Re: Fullscreen nicht gesplittet auf zwei Monitore
Martin Wilske schrieb:
> Hallo Liste,
>
> auch etwas Recherche hat mir nicht bei der Lösung des folgenden
> "kleinen" (?) Problems geholfen.
> Ich arbeite mit zwei gleichen Monitoren, die auch wunderbar zusammen
> (aka "Screen1" LeftOf "Screen0") funktionieren. Möchte ich nun jedoch
> eine Anwendung im Vollbildmodus starten, bzw. wird der Vollbildmodus
> verwendet, so wird das Bild auf beide Monitore "aufgeteilt", jeder
> Monitor bekommt gerechterweise die Hälfte des Vollbildes zur
> Darstellung. Doch der schmale Balken der TFT-Ränder stört in der Mitte,
> sodass ich gern irgendwo festlegen möchte, dass Vollbild entweder auf
> einen bestimmten Monitor ausgegeben wird oder halt das Vollbild (von
> z.B. 1280x1024) entweder ganz links oder ganz rechts in der verfügbaren
> Fläche (2560x1024) dargestellt werden soll.
> Stand jemand vor dem gleichen Problem? Und/oder hat jemand eine Lösung
> dafür?
>
> Als Graphikkarte unterstützt mich eine 7600er Nvidia, sollte aber
> eigentlich nicht mit dem Treiber zusammenhängen, sondern eher ne
> xorg.conf-Sache sein, oder?
>
> Vielen Dank schonmal und viele Grüße aus Dresden.
>
> Martin
>
Moin Martin,
ich habe auch so eine Equipment, aber beim Maximieren eines Fensters
bleibt dieses auf einem Monitor. Auch meine xorg.conf sollst Du haben.
Ich habe auch eine NVidia-Karte und benutze gnome. Hast Du so einen
NVIDIA x-Server Settings - Assistenten? Welchen Treiber benutzt Du? Ich
benutze den Proprietären....
Grüße,
Boris
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Fri Jan 11 15:06:57 PST 2008
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Fri Jan 11 15:05:59 PST 2008
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
Option "XkbOptions" "compose:rctrl"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "*191*"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "IGM Communications *191*"
HorizSync 26.0 - 83.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "nVidia Corporation NV43 [GeForce 6600 GT]"
Driver "nvidia"
Option "AddARGBGLXVisuals" "True"
Option "AllowGLXWithComposite" "True"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
Option "AddARGBGLXVisuals" "True"
Option "AllowGLXWithComposite" "True"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600 GT"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV43 [GeForce 6600 GT]"
Monitor "*191*"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-0: 1152x864 +0+0, DFP-1: nvidia-auto-select +1152+0; DFP-0: 1024x768 +0+0, DFP-1: nvidia-auto-select +1024+0; DFP-0: 832x624 +0+0, DFP-1: nvidia-auto-select +832+0; DFP-0: 800x600 +0+0, DFP-1: nvidia-auto-select +800+0; DFP-0: 640x480 +0+0, DFP-1: nvidia-auto-select +640+0"
EndSection
Reply to: