[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: ifup eth0



Luciano muito obrigado pela sua ajuda.
Mais a m,inha plca de som ainda não funciona.
Em baixo segue mais detalhes.

--- Luciano Macedo Rodrigues <sp00ky@brturbo.com>
escreveu: > Juliano
> 
> Manda mais duas linhas:
> 
> # dmesg | grep eth0

este comando não responde nada.

> 
> Vai dizer se sua eth0 foi achada pelo kernel e etc
> 
> # cat /etc/modules

embaixo segue a resposta deste comando.

> 
> Pra ver quais modulos o Debian ta carregando.
> 
> Para esta placa existem dois modulos: o 8139cp e o
> 8139too. Teste ambos 
> usando o modprobe em um terminal:
> 
> # modprobe 8139cp
> # modprobe 8139too

não testei pois já esta carregado.( creio eu )

> 
> O que funcionar, voce inclui no /etc/modules, ou usa
> o modconf.
> 
> # modconf

entrei nele e verifiquei q já estava instalado o
modulo.

> 
> O resto dos seus arquivos deixe como está.
> 
> Luciano Macedo Rodrigues
> sp00ky - debian unstable but stable
> 
> 
> Juliano Davel Torres wrote:
> 
> >Oi, 
> >Tenho uma placa de rede rtl8139(realtec) e não to
> >conseguindo faze-la funcionar. Ela funcionava
> >perfeitamente. A ultima coisa q fiz foi atualizado
> o
> >debian e instalar o mysql-server. Pois preciso
> >instalar o servidor.
> >Utilizo uo debian sid com kernel 2.6.6.
> >
> >  
> >
>  

analigia:~# ifup -a
ifup: interface lo already configured
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet
Software Consortium.
All rights reserved.

Please contribute if you find this software useful.
For info, please visit
http://www.isc.org/dhcp-contrib.html

sit0: unknown hardware address type 776
eth0: ERROR while getting interface flags: No such
device
sit0: unknown hardware address type 776
Bind socket to interface: No such device
exiting.
Failed to bring up eth0.
analigia:~#
--------------------------------------------------------------
analigia:~# cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules
that are
# to be loaded at boot time, one per line.  Comments
begin with
# a "#", and everything on the line after them are
ignored.

ide-cd
ide-detect
ntfs
lp
nvidia-agp
psmouse
xtkbd
mousedev
8139cp
decnet
usbcore
analigia:~#
--------------------------------------------------------------
analigia:~# cat /etc/network/interfaces
auto lo
iface lo inet loopback

# This entry was created during the Debian
installation
auto eth0
iface eth0 inet dhcp
analigia:~#
--------------------------------------------------------------
analigia:~# uname -a
Linux analigia 2.6.6-1-686 #1 Wed May 12 14:57:57 EST
2004 i686 GNU/Linux
analigia:~#
---------------------------------------------------------------
analigia:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 82850 850
(Tehama) Chipset Host Bridge (MCH) (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 82850 850
(Tehama) Chipset AGP Bridge (rev 04)
0000:00:1e.0 PCI bridge: Intel Corp.
82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev
04)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA
Bridge (LPC) (rev 04)
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE
U100 (rev 04)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM
USB (Hub #1) (rev 04)
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev
04)
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM
USB (Hub #2) (rev 04)
0000:00:1f.5 Multimedia audio controller: Intel Corp.
82801BA/BAM AC'97 Audio (rev 04)
0000:01:00.0 VGA compatible controller: nVidia
Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] (rev
b2)
0000:02:0a.0 Ethernet controller: Realtek
Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:02:0b.0 Communication controller: Motorola:
Unknown device 5608
analigia:~#
--------------------------------------------------------------------------------------------------


______________________________________________________________________

Yahoo! Mail - agora com 100MB de espaço, anti-spam e antivírus grátis!
http://br.info.mail.yahoo.com/



Reply to: