCI: Found IRQ 4 for device 00:11.5

IRQ routing conflict for 00:11.5, have irq 3, want irq 4

PCI: Setting latency timer of device 00:11.5 to 64

ALSA ../alsa-kernel/pci/via82xx.c:583: codec_read: codec 0 is not valid [0x107e5370]