Re: TFT ausserhalb der Spezifikation
Am Mittwoch, den 28.03.2007, 20:55 +0200 schrieb Ralf Schmidt:
> Hallo liebe Liste,
>
> ich habe mir eine neue Matrox G550 Grafikkarte zugelegt.
> Jedoch bekomme ich sie nicht ans Laufen bzw. mein Monitor ( LG 1710 P)
> spielt nicht mit.
> Ich hatte die alten Karte, eine Nvidia Gforce4, ausgebaut und die neue
> Matrox eingebaut, anschließend den Rechner gestartet.
>
> xorg erkennt scheinbar alles, jedoch bleibt der Monitor bei umschalten in
> den grafischen Modus schwarz. Dann kommt "Ansteuerung ausserhalb der
> Spezifikation".
> Hier meine Letzte xorg.conf: (Ohne Maus und Keyboard einträge)
>
> Section "Module"
> Load "bitmap"
> #Load "ddc" # war anfangs aktiviert
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "vbe"
> EndSection
>
> Section "Device"
> Identifier "Matrox Graphics, Inc. MGA G550 AGP"
> Driver "mga"
> BusID "PCI:2:0:0"
> EndSection
>
> Section "Monitor"
> Identifier "L1710P"
> Option "DPMS"
> HorizSync 30-71
> #VertRefresh 56-75 # Originalwert
> VertRefresh 56-60
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device "Matrox Graphics, Inc. MGA G550 AGP"
> Monitor "L1710P"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> Modes "1152x864@60" "1024x768@60"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Default Screen"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
>
> Und hier noch die Ausgabe von ddcprobe
> vbe: VESA 3.0 detected.
> oem: Matrox Graphics Inc.
> vendor: Matrox
> product: Matrox G550 00
> memory: 32768kb
> mode: 640x480x256
> mode: 640x480x32k
> mode: 640x480x64k
> mode: 640x480x16m
> mode: 800x600x16
> mode: 800x600x256
> mode: 800x600x32k
> mode: 800x600x64k
> mode: 800x600x16m
> mode: 1024x768x256
> mode: 1024x768x32k
> mode: 1024x768x64k
> mode: 1024x768x16m
> mode: 1280x1024x256
> mode: 1280x1024x32k
> mode: 1280x1024x64k
> mode: 1280x1024x16m
> edid:
> edid: 1 3
> id: 4388
> eisa: GSM4388
> serial: 000072f7
> manufacture: 2 2004
> input: separate sync, composite sync, sync on green, analog signal.
> screensize: 34 27
> gamma: 2.200000
> dpms: RGB, active off, suspend, standby
> timing: 720x400@70 Hz (VGA 640x400, IBM)
> timing: 640x480@60 Hz (VGA)
> timing: 640x480@75 Hz (VESA)
> timing: 800x600@60 Hz (VESA)
> timing: 800x600@75 Hz (VESA)
> timing: 1024x768@87 Hz Interlaced (8514A)
> timing: 1024x768@70 Hz (VESA)
> timing: 1024x768@75 Hz (VESA)
> ctiming: 640x480@75
> ctiming: 800x600@75
> ctiming: 1024x768@75
> ctiming: 1280x1024@60
> dtiming: 1280x1024@70
> monitorrange: 30-71, 56-75
> monitorname: L1710P
> monitorname:
>
>
> Ich habe schon die verschiedensten Variantionen ausprobiert und gurgel
> bemüht. Eine Lösung oder auch nur einen Ansatz dazu habe ich nicht
> gefunden.
>
> Ich hoffe hier kann man mir helfen.
>
> Vielen Dank im voraus.
>
> Gruß
> Ralf
>
> PS: Die Xorg.log kann ich auch noch schicken. Jedoch habe ich keine WW
> oder EE darin gesehen.
>
>
Hi
Schreib mal in deine 'xorg.conf' die richtigen Auflösungen die der
Monitor auch kann.
Section "Screen"
[.....]
SubSection "Display"
Depth 24
Modes "1280x1024@70" "1024x768@75" "800x600@75" "640x480@75"
EndSubSection
EndSection
Der erste Wert bei Modes ist bei dir eine Auflösung die der Monitor
nicht unterstützt.
In der Section Monitor solltest du den Wert von 'VertRefresh' auf
'56-75' setzen, da der Monitor ebenfalls diese Werte unterstützt.
mfG Sascha
Reply to: