Re: Deutsche Beschreibungen für Smart Fehlermeldungen
Am 14.08.2015 um 19:52 schrieb Jochen Spieker:
Anton Blau:
Beide Platten funktionieren bisher anstandslos. Ich frage mich aber, ob
diese Meldungen den bevorstehenden "Plattentod" mit Datenverlust ankündigen.
Poste von beiden Platten den Output von 'smartctl -a /dev/sdX'.
Möglichst ohne zusätzliche Zeilenumbrüche. Notfalls als Anhang oder auf
paste.debian.net.
1. Festplatte
meinrechner:~# smartctl -a /dev/sda
sda sda1
backupserver:~# smartctl -a /dev/sda1
smartctl 6.4 2014-10-07 r4002 [i686-linux-3.16.0-4-686-pae] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda LP
Device Model: ST32000542AS
Serial Number: 5XW0RFF3
LU WWN Device Id: 5 000c50 0256b8116
Firmware Version: CC34
User Capacity: 2.000.398.934.016 bytes [2,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5900 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Aug 14 23:43:17 2015 CEST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213915en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 623) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 436) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 087 006 Pre-fail
Always - 142215808
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 205
5 Reallocated_Sector_Ct 0x0033 090 090 036 Pre-fail
Always - 439
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail
Always - 63182299
9 Power_On_Hours 0x0032 063 063 000 Old_age
Always - 33104
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 278
183 Runtime_Bad_Block 0x0032 083 083 000 Old_age
Always - 17
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age
Always - 950
188 Command_Timeout 0x0032 100 097 000 Old_age
Always - 4295032836
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 071 042 045 Old_age Always
In_the_past 29 (0 28 29 27 0)
194 Temperature_Celsius 0x0022 029 058 000 Old_age
Always - 29 (0 17 0 0 0)
195 Hardware_ECC_Recovered 0x001a 051 012 000 Old_age
Always - 142215808
197 Current_Pending_Sector 0x0012 100 095 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 095 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age
Offline - 33725 (62 3 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age
Offline - 2908101997
242 Total_LBAs_Read 0x0000 100 253 000 Old_age
Offline - 945713542
SMART Error Log Version: 1
ATA Error Count: 950 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 950 occurred at disk power-on lifetime: 32904 hours (1371 days + 0
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 03:42:14.456 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 03:42:14.456 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 03:42:14.455 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 03:42:14.455 SET FEATURES [Set transfer
mode]
27 00 00 00 00 00 e0 00 03:42:14.431 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
Error 949 occurred at disk power-on lifetime: 32904 hours (1371 days + 0
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 03:42:10.663 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 03:42:10.663 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 03:42:10.661 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 03:42:10.661 SET FEATURES [Set transfer
mode]
27 00 00 00 00 00 e0 00 03:42:10.661 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
Error 948 occurred at disk power-on lifetime: 32904 hours (1371 days + 0
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 03:42:06.899 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 03:42:06.899 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 03:42:06.897 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 03:42:06.897 SET FEATURES [Set transfer
mode]
27 00 00 00 00 00 e0 00 03:42:06.897 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
Error 947 occurred at disk power-on lifetime: 32904 hours (1371 days + 0
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 03:42:03.155 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 03:42:03.155 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 03:42:03.154 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 03:42:03.154 SET FEATURES [Set transfer
mode]
27 00 00 00 00 00 e0 00 03:42:03.154 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
Error 946 occurred at disk power-on lifetime: 32904 hours (1371 days + 0
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 03:41:59.381 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 03:41:59.381 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 03:41:59.380 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 03:41:59.380 SET FEATURES [Set transfer
mode]
27 00 00 00 00 00 e0 00 03:41:59.379 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 28651 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
2. Festplatte
root@meinrechner2:~# smartctl -a /dev/sdd1
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-61-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda Green (AF)
Device Model: ST2000DL003-9VT166
Serial Number: 6YD06ZY2
LU WWN Device Id: 5 000c50 036710082
Firmware Version: CC32
User Capacity: 2.000.398.934.016 bytes [2,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5900 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Aug 14 23:45:45 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 623) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 342) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x30b7) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail
Always - 164176320
3 Spin_Up_Time 0x0003 093 092 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 132
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail
Always - 190047536
9 Power_On_Hours 0x0032 061 061 000 Old_age
Always - 35034
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 181
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age
Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 013 013 000 Old_age
Always - 87
188 Command_Timeout 0x0032 100 096 000 Old_age
Always - 6
189 High_Fly_Writes 0x003a 090 090 000 Old_age
Always - 10
190 Airflow_Temperature_Cel 0x0022 054 051 045 Old_age
Always - 46 (Min/Max 41/47)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 89
193 Load_Cycle_Count 0x0032 100 100 000 Old_age
Always - 180
194 Temperature_Celsius 0x0022 046 049 000 Old_age
Always - 46 (0 17 0 0 0)
195 Hardware_ECC_Recovered 0x001a 021 004 000 Old_age
Always - 164176320
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 40
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 40
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age
Offline - 215869351299303
241 Total_LBAs_Written 0x0000 100 253 000 Old_age
Offline - 824563832
242 Total_LBAs_Read 0x0000 100 253 000 Old_age
Offline - 1786073016
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 21130 -
# 2 Extended offline Completed without error 00% 41 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: