Am Samstag 27 März 2010 07:42:57 schrieb Til Schubbe: > Hallo, > > ich habe hier ein Motherboard MSI 785G-E53 mit AMD Phenom II X2 550 > und 2 RAM-Riegeln zu je 2 GB. Auf der Platte habe ich mit dem > Net-Installer 504-i386 Debian installiert. Danach erhalte ich beim > booten: > > Booting 'Debian ... kernel 2.6.26-2-686' > [...] > Decompressing Linux... Parsing ELF... done. > Booting the kernel. > [ 0.106235] CPU 0: Machine Check Exception: 0000000000000007 > [ 0.106270] CPU 0: Bank 3: 3400000000000833 at 00000000cff90465 > [ 0.106300] Kernel panic - not syncing: Unable to continue > Dann steht der Rechner. > > Wenn ich mit der Option 'acpi=off' boote, erhalte ich statt dessen: > PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0 > PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0 > PCI: Cannot allocate resource region 9 of bridge 0000:00:06.0 > Und wieder steht der Rechner. > > Wenn ich zusätzlich im BIOS einstelle: > IOAPIC Function: disabled > ACPI Function: disabled > erhalte ich vorher noch die Meldung: > ACPI: Unable to load the System Description Tables > > > Der Net-Installer (Kernel 2.6.26-2-486) sagt zwar auch > ACPI: Unable to load the System Description Tables > PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0 > [...] > bootet aber dann weiter. > > 'lspci -v' mit dem Net-Installer sagt: > [...] > 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI > bridge (PCIE port 1) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: feb00000-febfffff > Prefetchable memory behind bridge: > 00000000fdf00000-00000000fdffffff > Capabilities: [50] Power Management version 3 > Capabilities: [58] Express Root Port (Slot+), MSI 00 > Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable+ > Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] > Device 9601 > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100] Vendor Specific Information <?> > Capabilities: [110] Virtual Channel <?> > Kernel driver in use: pcieport-driver > > 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI > bridge (PCIE port 2) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > Capabilities: [50] Power Management version 3 > Capabilities: [58] Express Root Port (Slot+), MSI 00 > Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable+ > Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] > Device 9601 > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100] Vendor Specific Information <?> > Capabilities: [110] Virtual Channel <?> > Kernel driver in use: pcieport-driver > [...] > > Alle PCI(e)-Slots sind leer. Memtest86 3.3 ist vorher fehlerlos > durchgelaufen. > > > Eine Live-CD mit Ubuntu 9.10. schaltet nach dem Start und einem > Druck auf ENTER in den Textmodus, zeigt einen leeren Bildschirm und > der Rechner steht ebenfalls. > > Knoppix 5.01 mit Kernel 2.6.17 bootet normal. > > > Was muß ich tun, damit der Rechner den Debian-Kernel 2.6.26-2-686 > und Ubuntu bootet? > > TIA + Gruß > Til > Hast du mal einen memtest durchlaufen lassen? Sieht evt. nach defektem RAM aus. Gruß Rene
Attachment:
signature.asc
Description: This is a digitally signed message part.