Re: [Fwd: Problemas com o X ...] (com os arquivos anexados)
Olá,
a saída do dmesg está em anexo ... na parte do agpgart aparece:
agpgart: Maximum main memory to use for agp memory: 93M
agpgart: Detected an Intel i810 E Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
Edson, está bem parecido com o seu ... exceto a quantidade de memória ... e aí ??
Fernando, com isto imagino que módulo esteja instalado, certo ??
Um abraço,
Nivaldo
"Edson Y. Fugio" wrote:
> Nivaldo Antônio Portela de Vasconcelos wrote:
> > logo quando comecei usar linux (Debian) usava o wvdial como programa de conexão
> > ppp ... eu só conseguia usar como root por conta das permissões de dispositivos,
> > arquivos e programas... aí, tentei como root mudar as permissões ... funcionava
> > ... quando eu rebootava a máquina ... as permissões tinham sido repostas ...
> > parece que existe um processo de inicialização de permissões pradrão de pocote
> > ou coisa parecida no momento de boot ...
> >
> > Considerando que consegui usar o X uma vez ... e quando rebootei nãi mais ...
> > imagino algo parecido com aquela inicialização .... não de permissões pq. estou
> > tentando como root .... é só uma idéia de desesperado !!
>
> Aquele erro é do driver agpgart, veja se o dmesg retorna isto:
> agpgart: Maximum main memory to use for agp memory: 93M
> agpgart: Detected an Intel i810 DC100 Chipset.
> agpgart: detected 4MB dedicated video ram.
> agpgart: AGP aperture is 64M @ 0xf8000000
>
> Se não tiver nada parecido use "modprobe agpgart".
> Quanto ao seu problema de permissões o correto é vc incluir seu login
> nos grupos corretos, eu incluo o meu no dialout, lp, audio, dip; e
> consigo usar o pon sem ser root.
>
> []'s
> Edson
Linux version 2.2.18 (herbert@arnor) (gcc version 2.7.2.3) #1 Thu Dec 21 21:13:10 EST 2000
Detected 735014 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1468.00 BogoMIPS
Memory: 125996k/129920k available (1728k kernel code, 412k reserved, 1632k data, 152k init)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
256K L2 cache (8 way)
CPU: L2 Cache: 256K
CPU: Intel Pentium III (Coppermine) stepping 06
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfd7ec
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=2411
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:pio, hdd:pio
hda: Maxtor 31024H1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: Maxtor 31024H1, 9641MB w/2048kB Cache, CHS=1229/255/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: Version 3.2
IBM MCA SCSI: No Microchannel-bus present --> Aborting.
This machine does not have any IBM MCA-bus
or the MCA-Kernel-support is not enabled!
megaraid: v1.11 (Aug 23, 2000)
aec671x_detect:
3w-xxxx: tw_findcards(): No cards found.
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 152k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 130748k swap-space (priority -1)
IPv4 over IPv4 tunneling driver
parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPEPP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
parport_probe: failed
parport0: no IEEE-1284 device present.
lp0: using parport0 (polling).
NET4: Linux IPX 0.38 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eepro100.c: VA Linux custom, Dragan Stancevic <visitor@valinux.com> 2000/11/15
eth0: OEM i82557/i82558 10/100 Ethernet, 00:06:29:F7:9B:4F, IRQ 5.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 729857-005, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 93M
agpgart: Detected an Intel i810 E Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
Reply to: