[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: WIFIonICE funktioniert nicht mehr



Am 25.06.22 um 08:11 schrieb Marc Haber:
On Fri, 24 Jun 2022 22:19:30 +0200, Jürgen Bausa
<Juergen.bausa@online.de> wrote:
Ich bin diese Woche mit dem ICE gefahren und musste feststellen, dass
ich mich mit meinem Laptop (Xiaomi Air 12 unter Bullseye AMD64 mit
NetworkManager, Intel Corporation Wireless 8260 (rev 3a)) nicht ins ICE-
wlan einloggen kann, obwohl wlan mit allen anderen Access Points
einwandfrei läuft. Es hatte früher auch im ICE immer geklappt (zuletzt
Anfang Mai). Auch diesmal hatten andere Geräte und Betriebssysteme
(Android, MacOS, Windows, ...) keine Probleme. Es ging sogar mit meinem
Laptop, nachdem ich die Recue-partition (puppy linux) gebootet hatte.

Was für ein ICE war das? Ich habe mit meinem Lenovo-Notebook unter
Linux ein Problem im ICE 4, da funktioniert es reproduzierbar in
keinem Zug.

Das weiß ich leider nicht genau. Wenn ich mir Bilder im Internet ansehe würde ich sagen, es war ein ICE 1 oder 2. ich nehme an, es gibt keine Möglichkeit das im nachhinein zu überprüfen.


Kann ich mal ein lspci -nn von Deinem Notebook sehen?


Klar.
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:590c] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 615 [8086:591e] (rev 02) 00:04.0 Signal processing controller [1180]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [8086:1903] (rev 02) 00:08.0 System peripheral [0880]: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model [8086:1911] 00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) 00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21) 00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21) 00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21) 00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 [8086:9d18] (rev f1) 00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d56] (rev 21) 00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21) 00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d71] (rev 21) 00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21) 01:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a)

Inzwischen habe ich beim googeln ein paar Hinweise zu dem Fehler
(Reason: 2=PREV_AUTH_NOT_VALID) gefunden. An einer Stelle heißt es, es
sei ein Fehler in einem neueren Kernel. Das könnte erklären, warum es
Anfang Mai noch ging. Da war ein Kernel update dazwischen.
Hab ich blöderweise nicht im Zug dran gedacht. Ansonsten hätte ich
einfach mal den älteren Kernel gebootet.

Jürgen


Reply to: