[GELÖST] - [OT] USB-Hub: reicht passiv?
Hallo und Danke an alle die bei der Entscheidung geholfen haben.
Habe gerade ein Hub [¹] geholt. Bisher klappt alles wunderbar.
Zitat auf der Verpackung:
{
Beim Anschluss von bis zu zwei Hi-Speed-Geräten ist kein Netzteil
erforderlich.
}
Server -> 5m Aktiv-Verlängerung -> Hub ->
-> Drucker mit "normalem" USB-Kabel (1,8m?)
-> Webcam mit billigem (weil dünnem) 3m USB-Kabel
-> frei
-> frei
Ohne die 2 freien Ports belegt zu haben tuts beides beim ersten Test.
Bilder werden gestreamt und Testseite kam raus.
(Welches Gerät was gemacht hat überlass’ ich Eurer Fantasie :-D )
Zur Vollständigkeit die Ausgabe von "lsusb -vs" [²].
MfG, Chris......
[¹]
Gerät: Belkin F5U234eaAPL-S; Hi-Speed USB 2.0 4-Port Hub, Aktiv.
Passiv, also ohne mitgeliefertes Netzteil betrieben.
Mediamarkt ~25,- Euro.
[²]
{
Bus 001 Device 044: ID 050d:0234 Belkin Components F5U234 USB 2.0 4-Port Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x050d Belkin Components
idProduct 0x0234 F5U234 USB 2.0 4-Port Hub
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x0000
Ganged power switching
Ganged overcurrent protection
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 1 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0103 power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 2 TT per port
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
}
Reply to: