Scsi

[Boris Höffgen <borish@hjdt.de>]

Hallo,

anbei ein Auszug aus dem Log während des Bootprozesses.
Mit Kernel 2.6 wird die SCSI-Festplatte nicht mehr erkannt.
Was kann ich tun?

Oct 14 13:19:31 fs1 kernel: SCSI subsystem initialized
Oct 14 13:19:31 fs1 kernel: PCI: Found IRQ 12 for device 0000:00:09.0
Oct 14 13:19:31 fs1 kernel: scsi0 : Tekram DC390/AM53C974 V2.1d 2004-05-27
Oct 14 13:19:31 fs1 kernel: Using anticipatory io scheduler
Oct 14 13:19:31 fs1 kernel:   Vendor: SCANNER   Model: 
 Rev: 1.06
Oct 14 13:19:31 fs1 kernel:   Type:   Scanner 
 ANSI SCSI revision: 01 CCS
Oct 14 13:19:31 fs1 kernel: DC390: Target 6: Sync transfer 10.0 MHz, 
Offset 15
Oct 14 13:19:31 fs1 kernel: DC390: pSRB == pTmpSRB! (TagQ Error?) (06-0)
Oct 14 13:19:31 fs1 kernel: DC390: Abort command (pid 8, Device 06-00)
Oct 14 13:19:31 fs1 kernel: DC390: SRB: Xferred 00000000, Remain 
00000000, State 00000000, Phase 01
Oct 14 13:19:31 fs1 kernel: DC390: AdpaterStatus: 00, SRB Status 00
Oct 14 13:19:31 fs1 kernel: DC390: Status of last IRQ (DMA/SC/Int/IRQ): 
0891c910
Oct 14 13:19:31 fs1 kernel: DC390: Register dump: SCSI block:
Oct 14 13:19:31 fs1 kernel: DC390: XferCnt  Cmd Stat IntS IRQS FFIS Ctl1 
Ctl2 Ctl3 Ctl4
Oct 14 13:19:31 fs1 kernel: DC390:  000000   1a   11   81   00   2f   17 
  48   18   04
Oct 14 13:19:31 fs1 kernel: DC390: FIFO: 00 00 02 02 81 00 00 1a 51 55 
41 4e 54 55 4d
Oct 14 13:19:31 fs1 kernel: DC390: Register dump: DMA engine:
Oct 14 13:19:31 fs1 kernel: DC390: Cmd   STrCnt    SBusA    WrkBC 
WrkAC Stat SBusCtrl
Oct 14 13:19:31 fs1 kernel: DC390:  80 00000024 0033ae40 00000000 
0033ae64   00 03185220
Oct 14 13:19:31 fs1 kernel: DC390: Register dump: PCI Status: 0200
Oct 14 13:19:31 fs1 kernel: DC390: In case of driver trouble read 
Documentation/scsi/tmscsim.txt
Oct 14 13:19:31 fs1 kernel: DC390: Aborted pid 8 with status 0
Oct 14 13:19:31 fs1 kernel: DC390: RESET ... done
Oct 14 13:19:31 fs1 kernel: scsi: Device offlined - not ready after 
error recovery: host 0 channel 0 id 6 lun 0
Oct 14 13:19:31 fs1 kernel: scsi scan: 134 byte inquiry failed with code 
327680.  Consider BLIST_INQUIRY_36 for this device
Oct 14 13:19:31 fs1 kernel: scsi0 (6:0): rejecting I/O to offline device

Gruß
Boris