Creative Labs SB Audigy LS / Lenny stable bringt kein Ton raus
Hallo,
vor kurzem war hier bereits ein Thread mit ähnlichem Problem
http://lists.debian.org/debian-user-german/2009/03/msg00724.html
Die Lösung bringt mich aber nicht weiter.
Habe ebenfalls eine Creative Labs SB Audigy LS Soundcard im Rechner
(Lenny stable), ich kann alle Soundeinstellungen im KDE-Kontrollzentrum
bedienen, keine Fehlermeldung, Player spielt alles ab, aber es kommt
absolut kein Ton raus.
lspci -v gibt dies aus:
[...]
05:04.0 Multimedia audio controller: Creative Labs SB Audigy LS
Subsystem: Creative Labs SB0312 Audigy LS
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at e800 [size=32]
Capabilities: [dc] Power Management version 2
Kernel driver in use: CA0106
Kernel modules: snd-ca0106
05:04.1 Input device controller: Creative Labs SB Audigy LS Game Port
Subsystem: Creative Labs SB0312 Audigy LS MIDI/Game port
Flags: bus master, medium devsel, latency 64
I/O ports at e880 [size=8]
Capabilities: [dc] Power Management version 2
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp
[...]
lsmod | grep snd zeigt dies an:
snd_emu10k1x 13508 0
snd_emu10k1_synth 5664 0
snd_emux_synth 27936 1 snd_emu10k1_synth
snd_seq_virmidi 4896 1 snd_emux_synth
snd_seq_midi_emul 5376 1 snd_emux_synth
snd_emu10k1 115200 1 snd_emu10k1_synth
firmware_class 6816 1 snd_emu10k1
snd_util_mem 4032 2 snd_emux_synth,snd_emu10k1
snd_hwdep 6212 2 snd_emux_synth,snd_emu10k1
snd_ca0106 27584 0
snd_ac97_codec 88484 3 snd_emu10k1x,snd_emu10k1,snd_ca0106
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62596 5
snd_emu10k1x,snd_emu10k1,snd_ca0106,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 2660 0
snd_seq_oss 24992 0
snd_seq_midi 5728 0
snd_rawmidi 18496 5
snd_emu10k1x,snd_seq_virmidi,snd_emu10k1,snd_ca0106,snd_seq_midi
snd_seq_midi_event 6432 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_seq 41456 9
snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17800 3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device 6380 8
snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45604 15
snd_emu10k1x,snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_hwdep,snd_ca0106,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
ac97_bus 1728 1 snd_ac97_codec
snd_page_alloc 7816 4
snd_emu10k1x,snd_emu10k1,snd_ca0106,snd_pcm
cat /dev/sndstat zeigt dies an:
Sound Driver:3.8.1a-980706 (ALSA v1.0.16 emulation code)
Kernel: Linux workstation 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC
2009 i686
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
AudigyLS [SB0310] at 0xe800 irq 21
Audio devices:
0: CA0106 (DUPLEX)
Synth devices: NOT ENABLED IN CONFIG
Midi devices:
0: CA0106 MPU-401 (UART)
Timers:
7: system timer
Mixers:
0: SigmaTel STAC9721,23
Kernel habe ich diesen
uname -a
Linux workstation 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686
GNU/Linux
Weiss jemand weiter, verstehe nicht, dass kein Ton heraus kommt.
Wäre super, wenn jemand helfen könnte...
Gruss Roland
Reply to: