Re: Probleme seit upgrade auf stretch
Am 19.07.2018 um 12:37 schrieb Michael Lange:
Hallo,
On Thu, 19 Jul 2018 11:22:23 +0200
Dirk Paul Finkeldey <dirk.finkeldey@ewetel.net> wrote:
Hallo,
Möchte mich schon mal dafür Entschuldigen das ich genervt bin.
Habe Netbook mit N270 CPU von whezzy über jessie nach stretch
aktualisiert.
Der XFCE Power Manager ist unbenutzbar, man kann keine Einstellungen
mehr vornehmen siehe Anhang.
Die CPU wird auf 800 - 1067 Mhz gehalten, ich weiß nicht welcher dienst
das warum macht, wie soll man mit so etwas arbeiten ?
Ich weiss zwar nicht woran das liegt, meinem Bauchgefühl nach könnte das
aber zusammen hängen. Gibt es evtl. Meldungen in der Ausgabe von dmesg
bzw. im syslog, die da weiterhelfen könnten? Irgend ein Treiberproblem?
# dmesg (der Bereich in dem dauernd suspendiert wird)
[ 75.896993] PM: Syncing filesystems ... done.
[ 99.176669] PM: Preparing system for sleep (mem)
[ 99.176921] Freezing user space processes ... (elapsed 0.127 seconds)
done.
[ 99.304771] Freezing remaining freezable tasks ... (elapsed 0.001
seconds) done.
[ 99.306608] PM: Suspending system (mem)
[ 99.306701] Suspending console(s) (use no_console_suspend to debug)
[ 99.308111] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 99.452504] sd 0:0:0:0: [sda] Stopping disk
[ 100.140455] PM: suspend of devices complete after 833.350 msecs
[ 100.160166] PM: late suspend of devices complete after 19.689 msecs
[ 100.161554] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
[ 100.161560] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 100.161757] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[ 100.161873] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 100.161999] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 100.180371] PM: noirq suspend of devices complete after 20.188 msecs
[ 100.180438] ACPI: Preparing to enter system sleep state S3
[ 100.181257] ACPI : EC: event blocked
[ 100.181260] ACPI : EC: EC stopped
[ 100.181263] PM: Saving platform NVS memory
[ 100.181964] Disabling non-boot CPUs ...
[ 100.182555] Broke affinity for irq 1
[ 100.182574] Broke affinity for irq 9
[ 100.182584] Broke affinity for irq 12
[ 100.182595] Broke affinity for irq 14
[ 100.182610] Broke affinity for irq 16
[ 100.182632] Broke affinity for irq 23
[ 100.183867] smpboot: CPU 1 is now offline
[ 100.194204] ACPI: Low-level resume complete
[ 100.194204] ACPI : EC: EC started
[ 100.194204] PM: Restoring platform NVS memory
[ 100.194204] Force enabled HPET at resume
[ 100.194204] Suspended for 4.220 seconds
[ 100.194204] microcode: microcode updated early to revision 0x218,
date = 2009-04-10
[ 100.199360] Enabling non-boot CPUs ...
[ 100.208627] x86: Booting SMP configuration:
[ 100.208630] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 100.183730] Initializing CPU#1
[ 100.183730] Disabled fast string operations
[ 100.209044] cache: parent cpu1 should not be sleeping
[ 100.224367] CPU1 is up
[ 100.224876] ACPI: Waking up from system sleep state S3
[ 100.226834] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 100.226889] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 100.226950] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[ 100.227013] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
[ 100.244275] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 100.244564] PM: noirq resume of devices complete after 18.289 msecs
[ 100.245091] PM: early resume of devices complete after 0.471 msecs
[ 100.245252] ACPI : EC: event unblocked
[ 100.245448] ACPI : button: The lid device is not compliant to SW_LID.
[ 100.246044] usb usb2: root hub lost power or was reset
[ 100.246099] usb usb3: root hub lost power or was reset
[ 100.246151] usb usb4: root hub lost power or was reset
[ 100.246203] usb usb5: root hub lost power or was reset
[ 100.247167] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 100.266771] sd 0:0:0:0: [sda] Starting disk
[ 100.572332] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 100.723143] ieee80211 phy0: RTL8225-SE version not-D
[ 100.732087] usb 2-2: reset low-speed USB device number 2 using uhci_hcd
[ 101.122258] ieee80211 phy0: NO Xtal cal
[ 101.215129] PM: resume of devices complete after 970.025 msecs
[ 101.217209] PM: Finishing wakeup.
[ 101.217214] Restarting tasks ... done.
[ 101.848318] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES)
filtered out
[ 101.848329] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES)
filtered out
[ 101.848518] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE
MODE) succeeded
[ 101.894227] ata1.00: configured for UDMA/133
[ 103.637130] PM: Syncing filesystems ... done.
[ 105.880856] PM: Preparing system for sleep (mem)
[ 105.881122] Freezing user space processes ... (elapsed 0.169 seconds)
done.
[ 106.051089] Freezing remaining freezable tasks ... (elapsed 0.001
seconds) done.
[ 106.052266] PM: Suspending system (mem)
[ 106.052362] Suspending console(s) (use no_console_suspend to debug)
[ 106.593163] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 106.594099] sd 0:0:0:0: [sda] Stopping disk
[ 107.020150] PM: suspend of devices complete after 967.370 msecs
[ 107.040320] PM: late suspend of devices complete after 20.147 msecs
[ 107.041565] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 107.041705] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
[ 107.041824] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[ 107.041940] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 107.042056] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 107.060346] PM: noirq suspend of devices complete after 20.010 msecs
[ 107.060414] ACPI: Preparing to enter system sleep state S3
[ 107.061229] ACPI : EC: event blocked
[ 107.061232] ACPI : EC: EC stopped
[ 107.061235] PM: Saving platform NVS memory
[ 107.061919] Disabling non-boot CPUs ...
[ 107.062517] Broke affinity for irq 1
[ 107.062537] Broke affinity for irq 9
[ 107.062547] Broke affinity for irq 12
[ 107.062558] Broke affinity for irq 14
[ 107.062573] Broke affinity for irq 16
[ 107.062594] Broke affinity for irq 23
[ 107.063819] smpboot: CPU 1 is now offline
[ 107.074219] ACPI: Low-level resume complete
[ 107.074219] ACPI : EC: EC started
[ 107.074219] PM: Restoring platform NVS memory
[ 107.074219] Force enabled HPET at resume
[ 107.074219] Suspended for 4.119 seconds
[ 107.079369] Enabling non-boot CPUs ...
[ 107.088625] x86: Booting SMP configuration:
[ 107.088627] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 107.063693] Initializing CPU#1
[ 107.063693] Disabled fast string operations
[ 107.089064] cache: parent cpu1 should not be sleeping
[ 107.104382] CPU1 is up
[ 107.104893] ACPI: Waking up from system sleep state S3
[ 107.106873] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 107.106931] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 107.106992] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[ 107.107058] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
[ 107.124394] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 107.124598] PM: noirq resume of devices complete after 18.307 msecs
[ 107.125087] PM: early resume of devices complete after 0.441 msecs
[ 107.125227] ACPI : EC: event unblocked
[ 107.131003] usb usb3: root hub lost power or was reset
[ 107.131005] usb usb2: root hub lost power or was reset
[ 107.131077] usb usb4: root hub lost power or was reset
[ 107.131080] usb usb5: root hub lost power or was reset
[ 107.131348] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 107.137310] sd 0:0:0:0: [sda] Starting disk
[ 107.452142] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 107.660156] usb 2-2: reset low-speed USB device number 2 using uhci_hcd
[ 108.184378] PM: resume of devices complete after 1059.278 msecs
[ 108.185338] PM: Finishing wakeup.
[ 108.185343] Restarting tasks ... done.
[ 109.080347] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES)
filtered out
[ 109.080359] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES)
filtered out
[ 109.080528] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE
MODE) succeeded
[ 109.110224] ata1.00: configured for UDMA/133
[ 119.358816] NET: Registered protocol family 4
[ 119.413762] NET: Registered protocol family 3
[ 119.471207] NET: Registered protocol family 5
[ 134.374542] PM: Syncing filesystems ...
[ 160.744140] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 160.744425] ata1.00: failed command: READ DMA
[ 160.744607] ata1.00: cmd c8/00:00:80:09:e3/00:00:00:00:00/e4 tag 0
dma 131072 in
res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask
0x4 (timeout)
[ 160.745135] ata1.00: status: { DRDY }
[ 165.784129] ata1: link is slow to respond, please be patient (ready=0)
[ 170.764131] ata1: device not ready (errno=-16), forcing hardreset
[ 170.764159] ata1: soft resetting link
[ 171.070188] ata1.00: configured for UDMA/133
[ 171.070239] ata1: EH complete
[ 177.579108] done.
[ 177.579122] PM: Preparing system for sleep (mem)
[ 177.579385] Freezing user space processes ... (elapsed 0.098 seconds)
done.
[ 177.677848] Freezing remaining freezable tasks ... (elapsed 0.001
seconds) done.
[ 177.679507] PM: Suspending system (mem)
[ 177.679608] Suspending console(s) (use no_console_suspend to debug)
[ 177.680734] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 177.713842] sd 0:0:0:0: [sda] Stopping disk
[ 178.512287] PM: suspend of devices complete after 832.180 msecs
[ 178.532161] PM: late suspend of devices complete after 19.850 msecs
[ 178.533479] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 178.533736] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
[ 178.533861] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[ 178.533978] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 178.534104] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 178.552333] PM: noirq suspend of devices complete after 20.156 msecs
[ 178.552400] ACPI: Preparing to enter system sleep state S3
[ 178.553220] ACPI : EC: event blocked
[ 178.553223] ACPI : EC: EC stopped
[ 178.553226] PM: Saving platform NVS memory
[ 178.553896] Disabling non-boot CPUs ...
[ 178.554481] Broke affinity for irq 1
[ 178.554500] Broke affinity for irq 9
[ 178.554511] Broke affinity for irq 12
[ 178.554521] Broke affinity for irq 14
[ 178.554536] Broke affinity for irq 16
[ 178.554558] Broke affinity for irq 23
[ 178.555785] smpboot: CPU 1 is now offline
[ 178.566257] ACPI: Low-level resume complete
[ 178.566257] ACPI : EC: EC started
[ 178.566257] PM: Restoring platform NVS memory
[ 178.566257] Force enabled HPET at resume
[ 178.566257] Suspended for 3.507 seconds
[ 178.571409] Enabling non-boot CPUs ...
[ 178.580636] x86: Booting SMP configuration:
[ 178.580638] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 178.555658] Initializing CPU#1
[ 178.555658] Disabled fast string operations
[ 178.581089] cache: parent cpu1 should not be sleeping
[ 178.596382] CPU1 is up
[ 178.596898] ACPI: Waking up from system sleep state S3
[ 178.598879] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 178.598935] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 178.598996] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[ 178.599061] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
[ 178.616268] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 178.616511] PM: noirq resume of devices complete after 18.216 msecs
[ 178.617019] PM: early resume of devices complete after 0.459 msecs
[ 178.617160] ACPI : EC: event unblocked
[ 178.620313] usb usb2: root hub lost power or was reset
[ 178.620377] usb usb3: root hub lost power or was reset
[ 178.620448] usb usb4: root hub lost power or was reset
[ 178.620519] usb usb5: root hub lost power or was reset
[ 178.620785] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 178.625457] i8042: failed to resume active multiplexor, mouse won't work
[ 178.626755] sd 0:0:0:0: [sda] Starting disk
[ 178.876304] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 179.104102] usb 2-2: reset low-speed USB device number 2 using uhci_hcd
[ 179.463724] PM: resume of devices complete after 846.693 msecs
[ 179.464601] PM: Finishing wakeup.
[ 179.464607] Restarting tasks ... done.
[ 180.244347] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES)
filtered out
[ 180.244364] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES)
filtered out
[ 180.244544] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE
MODE) succeeded
[ 180.290261] ata1.00: configured for UDMA/133
[ 182.492574] PM: Syncing filesystems ... done.
[ 184.084629] PM: Preparing system for sleep (mem)
[ 184.084890] Freezing user space processes ... (elapsed 0.232 seconds)
done.
[ 184.317026] Freezing remaining freezable tasks ... (elapsed 0.001
seconds) done.
[ 184.318611] PM: Suspending system (mem)
[ 184.318683] Suspending console(s) (use no_console_suspend to debug)
[ 184.524105] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 184.627708] sd 0:0:0:0: [sda] Stopping disk
[ 185.056359] PM: suspend of devices complete after 737.310 msecs
[ 185.076383] PM: late suspend of devices complete after 20.007 msecs
[ 185.077464] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 185.077671] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
[ 185.077764] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[ 185.077850] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 185.077934] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 185.096274] PM: noirq suspend of devices complete after 19.878 msecs
[ 185.096326] ACPI: Preparing to enter system sleep state S3
[ 185.096954] ACPI : EC: event blocked
[ 185.096957] ACPI : EC: EC stopped
[ 185.096959] PM: Saving platform NVS memory
[ 185.097482] Disabling non-boot CPUs ...
[ 185.097950] Broke affinity for irq 1
[ 185.097965] Broke affinity for irq 9
[ 185.097974] Broke affinity for irq 12
[ 185.097982] Broke affinity for irq 14
[ 185.097995] Broke affinity for irq 16
[ 185.098013] Broke affinity for irq 23
[ 185.099198] smpboot: CPU 1 is now offline
[ 185.109766] ACPI: Low-level resume complete
[ 185.109766] ACPI : EC: EC started
[ 185.109766] PM: Restoring platform NVS memory
[ 185.109766] Force enabled HPET at resume
[ 185.109766] Suspended for 8.456 seconds
[ 185.114914] Enabling non-boot CPUs ...
[ 185.124641] x86: Booting SMP configuration:
[ 185.124644] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 185.099087] Initializing CPU#1
[ 185.099087] Disabled fast string operations
[ 185.125085] cache: parent cpu1 should not be sleeping
[ 185.140381] CPU1 is up
[ 185.140897] ACPI: Waking up from system sleep state S3
[ 185.142877] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 185.142932] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 185.142994] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[ 185.143061] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
[ 185.164149] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 185.164313] PM: noirq resume of devices complete after 22.023 msecs
[ 185.164838] PM: early resume of devices complete after 0.448 msecs
[ 185.164980] ACPI : EC: event unblocked
[ 185.168333] usb usb2: root hub lost power or was reset
[ 185.168393] usb usb3: root hub lost power or was reset
[ 185.168451] usb usb4: root hub lost power or was reset
[ 185.168507] usb usb5: root hub lost power or was reset
[ 185.170011] sd 0:0:0:0: [sda] Starting disk
[ 185.170780] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 185.424299] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 185.652087] usb 2-2: reset low-speed USB device number 2 using uhci_hcd
[ 186.011912] PM: resume of devices complete after 847.062 msecs
[ 186.013676] PM: Finishing wakeup.
[ 186.013680] Restarting tasks ... done.
[ 186.988923] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES)
filtered out
[ 186.988938] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES)
filtered out
[ 186.989121] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE
MODE) succeeded
[ 187.175221] ata1.00: configured for UDMA/133
[ 188.453577] input: PS/2 Generic Mouse as
/devices/platform/i8042/serio2/input/input65
[ 196.005837] vboxdrv: loading out-of-tree module taints kernel.
[ 196.127726] vboxdrv: Found 2 processor cores
[ 196.144451] vboxdrv: fAsync=0 offMin=0x348 offMax=0xf30
[ 196.253421] vboxdrv: TSC mode is Synchronous, tentative frequency
1595999920 Hz
[ 196.253428] vboxdrv: Successfully loaded version 5.2.10_Debian
(interface 0x00290001)
[ 196.430605] VBoxNetFlt: Successfully started.
[ 197.674310] VBoxNetAdp: Successfully started.
[ 197.898648] VBoxPciLinuxInit
[ 198.123366] vboxpci: IOMMU not found (not compiled)
[ 211.941881] perf: interrupt took too long (2515 > 2500), lowering
kernel.perf_event_max_sample_rate to 79500
[ 212.999596] PM: Syncing filesystems ...
[ 214.958244] fuse init (API version 7.26)
[ 215.076926] done.
