não tenho som do FC3 depois de actualizar o kernel
Bom dia,
Actualizei o kernel no FC3 e deixei de ter som.
Já tentei executar os comandos alsamixer e outros, mas nada.
Ao executar o Selector de Sistemas de Multimedia verifico que só
funciona o ESD.
Como faço para ter som no FC3?
No final do dmesg diz:
*application sox uses obsolete OSS audio interface*
Publico aqui o dmesg:
[jopa@localhost ~]$ dmesg
Linux version 2.6.11-1.35_FC3 (bhcompile@bugs.build.redhat.com) (gcc
version 3.4 .3 20050227 (Red Hat 3.4.3-22)) #1 Mon Jun 13 00:52:08 EDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ef40000 (usable)
BIOS-e820: 000000001ef40000 - 000000001ef50000 (ACPI data)
BIOS-e820: 000000001ef50000 - 000000001f000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
495MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 126784
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 122688 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 TOSHIB ) @ 0x000f0180
ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef40000
ACPI: FADT (v002 TOSHIB 750 0x20030101 TASM 0x04010000) @ 0x1ef40060
ACPI: SSDT (v001 TOSHIB A000C 0x20030917 MSFT 0x0100000e) @ 0x1ef402ca
ACPI: DBGP (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef400e4
ACPI: BOOT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef40038
ACPI: MADT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef40118
ACPI: DSDT (v001 TOSHIB A000C 0x20031216 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0xd808
Allocating PCI resources starting at 1f000000 (gap: 1f000000:dfc00000) Built
1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet Initializing
CPU#0 CPU 0 irqstacks, hard=c043a000 soft=c0439000 PID hash table entries:
2048 (order: 11, 32768 bytes) Detected 2793.225 MHz processor. Using pmtmr
for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache
hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 497568k/507136k available (2419k kernel code, 8948k reserved,
677k data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5537.79 BogoMIPS (lpj=2768896) Security Framework
v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary Mount-cache hash table entries: 512
(order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00004400 0 0000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400
0000000 0 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0e00)
checking if image is initramfs... it is
Freeing initrd memory: 395k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd2fe, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
Simple Boot Flag at 0x7c set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1120295635.643:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 8A4C334EE51D1D71
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [THRM] (24 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Maximum main memory to use for agp memory: 424M
agpgart: Detected 16252K stolen memory.
agpgart: AGP aperture is 128M @ 0xd8000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11 io
scheduler noop registered io scheduler anticipatory registered io scheduler
deadline registered io scheduler cfq registered RAMDISK driver initialized:
16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE
driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio Probing
IDE interface ide0...
hda: IC25N040ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: UJDA750 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63,
UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM
driver Revision: 3.20 ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
ALPS Touchpad (Glidepoint) detected
Disabling hardware tapping
input: AlpsPS/2 ALPS TouchPad on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind
hash table entries: 16384 (order: 6, 458752 bytes)
TCP: Hash tables configured (established 16384 bind 16384) Initializing
IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
VIY0 USB1 USB2 USB4 AMDM LID PWRB
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 176k freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 343 types, 30 bools
security: 55 classes, 14891 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for
labelin g
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses
genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts Floppy
drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0xcffff000, irq 11, MAC addr 00:08:0D:61:BB:D5
PCI: Enabling device 0000:00:1f.5 (0000 -> 0003)
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49391 usecs
intel8x0: clocking to 48000
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
hw_random: RNG not detected
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd
0000:00:1d.7: irq 11, pci mem 0x1f080000 ehci_hcd 0000:00:1d.7: new USB bus
registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd
0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub
1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host
Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd
0000:00:1d.0: irq 10, io base 0xcfe0 uhci_hcd 0000:00:1d.0: new USB bus
registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2
ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd
0000:00:1d.1: irq 11, io base 0xcf80 uhci_hcd 0000:00:1d.1: new USB bus
registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2
ports detected Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Enabling device 0000:01:0b.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:01:0b.0 [1179:0001]
Yenta: ISA IRQ mask 0x00b8, PCI irq 11
Socket status: 30000007
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03cc360(lo)
IPv6 over IPv4 tunneling driver
ACPI: AC Adapter [ADP1] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ibm_acpi: ec object not found
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no) EXT3 FS on
hda2, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding
610460k swap on /dev/hda3. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
genfs_contexts
pnp: Device 00:08 activated.
parport: PnPBIOS parport detected.
pnp: Device 00:08 disabled.
ieee1394: Initialized config rom entry `ip1394'
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (3962 buckets, 31696 max) - 272 bytes per conntrack
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x1e0-0x1e7 0x4d0-0x4d7
cs: IO port probe 0xa00-0xaff: clean.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
pnp: Device 00:08 activated.
parport: PnPBIOS parport detected.
pnp: Device 00:08 disabled.
lp: driver loaded but no devices found
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 10 (level, low) -> IRQ 10 [drm]
Initialized i915 1.1.0 20040405 on minor 0:
PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
[drm] Initialized i915 1.1.0 20040405 on minor 1:
mtrr: base(0xd8020000) is not aligned on a size(0x300000) boundary
*application sox uses obsolete OSS audio interface
*e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
eth0: no IPv6 routers present
[jopa@localhost ~]$
Com os cumprimentos
Abreu Pires
_________________________________________________________________
Clube Linux – http://www.clubelinux.com
=================================================================
Para cancelar devolva esta mensagem para: cancelar@clubelinux.com
_________________________________________________________________
--
Com os cumprimentos
Abreu Pires
www.favoritus.net
Reply to: