Auflösung X
Hallo zusammen,
kann mir jemand Hilfestellung geben bei der korrekten Einrichtung meiner
Bildschirmauflösung unter kde.
habe eine Grafikkarte (lspci)
01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850]
und folgenden untenstehenden Montior:
Ich will die Auflösung 2048x1152 im Kde haben, jedoch kann ich nich höher
als 1400 x 1050 auswählen. Im login screen zeigt der Monitor an, dass er
gerade in der 2048er Auflösung betrieben wird.
Wo kann ich das anpassen. xorg.conf auch anbei .
gruss markus
hwinfo --monitor
36: None 00.0: 10002 LCD Monitor
[Created at monitor.95]
Unique ID: rdCR.Yo++45YyP32
Hardware Class: monitor
Model: "SAMSUNG SyncMaster"
Vendor: SAM "SAMSUNG"
Device: eisa 0x041f "SyncMaster"
Serial ID: "H9XS204742"
Resolution: 640x480@60Hz
Resolution: 800x600@56Hz
Resolution: 800x600@60Hz
Resolution: 1024x768@60Hz
Resolution: 1280x1024@60Hz
Resolution: 1280x960@60Hz
Resolution: 2048x1152@60Hz
Size: 510x287 mm
Detailed Timings #0:
Resolution: 2048x1152
Horizontal: 2048 2096 2128 2208 (+48 +80 +160) -hsync
Vertical: 1152 1155 1160 1185 (+3 +8 +33) +vsync
Frequencies: 156.75 MHz, 70.99 kHz, 59.91 Hz
Driver Info #0:
Max. Resolution: 2048x1152
Vert. Sync Range: 56-60 Hz
Hor. Sync Range: 30-81 kHz
Bandwidth: 156 MHz
Config Status: cfg=new, avail=yes, need=no, active=unknown
37: None 00.1: 10002 LCD Monitor
[Created at monitor.95]
Unique ID: jyhG.Yo++45YyP32
Hardware Class: monitor
Model: "SAMSUNG SyncMaster"
Vendor: SAM "SAMSUNG"
Device: eisa 0x041f "SyncMaster"
Serial ID: "H9XS204742"
Resolution: 640x480@60Hz
Resolution: 800x600@56Hz
Resolution: 800x600@60Hz
Resolution: 1024x768@60Hz
Resolution: 1280x1024@60Hz
Resolution: 1280x960@60Hz
Resolution: 2048x1152@60Hz
Size: 510x287 mm
Detailed Timings #0:
Resolution: 2048x1152
Horizontal: 2048 2096 2128 2208 (+48 +80 +160) -hsync
Vertical: 1152 1155 1160 1185 (+3 +8 +33) +vsync
Frequencies: 156.75 MHz, 70.99 kHz, 59.91 Hz
Driver Info #0:
Max. Resolution: 2048x1152
Vert. Sync Range: 56-60 Hz
Hor. Sync Range: 30-81 kHz
Bandwidth: 156 MHz
Config Status: cfg=new, avail=yes, need=no, active=unknown
cat /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Reply to: