RE: Estou quase a desistir do Sarge

To: jopa@netcabo.pt, debian-user-portuguese@lists.debian.org
Subject: RE: Estou quase a desistir do Sarge
From: "Marcelo Reis" <joereis51@hotmail.com>
Date: Tue, 23 Aug 2005 22:50:54 +0000
Message-id: <[🔎] BAY20-F5278DA7A828B3ACC7C038A6A90@phx.gbl>
In-reply-to: <[🔎] 430B9F1F.30401@netcabo.pt>

Olá amigo!

Já tentou alterar essas configurações pelo modo texto?
(xorgconfig, XF86Config-4 , Xconfigurator, xf86config, x-configure, xf86cfg)
Algum desses deve funcionar!
Mas lembre-se de fazer um back-up dos arquivos que vc for alterar.
Alguns desses arquivos fica em /etc/X11/
outros vc pode chamar de qualquer lugar do console.
Tente tbm em modo grafico: CRTL + ALT + "+" ou "-", as vezes funciona.
Não desista amigo.
Vá a Luta filho da Pátria.
Abraço...


Marcelo Alves dos Reis
Profissional de Informática e Tecnologia
São Paulo-SP / Brasil

(o_
//\            - Software Livre -
V_/_    conhecimento ao alcance de todos

<BLOCKQUOTE style='PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #A0C6E52px solid; MARGIN-RIGHT: 0px'><fontstyle='FONT-SIZE:11px;FONT-FAMILY:tahoma,sans-serif'><hr color=#A0C6E5size=1>From: jopa <jopa@netcabo.pt> To:debian-user-portuguese@lists.debian.org Subject: Estou quase adesistir do Sarge Date: Tue, 23 Aug 2005 23:11:43+0100 >Olá, > >Depois de substituir o Ubuntu Hoary5.04 pelo Sarge, estou a passar >um mau bocado. Não conseguiconfigurar correctamente o tamanho da >tela. Tenho um monitor de17" mas nas preferencias pessoais só >aparece a opção de640X480... nem mais umaopção. >------------------------------------------------------------------------ >Paratentar reconfigurar usei: > >dpkg-reconfigurexserver-xfree86 > >experimentei as opções VESA e VGA e asvárias resoluções. >só funciona a 4 bits. Não éestranho? > >O meu monitor é LG Flatron L1710S17" > > >Na opção "Avançado" indiquei asfrequências: > >Vertical: 57-75 >Horizontal:30-83 > >A resolução indicada pela LG é 1280 X1024 >RGB >24 bit (porque é que só consigo 4bit?) >------------------------------------------------------------------------ >Paratentar esclarecer melhor publico o _dmesg_ e o_lspci_ > >jopa@debian:~$ _lspci_ >0000:00:00.0 Hostbridge: Silicon Integrated Systems [SiS] SiS 645xx >(rev51) >0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS]:Unknown >device 00030000:00:02.0 ISA bridge: Silicon IntegratedSystems [SiS] >SiS963 [MuTIOL Media IO] (rev 25) >0000:00:02.5IDE interface: Silicon Integrated Systems [SiS] 5513 >[IDE] >0000:00:02.7 Multimedia audio controller: SiliconIntegrated Systems >[SiS] Sound Controller (reva0) >0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB >1.0 Controller (rev 0f) >0000:00:03.1 USB Controller: SiliconIntegrated Systems [SiS] USB >1.0 Controller (rev0f) >0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB >2.0 Controller >0000:00:04.0 Ethernet controller: SiliconIntegrated Systems [SiS] >SiS900 PCI Fast Ethernet (rev91) >0000:00:0c.0 Multimedia audio controller: Creative Labs SB AudigyLS >0000:00:0d.0 FireWire (IEEE 1394): NEC Corporation IEEE 1394 Host >Controller (rev 01) >0000:01:00.0 VGA compatible controller:nVidia Corporation NV34 >[GeForce FX 5200] (reva1) >jopa@debian:~$ > >donde se verifica: _VGA compatiblecontroller: nVidia Corporation >NV34 [GeForce FX5200]_ > >e > >jopa@debian:~$ _dmesg_ >Linuxversion 2.4.27-2-686 (horms@tabatha.lab.ultramonkey.org) (gcc >version 3.3.5 (Debian 1:3.3.5-12)) #1 Mon May 16 17:03:22 JST2005 >BIOS-provided physical RAM map: >BIOS-e820:0000000000000000 - 000000000009fc00 (usable) >BIOS-e820:000000000009fc00 - 00000000000a0000 (reserved) >BIOS-e820:00000000000f0000 - 0000000000100000 (reserved) >BIOS-e820:0000000000100000 - 000000003fffc000 (usable) >BIOS-e820:000000003fffc000 - 000000003ffff000 (ACPI data) >BIOS-e820:000000003ffff000 - 0000000040000000 (ACPI NVS) >BIOS-e820:00000000fec00000 - 00000000fec01000 (reserved) >BIOS-e820:00000000fee00000 - 00000000fee01000 (reserved) >BIOS-e820:00000000ffff0000 - 0000000100000000 (reserved) >127MB HIGHMEMavailable. >896MB LOWMEM available. >On node 0 totalpages:262140 >zone(0): 4096 pages. >zone(1): 225280pages. >zone(2): 32764 pages. >ACPI: RSDP (v000 ASUS) @ >0x000f5710 >ACPI: RSDT (v001ASUS P4S800 0x42302e31 MSFT 0x31313031) @ >0x3fffc000 >ACPI: FADT (v001 ASUS P4S800 0x42302e31 MSFT0x31313031) @ >0x3fffc0c0 >ACPI: BOOT (v001 ASUS P4S8000x42302e31 MSFT 0x31313031) @ >0x3fffc030 >ACPI: MADT (v001ASUS P4S800 0x42302e31 MSFT 0x31313031) @ >0x3fffc058 >ACPI: DSDT (v001 ASUS P4S800 0x00001000 MSFT0x0100000b) @ >0x00000000 >ACPI: Local APIC address0xfee00000 >ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00]enabled) >Processor #0 Pentium 4(tm) XEON(tm) APIC version20 >ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >Kernelcommand line: root=/dev/hda2 ro >Found and enabled localAPIC! >Initializing CPU#0 >Detected 2667.315 MHzprocessor. >Console: colour VGA+ 80x25 >Calibrating delayloop... 5321.52 BogoMIPS >Memory: 1029688k/1048560k available (1197kkernel code, 18484k >reserved, 452k data, 116k init, 131056khighmem) >Dentry cache hash table entries: 131072 (order: 8, 1048576bytes) >Inode cache hash table entries: 65536 (order: 7, 524288bytes) >Mount cache hash table entries: 512 (order: 0, 4096bytes) >Buffer cache hash table entries: 65536 (order: 6, 262144bytes) >Page-cache hash table entries: 262144 (order: 8, 1048576bytes) >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2cache: 512K >Intel machine check architecture supported. >Intelmachine check reporting enabled on CPU#0. >CPU: After generic,caps: bfebfbff 00000000 00000000 00000000 >CPU: Commoncaps: bfebfbff 00000000 00000000 00000000 >CPU: Intel(R) Pentium(R) 4CPU 2.66GHz stepping 09 >Enabling fast FPU save and restore...done. >Enabling unmasked SIMD FPU exception support...done. >Checking 'hlt' instruction... OK. >POSIX conformancetesting by UNIFIX >enabled ExtINT on CPU#0 >ESR value beforeenabling vector: 00000000 >ESR value after enabling vector:00000000 >Using local APIC timer interrupts. >calibrating APICtimer ... >..... CPU clock speed is 2667.2240 MHz. >..... hostbus clock speed is 133.3611 MHz. >cpu: 0, clocks: 1333611, slice:666805 >CPU0<T0:1333600,T1:666784,D:11,S:666805,C:1333611> >mtrr:v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) >mtrr: detectedmtrr type: Intel >ACPI: Subsystem revision 20040326 >ACPI:Interpreter disabled. >PCI: PCI BIOS revision 2.10 entry at 0xf10c0,last bus=1 >PCI: Using configuration type 1 >PCI: Probing PCIhardware >PCI: ACPI tables contain no PCI IRQ routingentries >PCI: Probing PCI hardware (bus 00) >PCI: Using IRQrouter default [1039/0963] at 00:02.0 >Linux NET4.0 for Linux2.4 >Based upon Swansea University Computer SocietyNET3.039 >Initializing RT netlink socket >Startingkswapd >allocated 32 pages and 32 bhs reserved for the highmembounces >VFS: Disk quotas vdquot_6.5.1 >devfs: v1.12c (20020818)Richard Gooch (rgooch@atnf.csiro.au) >devfs: boot_options:0x0 >pty: 256 Unix98 ptys configured >Serial driver version5.05c (2001-07-08) with HUB-6 MANY_PORTS >MULTIPORT SHARE_IRQSERIAL_PCI enabled >ttyS00 at 0x03f8 (irq = 4) is a16550A >COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. ><info@itc.hu> >RAMDISK driver initialized: 16 RAM disksof 8192K size 1024 >blocksize >Initializing CryptographicAPI >NET4: Linux TCP/IP 1.0 for NET4.0 >IP: routing cache hashtable of 8192 buckets, 64Kbytes >TCP: Hash tables configured(established 262144 bind 65536) >Linux IP multicast router 0.06 plusPIM-SM >RAMDISK: cramfs filesystem found at block 0 >RAMDISK:Loading 4084 blocks [1 disk] into ram disk... done. >Freeing initrdmemory: 4084k freed >VFS: Mounted root (cramfsfilesystem). >Freeing unused kernel memory: 116k freed >NET4:Unix domain sockets 1.0/SMP for Linux NET4.0. >Uniform Multi-PlatformE-IDE driver Revision: 7.00beta4-2.4 >ide: Assuming 33MHz system busspeed for PIO modes; override with >idebus=xx >ide: lateregistration of driver. >SIS5513: IDE controller at PCI slot00:02.5 >SIS5513: chipset revision 0 >SIS5513: not 100% nativemode: will probe irqs later >SIS5513: SiS 962/963 MuTIOL IDE UDMA133controller > ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA,hdb:pio > ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA,hdd:DMA >hda: ST3120026A, ATA DISK drive >blk: queue f8829cc0,I/O limit 4095Mb (mask 0xffffffff) >hdc: HL-DT-ST DVDRAM GSA-4040B,ATAPI CD/DVD-ROM drive >hdd: HL-DT-STDVD-ROM GDR8162B, ATAPICD/DVD-ROM drive >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >ide1 at0x170-0x177,0x376 on irq 15 >hda: attached ide-diskdriver. >hda: 234441648 sectors (120034 MB) w/8192KiB Cache, >CHS=14593/255/63, UDMA(100) >Partitioncheck: >/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5> >Journalled Block Device driver loaded >kjournald starting.Commit interval 5 seconds >EXT3-fs: mounted filesystem with ordereddata mode. >Adding Swap: 634528k swap-space (priority -1) >EXT3FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal >RealTime Clock Driver v1.10f >hdc: attached ide-cdrom driver. >hdc:ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, >UDMA(33) >Uniform CD-ROM driver Revision: 3.12 >hdd:attached ide-cdrom driver. >hdd: ATAPI 48X DVD-ROM drive, 256kB Cache,UDMA(33) >sis900.c: v1.08.07 11/02/2003 >00:04.0: VIA 6103 PHYtransceiver found at address 1. >00:04.0: Using transceiver found ataddress 1 as default >eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ5, 00:0c:6e:d8:24:6c. >SCSI subsystem driver Revision:1.00 >scsi0 : SCSI host adapter emulation for IDE ATAPIdevices >Intel 810 + AC97 Audio, version 1.01, 17:06:52 May 162005 >i810: SiS 7012 found at IO 0xa000 and 0xa400, MEM 0x0000 and0x0000, >IRQ 3 >i810_audio: Audio Controller supports 6channels. >i810_audio: Defaulting to base 2 channelmode. >i810_audio: Resetting connection 0 >ac97_codec: AC97Audio codec, id: ADS112 (Unknown) >i810_audio: AC'97 codec 0 supportsAMAP, total channels = 6 >usb.c: registered new driverusbdevfs >usb.c: registered new driver hub >usb-ohci.c: USB OHCIat membase 0xf8882000, IRQ 9 >usb-ohci.c: usb-00:03.0, SiliconIntegrated Systems [SiS] USB 1.0 >Controller >usb.c: new USBbus registered, assigned bus number 1 >hub.c: USB hubfound >hub.c: 3 ports detected >usb-ohci.c: USB OHCI at membase0xf8911000, IRQ 9 >usb-ohci.c: usb-00:03.1, Silicon Integrated Systems[SiS] USB 1.0 >Controller (#2) >usb.c: new USB bus registered,assigned bus number 2 >hub.c: USB hub found >hub.c: 3 portsdetected >hub.c: new USB device 00:03.0-1, assigned address2 >usb.c: USB device 2 (vend/prod 0x3f0/0x1204) is not claimed by any >active driver. >ohci1394: $Rev: 1045 $ Ben Collins<bcollins@debian.org> >ohci1394_0: Unexpected PCI resourcelength of 1000! >ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[10]MMIO=[e4800000-e48007ff] >Max Packet=[2048] >ehci_hcd 00:03.3:Silicon Integrated Systems [SiS] USB 2.0 >Controller >ehci_hcd00:03.3: irq 9, pci mem f8952000 >usb.c: new USB bus registered,assigned bus number 3 >PCI: cache line size of 128 is not supported bydevice 00:03.3 >ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver2003-Dec-29/2.4 >hub.c: USB hub found >hub.c: 6 portsdetected >ieee1394: Host added: ID:BUS[0-00:1023]GUID[00004c0107002bef] >pci_hotplug: PCI Hot Plug PCI Core version:0.5 >shpchp: acpi_shpchprm:get_device PCI ROOT HIDfail=0x1001 >pci_hotplug: PCI Hot Plug PCI Core version:0.5 >pciehp: acpi_pciehprm:get_device PCI ROOT HIDfail=0x1001 >usb.c: error getting string descriptor 0(error=-110) >usb.c: error getting string descriptor 0(error=-110) >usb.c: error getting string descriptor 0(error=-110) >hub.c: connect-debounce failed, port 3disabled >hub.c: new USB device 00:03.3-5, assigned address2 >usb.c: USB device 2 (vend/prod 0xea0/0x2168) is not claimed by any >active driver. >usb.c: USB disconnect on device 00:03.0-1address 2 >hub.c: new USB device 00:03.0-1, assigned address3 >usb.c: USB device 3 (vend/prod 0x3f0/0x1204) is not claimed by any >active driver. >usb.c: registered new driverusblp >printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1proto >2 vid 0x03F0 pid 0x1204 >printer.c: v0.13: USB PrinterDevice Class driver >Initializing USB Mass Storagedriver... >usb.c: registered new driver usb-storage >scsi1 :SCSI emulation for USB Mass Storage devices > Vendor: GenericModel: USB Flash Disk Rev: 2.00 > Type: Direct-AccessANSI SCSI revision: 02 >WARNING: USB Mass Storage dataintegrity not assured >USB Mass Storage device found at 2 >USBMass Storage support registered. >apm: BIOS version 1.2 Flags 0x03(Driver version 1.16) >jopa@debian:~$ > >>>>>>>>>> Será que alguém me podeajudar?? > >Cumprimentos >AbreuPires > > >-- >To UNSUBSCRIBE, email to >debian-user-portuguese-REQUEST@lists.debian.org >with asubject of "unsubscribe". Trouble? Contact >listmaster@lists.debian.org > </BLOCKQUOTE>

Reply to:

References:
- Estou quase a desistir do Sarge
 - From: jopa <jopa@netcabo.pt>

Prev by Date: Re: lotus notes
Next by Date: Locales
Previous by thread: Estou quase a desistir do Sarge
Next by thread: Re: Estou quase a desistir do Sarge
Index(es):
- Date
- Thread