[ 215.076939] PM: Preparing system for sleep (mem)
[ 215.077201] Freezing user space processes ... (elapsed 0.120 seconds)
done.
[ 215.197262] Freezing remaining freezable tasks ... (elapsed 0.001
seconds) done.
[ 215.199033] PM: Suspending system (mem)
[ 215.199115] Suspending console(s) (use no_console_suspend to debug)
[ 215.218450] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 216.041547] sd 0:0:0:0: [sda] Stopping disk
[ 216.476139] PM: suspend of devices complete after 1276.686 msecs
[ 216.496144] PM: late suspend of devices complete after 19.988 msecs
[ 216.497230] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
[ 216.497234] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 216.497388] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[ 216.497476] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 216.497572] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 216.516295] PM: noirq suspend of devices complete after 20.138 msecs
[ 216.516348] ACPI: Preparing to enter system sleep state S3
[ 216.516978] ACPI : EC: event blocked
[ 216.516981] ACPI : EC: EC stopped
[ 216.516983] PM: Saving platform NVS memory
[ 216.517505] Disabling non-boot CPUs ...
[ 216.518069] Broke affinity for irq 1
[ 216.518085] Broke affinity for irq 9
[ 216.518094] Broke affinity for irq 12
[ 216.518102] Broke affinity for irq 14
[ 216.518114] Broke affinity for irq 16
[ 216.518132] Broke affinity for irq 23
[ 216.519291] smpboot: CPU 1 is now offline
[ 216.529719] ACPI: Low-level resume complete
[ 216.529719] ACPI : EC: EC started
[ 216.529719] PM: Restoring platform NVS memory
[ 216.529719] Force enabled HPET at resume
[ 216.529719] Suspended for 2.580 seconds
[ 216.534865] Enabling non-boot CPUs ...
[ 216.544635] x86: Booting SMP configuration:
[ 216.544638] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 216.519189] Initializing CPU#1
[ 216.519189] Disabled fast string operations
[ 216.545060] cache: parent cpu1 should not be sleeping
[ 216.560374] CPU1 is up
[ 216.560887] ACPI: Waking up from system sleep state S3
[ 216.562871] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 216.562927] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 216.562988] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[ 216.563053] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
[ 216.580461] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 216.580625] PM: noirq resume of devices complete after 18.338 msecs
[ 216.581114] PM: early resume of devices complete after 0.441 msecs
[ 216.581255] ACPI : EC: event unblocked
[ 216.584508] usb usb2: root hub lost power or was reset
[ 216.584568] usb usb3: root hub lost power or was reset
[ 216.584626] usb usb4: root hub lost power or was reset
[ 216.584681] usb usb5: root hub lost power or was reset
[ 216.586282] sd 0:0:0:0: [sda] Starting disk
[ 216.587077] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 216.840170] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 217.068094] usb 2-2: reset low-speed USB device number 2 using uhci_hcd
[ 217.428208] PM: resume of devices complete after 847.081 msecs
[ 217.429650] PM: Finishing wakeup.
[ 217.429655] Restarting tasks ... done.
Bis das X-System gestartet und usr Angemeldet ist, wird dauernd ein
suspend ausgelöst - warum auch immer ?
S.o., was sagt das syslog kurz bevor der suspend ausgelöst wird?
# less /var/log/syslog|grep suspend
Jul 19 09:08:35 Debian-N270 kernel: [ 69.138319] Suspending console(s)
(use no_console_suspend to debug)
Jul 19 09:08:35 Debian-N270 kernel: [ 69.980449] PM: suspend of
devices complete after 841.802 msecs
Jul 19 09:08:35 Debian-N270 kernel: [ 70.000379] PM: late suspend of
devices complete after 19.912 msecs
Jul 19 09:08:35 Debian-N270 kernel: [ 70.020274] PM: noirq suspend of
devices complete after 19.882 msecs
Jul 19 09:08:36 Debian-N270 systemd[1]: suspend.target: Unit is bound to
inactive unit systemd-suspend.service. Stopping, too.
Jul 19 09:08:49 Debian-N270 kernel: [ 78.327900] Suspending console(s)
(use no_console_suspend to debug)
Jul 19 09:08:49 Debian-N270 kernel: [ 79.316126] PM: suspend of
devices complete after 987.800 msecs
Jul 19 09:08:49 Debian-N270 kernel: [ 79.336126] PM: late suspend of
devices complete after 19.983 msecs
Jul 19 09:08:49 Debian-N270 kernel: [ 79.356276] PM: noirq suspend of
devices complete after 20.137 msecs
Jul 19 09:08:50 Debian-N270 systemd[1]: suspend.target: Unit is bound to
inactive unit systemd-suspend.service. Stopping, too.
Jul 19 09:09:32 Debian-N270 kernel: [ 116.876189] Suspending console(s)
(use no_console_suspend to debug)
Jul 19 09:09:32 Debian-N270 kernel: [ 117.844151] PM: suspend of
devices complete after 966.244 msecs
Jul 19 09:09:32 Debian-N270 kernel: [ 117.864255] PM: late suspend of
devices complete after 20.083 msecs
Jul 19 09:09:32 Debian-N270 kernel: [ 117.884320] PM: noirq suspend of
devices complete after 20.049 msecs
Jul 19 09:09:33 Debian-N270 systemd[1]: suspend.target: Unit is bound to
inactive unit systemd-suspend.service. Stopping, too.
Jul 19 09:10:36 Debian-N270 kernel: [ 177.272965] Suspending console(s)
(use no_console_suspend to debug)
Jul 19 09:10:36 Debian-N270 kernel: [ 178.268156] PM: suspend of
devices complete after 994.782 msecs
Jul 19 09:10:36 Debian-N270 kernel: [ 178.288318] PM: late suspend of
devices complete after 20.142 msecs
Jul 19 09:10:36 Debian-N270 kernel: [ 178.308320] PM: noirq suspend of
devices complete after 19.983 msecs
Jul 19 09:10:38 Debian-N270 systemd[1]: suspend.target: Unit is bound to
inactive unit systemd-suspend.service. Stopping, too.
Jul 19 09:10:48 Debian-N270 kernel: [ 185.414609] Suspending console(s)
(use no_console_suspend to debug)
Jul 19 09:10:48 Debian-N270 kernel: [ 186.424327] PM: suspend of
devices complete after 1009.303 msecs
Jul 19 09:10:48 Debian-N270 kernel: [ 186.444343] PM: late suspend of
devices complete after 19.996 msecs
Jul 19 09:10:48 Debian-N270 kernel: [ 186.464356] PM: noirq suspend of
devices complete after 19.997 msecs
Jul 19 09:10:50 Debian-N270 systemd[1]: suspend.target: Unit is bound to
inactive unit systemd-suspend.service. Stopping, too.
Jul 19 09:11:42 Debian-N270 kernel: [ 235.582274] Suspending console(s)
(use no_console_suspend to debug)
Jul 19 09:11:42 Debian-N270 kernel: [ 236.544151] PM: suspend of
devices complete after 961.462 msecs
Jul 19 09:11:42 Debian-N270 kernel: [ 236.564351] PM: late suspend of
devices complete after 20.180 msecs
Jul 19 09:11:42 Debian-N270 kernel: [ 236.584348] PM: noirq suspend of
devices complete after 19.981 msecs
Jul 19 09:11:44 Debian-N270 systemd[1]: suspend.target: Unit is bound to
inactive unit systemd-suspend.service. Stopping, too.
Das W-lan muss jedes mal aktiviert werden, bis jessie war das nicht
notwendig - wo kann ich diesen quatsch abstellen ?
Wie ist das genau zu verstehen, heisst das du musst jedes mal das Passwort
für deinen Router neu eingeben? Oder wird nur nicht automatisch die
Verbindung hergestellt? Wie verbindest du dich, über das NetworkManager
Applet?
Ich verwende wicd, da muss ich jedes mal wlan einschalten anklicken.
Bisher war wlan immer aktiviert
Gruss
Michael
.-.. .. ...- . .-.. --- -. --. .- -. -.. .--. .-. --- ... .--. . .-.
Insufficient facts always invite danger.
-- Spock, "Space Seed", stardate 3141.9
Reply to: