usb 2.0 card reader hama - kein Zugriff
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hallo @ All!
Ich habe hier auf einmal ein Prob mit meinem hama Card Reader und zwar
in der Form, als das ich ihn nicht ansprechen kann!
`------------------------------------------------------------------------------
| debian:/home/niels# lsusb -v
|
| Bus 001 Device 001: ID 0000:0000
| Device Descriptor:
| bLength 18
| bDescriptorType 1
| bcdUSB 1.00
| bDeviceClass 9 Hub
| bDeviceSubClass 0 Unused
| bDeviceProtocol 0
| bMaxPacketSize0 8
| idVendor 0x0000
| idProduct 0x0000
| bcdDevice 0.00
| iManufacturer 0
| iProduct 2 USB UHCI Root Hub
| iSerial 1 fce0
| bNumConfigurations 1
| Configuration Descriptor:
| bLength 9
| bDescriptorType 2
| wTotalLength 25
| bNumInterfaces 1
| bConfigurationValue 1
| iConfiguration 0
| bmAttributes 0x40
| Self Powered
| MaxPower 0mA
| Interface Descriptor:
| bLength 9
| bDescriptorType 4
| bInterfaceNumber 0
| bAlternateSetting 0
| bNumEndpoints 1
| bInterfaceClass 9 Hub
| bInterfaceSubClass 0 Unused
| bInterfaceProtocol 0
| iInterface 0
| Endpoint Descriptor:
| bLength 7
| bDescriptorType 5
| bEndpointAddress 0x81 EP 1 IN
| bmAttributes 3
| Transfer Type Interrupt
| Synch Type None
| Usage Type Data
| wMaxPacketSize 0x0008 1x 8 bytes
| bInterval 255
| Hub Descriptor:
| bLength 9
| bDescriptorType 41
| nNbrPorts 2
| wHubCharacteristic 0x0000
| Ganged power switching
| Ganged overcurrent protection
| bPwrOn2PwrGood 1 * 2 milli seconds
| bHubContrCurrent 0 milli Ampere
| DeviceRemovable 0x08
| PortPwrCtrlMask 0xe8
| Hub Port Status:
| Port 1: 0000.0100 power
| Port 2: 0000.0103 power enable connect
| Bus 001 Device 002: ID 0dda:2005 Integrated Circuit Solution, Inc.
| Device Descriptor:
| bLength 18
| bDescriptorType 1
| bcdUSB 2.00
| bDeviceClass 0 (Defined at Interface level)
| bDeviceSubClass 0
| bDeviceProtocol 0
| bMaxPacketSize0 64
| idVendor 0x0dda Integrated Circuit Solution, Inc.
| idProduct 0x2005
| bcdDevice 93.17
| iManufacturer 3 Hama
| iProduct 4 Card Reader
| iSerial 5 000000000013
| bNumConfigurations 1
| Configuration Descriptor:
| bLength 9
| bDescriptorType 2
| wTotalLength 32
| bNumInterfaces 1
| bConfigurationValue 1
| iConfiguration 0
| bmAttributes 0x80
| MaxPower 500mA
| Interface Descriptor:
| bLength 9
| bDescriptorType 4
| bInterfaceNumber 0
| bAlternateSetting 0
| bNumEndpoints 2
| bInterfaceClass 8 Mass Storage
| bInterfaceSubClass 6 SCSI
| bInterfaceProtocol 80 Bulk (Zip)
| iInterface 6 ?i?|??
| Endpoint Descriptor:
| bLength 7
| bDescriptorType 5
| bEndpointAddress 0x81 EP 1 IN
| bmAttributes 2
| Transfer Type Bulk
| Synch Type None
| Usage Type Data
| wMaxPacketSize 0x0040 1x 64 bytes
| bInterval 0
| Endpoint Descriptor:
| bLength 7
| bDescriptorType 5
| bEndpointAddress 0x02 EP 2 OUT
| bmAttributes 2
| Transfer Type Bulk
| Synch Type None
| Usage Type Data
| wMaxPacketSize 0x0040 1x 64 bytes
| bInterval 0
| Device Qualifier (for other device speed):
| bLength 10
| bDescriptorType 6
| bcdUSB 2.00
| bDeviceClass 0 (Defined at Interface level)
| bDeviceSubClass 0
| bDeviceProtocol 0
| bMaxPacketSize0 64
| bNumConfigurations 1
|
|
| debian:/home/niels# lsmod
| Module Size Used by Not tainted
| soundcore 3940 0 (autoclean)
| input 3648 0 (autoclean)
| apm 9964 1 (autoclean)
| parport_pc 23880 1 (autoclean)
| lp 6724 0 (autoclean)
| parport 26504 1 (autoclean) [parport_pc lp]
| af_packet 13000 1 (autoclean)
| usb-storage 65088 0 (unused)
| usb-uhci 23344 0 (unused)
| usbcore 62924 1 [usb-storage usb-uhci]
| ide-scsi 10032 0
| scsi_mod 95108 2 [usb-storage ide-scsi]
| 3c59x 27152 1
| agpgart 46244 0 (unused)
| ide-cd 31296 1
| cdrom 29828 0 [ide-cd]
| rtc 6440 0 (autoclean)
| ext3 81068 1 (autoclean)
| jbd 42468 1 (autoclean) [ext3]
| ide-detect 288 0 (autoclean) (unused)
| piix 9096 1 (autoclean)
| ide-disk 16800 2 (autoclean)
| ide-core 108568 3 (autoclean) [usb-storage ide-scsi
ide-cd ide-detect piix ide-disk]
| unix 14960 219 (autoclean)
`---------------------------------------------------------------------------------------------------------------------
Also, da ist das gute Stück ja und usb Module sind doch auch da, aber
warum komme ich nicht an die Daten (Fotos) auf der SD? Ein raus und
wieder reinstöpseln (Karte/Reader) hat nichts gebracht!
Und nach einem manuellen /mount -t vfat /dev/sda/media/cardreader /hat
sich auchg nichts getan!
Wer weiss Rat und Hilfe?
Besten Dank im voraus
Niels
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFEF+P2ZdugMcut97URAoV4AJ9N6saU++YojqbRLGyKUrxU4veVvgCfcD/S
P+NxRdILoGuGC6NyBHCpnzs=
=h3x9
-----END PGP SIGNATURE-----
Reply to: