Hallo Liste,
mein CD-Rom tut nur noch sporadisch funktionieren und ich weiss nicht,
ob ich was falsch eingestellt habe:
Im Einsatz: Debian Etch
Kernel: 2.6.21.5 (handmade)
host:/# lsmod | grep ata
ata_piix 14788 0
ata_generic 8260 0
libata 109396 3 ata_piix,ata_generic,ahci
scsi_mod 134124 5 sbp2,sg,sr_mod,sd_mod,libata
host:/# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: TOSHIBA MK8034GS Rev: AH30
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: HL-DT-ST Model: DVDRAM GSA-4084N Rev: KQ09
Type: CD-ROM ANSI SCSI revision: 05
host:/# cat /proc/sys/dev/cdrom/info
CD-ROM information, Id: cdrom.c 3.20 2003/12/17
drive name: sr0
drive speed: 24
drive # of slots: 1
Can close tray: 1
Can open tray: 1
Can lock tray: 1
Can change speed: 1
Can select disk: 0
Can read multisession: 1
Can read MCN: 1
Reports media changed: 1
Can play audio: 1
Can write CD-R: 1
Can write CD-RW: 1
Can read DVD: 1
Can write DVD-R: 1
Can write DVD-RAM: 1
Can read MRW: 1
Can write MRW: 1
Can write RAM: 1
host:/# cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0
0
Passt des alles so?
Vielen Dank im voraus!