Re: Falsche Auflösung, aber xorg.conf korrekt!?
Steven Breuer schrieb:
Danke für die schnelle Antwort.
Ja, der Treiber wird geladen.
K.
Normalerweise mach ich kein Topposting [Log bisschen gekürzt]:
Schuss in den Ofen:
Tippe auf falsche Einstellung bei KHz/Hz?
(Meldungen out of range?) ...
Hast die Angaben mit dem (hoffentlich vorhandenen) Datenblatt des
(Laptop?) LCDs abgeglichen?
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.15.7 i686
Current Operating System: Linux stbr-laptop 2.6.15-23-386 #1 PREEMPT Tue
May 23 13:49:40 UTC 2006 i686
Build Date: 16 March 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 7 16:02:20 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Standardbildschirm"
(**) | |-->Device "NVIDIA Corporation NV17 [GeForce4 420 Mac
32M/GeForce 440 Go 64M]"
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xE8000000
(--) NVIDIA(0): MMIO registers at 0xE1000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 440 Go 64M
(--) NVIDIA(0): VideoBIOS: 04.17.00.61.55
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(II) NVIDIA(0): Connected display device(s): DFP-0
(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(WW) NVIDIA(0): The user specified HorizSync "28.000-64.000" has been
adjusted
(WW) NVIDIA(0): to "29.000-48.000" (the intersection with
EDID-specified
(WW) NVIDIA(0): HorizSync "29.000-48.000")
(II) NVIDIA(0): Standardbildschirm: Using hsync range of 29.00-48.00 kHz
(II) NVIDIA(0): Standardbildschirm: Using vrefresh range of 43.00-60.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
Das gefällt mir nicht:
(II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
[...]
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(WW) (1024x768,Standardbildschirm) mode clock 194.02MHz exceeds DDC
maximum 90MHz
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using mode "1280x854" (no mode of this name)
Das sieht nicht gut aus ...
(WW) NVIDIA(0): Not using mode "1152x768":
(WW) NVIDIA(0): horizontal sync start (1178) not a multiple of 8
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device DFP-0:
(**) NVIDIA(0): Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "640x384": 40.1 MHz, 47.7 kHz, 60.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 768
Würde heissen dass 1280 x768 genommen wird?
Was kann denn das Display max., wie ist die "max. Auflösung"?
(--) NVIDIA(0): Display dimensions: (320, 210) mm
(--) NVIDIA(0): DPI set to (101, 92)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
[...]
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type:
Other)
(II) XINPUT: Adding extended input device "NVIDIA Kernel Input Handler"
(type: Other)
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(--) Synaptics Touchpad touchpad found
Synaptics DeviceOff called
(II) NVIDIA(0): Setting mode "1280x768"
Synaptics DeviceOn called
(--) Synaptics Touchpad touchpad found
(II) Configured Mouse: ps2EnableDataReporting: succeeded
ProcXCloseDevice to close or not ?
Grüße
Steven
hth
MH
Reply to: